• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.185-191
• /
• 2002

In this study a 3-dimensional analytical model is developed, which can analyses dynamic responses of curved bridges subject to moving vehicles. A 5-axle semi-trailer is modeled to simulate the actual tire forces that are redistributed by vehicle rolling effect due to the centrifugal force. The 1-span curved bridge with two steel box girders is modeled using the frame elements. The dynamic response characteristics of curved box girder bridges are examined and compared for two different support conditions. One is the case that two shoes are arranged at the outer sides of box girders with larger space between the two shoes and the other is that two shoes at the center of each box girder. In the curved bridges, the dynamic effect of moving vehicles influences the reaction force much more than other responses, such as displacement or stress, especially the upward reaction of inner-radius shoes. It is more advantageous for the reaction considering dynamic effect when shoes are arranged further at the outer sides of box girders than when shoes at the center of each box. The shoes for curved bridges with two-box girder system should be arranged to have larger distance.

• Journal of Biosystems Engineering
• /
• v.25 no.3
• /
• pp.203-212
• /
• 2000

One of the obstructing factors against managing large-scaled dairy farm in Korea has been heavy labor requirement for feeding dairy cows. A tractor attached TMR mixer was developed to reduce the cost and to provide economic benefit in this research. The TMR mixer was designed to have a feeding capacity of 35 heads at a batch with various functioning systems of paddle type mixer, cutter and grinder, delivery conveyor, weighing console, power transmission train, and mounting trailer. The maximum power required during the mixing operarion was 26.3 kw(P.T.O), readily available from 32kw-rated tractors, which had been widely used in Korea. Low coefficient of variation(14.0%) revealed an uniform mixing performance of the mixer. The mixer can also be used in compost mixing as well as concentrates and roughage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.132-138
• /
• 2014

The use of AGVs(Automated Guided Vehicles) are increasing in many factories. The most widely used AGV system is that magnetic tapes are attached on the factory floor to make guided path and an AGV equipped with a magnetic sensor follows the path by sensing magnetic flux. In this AGV system, usually a magnetic sensor is attached on the front end of an AGV to detect the guided path and the sensor generates analog voltages proportional to the magnetic flux. The problem is that the AGV in use has rather big tracking errors because the accurate orientation of the AGV can not be detected by using only one magnetic sensor. In this paper, we propose a method to minimize the path tracking errors. In our method, one additional sensor is attached on the rear end of the AGV to estimate the orientation of the AGV and to control more accurately the AGV according to the estimated orientation of the AGV. We performed several experiments and the results successfully show the feasibility of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.638-645
• /
• 2014

This paper presents results of a study for development and application of container massive transportation system. The system is aimed to improve competing power of Korean container ports. This paper selects Double stack Multi-Trailer System (DMTS) under consideration of pros-con analysis between three systems alternatives as well as operation process of existing Korean container terminal companies. An analysis of turning radius is undertaken for applying the system. Key elementary technologies was derived by patent analysis. DMTS has no problems in utilization to existing Korean container ports. Further, the system is expected to highly potential to improve operational efficiency in the container ports thanks to its high unit transportation capacity.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.7
• /
• pp.637-642
• /
• 2011

The DMT freight is judged that economic performance is good because can increase cargoes than existing freight. However, the existing freight cars, each with a different balance to the body structure is bogie because the vibrations may occur. Thus, by minimizing vibration over the existing freight securing the safety of the driving if you will not have major problems in cargoes. In this study, multi-body dynamic analysis tool, VI-Rail using the actually Gyeongbu Railroad line and an empty, full freight condition include curve radius, track irregularity, The DMT freight of the derailed wagons were assessed for safety analysis. Full and empty freight conditions for parity in the Gyeongbu Railroad line(Dongdaegoo${\leftrightarrow}$Kyungsan) derailment safety analysis, such as derailment coefficient and the wheel unloaded, echoing the curve and the orbit is affected by the irregularity was found. Full freight condition than the empty conditions showed a significant derailment safety. Overall, the limits of derailment coefficient(Q/P = 0.8) and wheel unload decrement limits(${\triangle}P/P$ = 0.6) is less safe with me confirmed that the derailment safety.

• Journal of the Korean Society for Library and Information Science
• /
• v.49 no.3
• /
• pp.15-36
• /
• 2015

This research aims at executing a after reading activity using book trailers for the teenagers, and verifying its effects. For the investigation into its effectiveness, 6 classes on the first grade in a middle school were divided into 3 classes of an experimental group (104 students) and the other 3 classes of a comparative group (100 students), and a preliminary and a post test were conducted using the measurement tool on creativity and reading attitudes. As the result, the creativity, reading attitudes and understanding of the selected books of the experimental group were found to be better than those of the comparative group.

