• 대한교통학회지
• /
• 제26권4호
• /
• pp.265-273
• /
• 2008

영상기반 교통감지시스템은 교통정보 수집을 기본으로 상충, 사고감지, 기후감지 등 다양한 정보를 수집하는 데 이용되고 있다. 본 논문은 VDS에서 검지영역을 설정할 때 단위거리별 픽셀길이를 자동 계산하여, 이를 기반으로 교통정보 및 상충정보를 수집하는 시스템을 개발한다. 본 알고리즘은 교차로에 검지영역 내 검지라인을 세분화하여 설정함으로써 교통정보의 정확도를 높이고, 개별차량의 교차로 통과속도 및 점유율을 자동으로 계산해 주며, 나아가 모든 교차로에 일반화하여 적용할 수 있다. 본 알고리즘은 분당교차로에 설치된 CCTV영상을 대상으로 실험하였으며, 상용화 제품과의 교통정보 비교분석을 통하여 알고리즘을 검증하였다.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.224-236
• /
• 2017

본 노인교통안전정책을 제시하기 위하여 경기지역에서 발생하고 있는 실제 지역유형별(도시지역, 도농복합지역, 농촌지역) 노인운전자의 교통사고 특성을 분석한 결과, 3개 지역 모두 안전운전의무 불이행에 의한 교통사고가 가장 많이 발생하는 것으로 나타났고, 도시지역과 도농복합지역은 신호위반과 교차로 사고, 그리고 농촌지역은 중앙선 침범에 의한 교통사고가 높은 것으로 나타났다. 도시지역과 도농복합지역은 신호운영에 있어서 오버랩 등 복잡한 신호운영보다는 단순한 양직진후 좌회전 또는 직진과 좌회전 동시신호 부여 등 단순한 신호 표출방안이 필요하다. 그리고 무신호교차로와 비보호교통신호 처리에 대한 개선이 필요하다. 게다가 농촌지역의 중앙선 침범사고를 예방하기 위하여 중앙선에 가드레일을 설치하여 중앙선 침범을 방지하고 반대방향 자동차 전조등에 의한 영향을 감소시켜야 하며, 해가 지는 일몰 시간대의 교통사고 예방을 위하여 운전 중에 파악해야 할 교통표지판 및 도로표지 등의 글자크기 확대와 형광글씨를 사용하여 시인성 개선해야 하며, 복잡한 문구와 여러 가지 정보보다는 단순화한 정보제공 문구와 최소의 정보제공으로 단순화해야 한다.

• 대한토목학회논문집
• /
• 제35권2호
• /
• pp.397-405
• /
• 2015

과거 고속도로는 이동성 중심의 기능을 주로 담당하였으나, 삶의 질 향상과 의식 수준의 향상에 따라 '빠른 고속도로'에서 '안전한 고속도로'로 고속도로 기능의 패러다임이 변화하고 있다. 고속도로 교통사고는 2012년 기준 3,550건이 발생하였으며, 371명이 교통사고로 사망한 것으로 집계되었고, 치사율은 일반국도의 약 2배에 달하는 것으로 보고되고 있다. 본 연구에서는 고속도로 주요 6개 노선을 대상으로 교통사고건수와 교통량 기반의 사고예측모형(안전성능함수)을 개발하였다. 안전성능함수는 각 노선별로 도로의 선형 및 규모 등이 달라 정확하게 각 노선을 예측하는데 어려움이 있을 것으로 판단되어, 6개 노선의 통합 안전성능함수를 구축하고, 각 노선별로 교통사고를 보정할 수 있는 계수를 산출하였다. 본 연구의 결과는 향후 교통사고 예방을 위한 노선별 교통안전 전략수립의 기초자료로 활용함으로써 보다 안전한 고속도로 관리에 기여할 것으로 판단된다. 향후에는 각 노선별 특성에 따른 그룹별 통합모형을 통한 노선별 보정계수를 산출하여 신뢰성 있는 사고 예측값을 제시하는 연구가 수행되어야 할 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.236-246
• /
• 2003