• Journal of the Korean Society for Railway
• /
• v.6 no.2
• /
• pp.122-128
• /
• 2003

The acceptance test of KTX has been performed in Korea. During the test, lateral vibration of carbody over the accepted value called sway was found. Many activities have been taken to find the cause of the vibration and the counter-measure. KTX has 20 car trainset formation whose trailer cars are linked by articulate bogies. So this study is performed to see the effects of long trainset formation on vehicle dynamics and the train stability by 16 car vehicle model. Firstly the reliable vehicle model which shows well the tendencies appeared in the tests on the high speed test line is required to find the cause of lateral vibration and the countermeasure. Vehicle model was made for the analysis with VAMPIRE. The analysis results show that secondary air spring lateral stiffness is the most significant parameter to cause carbody lateral vibration. Mode analysis results show that the least damped mode shape is similar to the vibration pattern shown in the tests that the amplitude of the motion increases along the train set and decreases in the tail part. The lateral vibration was "appeared at the speed range between 100km/h and 200km/h and disappeared at the low speed and the high speed.

• Structural Engineering and Mechanics
• /
• v.71 no.3
• /
• pp.283-290
• /
• 2019

In global competition manufacturing companies have to produce modern, new constructions from advanced materials in order to increase competitiveness. The aim of my research was to develop a new composite cellular plate structure, which can be primarily used for structural elements of road, rail, water and air transport vehicles (e.g. vehicle bodies, ship floors). The new structure is novel and innovative, because all materials of the components of the newly developed structure are composites (laminated Carbon Fiber Reinforced Plastic (CFRP) deck plates with pultruded Glass Fiber Reinforced Plastic (GFRP) stiffeners), furthermore combines the characteristics of sandwich and cellular plate structures. The material of the structure is much more advantageous than traditional steel materials, due mainly to its low density, resulting in weight savings, causing lower fuel consumption and less environmental damage. In the study the optimal construction of a given geometry of a structural element of a road truck trailer body was defined by single- and multi-objective optimization (minimal cost and weight). During the single-objective optimization the Flexible Tolerance Optimization method, while during the multi-objective optimization the Particle Swarm Optimization method were used. Seven design constraints were considered: maximum deflection of the structure, buckling of the composite plates, buckling of the stiffeners, stress in the composite plates, stress in the stiffeners, eigenfrequency of the structure, size constraint for design variables. It was confirmed that the developed structure can be used principally as structural elements of transport vehicles and unit load devices (containers) and can be applied also in building construction.

• Journal of information and communication convergence engineering
• /
• v.20 no.4
• /
• pp.288-294
• /
• 2022

The media content market has been growing, as various types of content are being mass-produced owing to the recent proliferation of the Internet and digital media. In addition, platforms that provide personalized services for content consumption are emerging and competing with each other to recommend personalized content. Existing platforms use a method in which a user directly inputs video metadata. Consequently, significant amounts of time and cost are consumed in processing large amounts of data. In this study, keyframes and audio spectra based on the YCbCr color model of a movie trailer were extracted for the automatic generation of metadata. The extracted audio spectra and image keyframes were used as learning data for genre recognition in deep learning. Deep learning was implemented to determine genres among the video metadata, and suggestions for utilization were proposed. A system that can automatically generate metadata established through the results of this study will be helpful for studying recommendation systems for media super-personalization.

• Asia Marketing Journal
• /
• v.18 no.2
• /
• pp.45-61
• /
• 2016

Book adaptation has been considered an effective strategy in filmmaking. This paper examines the relationship between the box office sales and the performance of its original book focusing on category extension, especially investigating reciprocal spillover effect from a movie to the book. With empirical data, two-way causality between performance of the extension brand (i.e., movies) and that of the parent brand (i.e., books) was examined to test the existence of reciprocal spillover effect. In addition, a linear model was used to test the moderating roles of extension characteristics. The results revealed that the higher the movie's box office sales, the higher the original book's sales after movie's release. The authors also found moderation effects such that if the book has high level of brand awareness prior to movie's release, or if there is a movie tie-in version, or when the book is mentioned in movie trailer, or if the movie is released shortly after the book's publication, then the strength of spillover effect is superior. The current empirical investigation is meaningful considering it provides implications to both buyers and sellers of the extension rights, contributing to the literature of reciprocal spillover effects in category extension.