This paper is implemented a control algorithm in order to be stable and minimized to entire train traffic system at delayed case. Signal ing system is described wi th algebraic equations given for train headway, Discrete-event simulation principles are reviewed and a demonstration block signaling model using the technique is implemented. Train congestion at station entrance for short headway operation is demonstrated and the propagation of delays along a platform of trains from any imposed delay to the leading train is also shown. A rail way signaling system is by nature a distributed operation with event triggered at discrete intervals. Although the train kinematic variables of position, velocity, and acceleration are continually changing, the changes are triggered when the trains pass over section boundaries and arrive at signals and route switches. This paper deals with linear-mode1ing, stability and optimal control for the traffic on such metro line of the model is reconstructed in order to adapt the circuits. This paper propose optimal control laws wi th state feedback ensuring the stability of the modeled system for circuits. Simulation results show the benefit to be expected from an efficient traffic control. The main results are summarized as follows: 1. In this paper we develop a linear model describing the traffic for both loop lines, two state space equations have been analyzed. The first one is adapted to the situation where a complete nominal time schedule is available while second one is adapted when only the nominal time interval between trains is known, in both cases we show the unstability of the traffic when the proceeding train is delayed following properties, - They are easily implemented at law cost on existing lines. - They ensure the exponetial stability of loop system. 2. These control laws have been tested on a traffic simulation software taking into the non-linearites and the physical constraints on a metro line. By means of simulation, the efficiency of the proposed optimal control laws are shown.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.316-323
• /
• 1995

This paper presents an image processing technique to get traffic information such as vehicle volume, velocity, and occupancy for measuring the traffic congestion rate. To obtain these information, two horizontal lines are previously set on the screen. A moving vehicle is detected using the gray level difference on each line, and also template matching method at night. Threshold values are determined by sampling pavement grey level, and updated dynamically to cope with the change of ambient light conditions. These technique is successfully used to calculate vehicle volume, occupancy, and velocity. This study can be applied to traffic signal control system for minimizing traffic congestion in urban areas.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.617-630
• /
• 2019

Currently most of the vision-based structural identification research focus either on structural input (vehicle location) estimation or on structural output (structural displacement and strain responses) estimation. The structural condition assessment at global level just with the vision-based structural output cannot give a normalized response irrespective of the type and/or load configurations of the vehicles. Combining the vision-based structural input and the structural output from non-contact sensors overcomes the disadvantage given above, while reducing cost, time, labor force including cable wiring work. In conventional traffic monitoring, sometimes traffic closure is essential for bridge structures, which may cause other severe problems such as traffic jams and accidents. In this study, a completely non-contact structural identification system is proposed, and the system mainly targets the identification of bridge unit influence line (UIL) under operational traffic. Both the structural input (vehicle location information) and output (displacement responses) are obtained by only using cameras and computer vision techniques. Multiple cameras are synchronized by audio signal pattern recognition. The proposed system is verified with a laboratory experiment on a scaled bridge model under a small moving truck load and a field application on a footbridge on campus under a moving golf cart load. The UILs are successfully identified in both bridge cases. The pedestrian loads are also estimated with the extracted UIL and the predicted weights of pedestrians are observed to be in acceptable ranges.

• 한국게임학회 논문지
• /
• 제2권1호
• /
• pp.30-35
• /
• 2002

The deployment of multicast communication services in the Internet is expected to lead a stable packet transfer even in heavy traffic as in On-Line Game environment. The Core Based Tree scheme among many multicast protocols is the most popular and suggested recently. However, CBT exhibit two major deficiencies such as traffic concentration or poor core placement problem. So, measuring the bottleneck link bandwidth along a path is important for understanding the performance of multicast. We propose not only a definition of CBT's core link state that Steady-State(SS), Normal-State(NS) and Bottleneck State(BS) according to the estimation link speed rate, but also the changeover of multicast routing scheme for traffic overload. In addition, we introduce anycast routing tree, a efficient architecture for construct shard multicast trees.

• 한국IT서비스학회지
• /
• 제22권2호
• /
• pp.57-70
• /
• 2023

In order to establish an autonomous driving environment, it is necessary to study traffic safety and demand prediction by analyzing information generated from the transportation infrastructure beyond relying on sensors by the vehicle itself. In this paper, we propose a real-time traffic information generation method using sensor convergence technology of transportation infrastructure. The proposed method uses sensors such as cameras and radars installed in the transportation infrastructure to generate information such as crosswalk pedestrian presence or absence, crosswalk pause judgment, distance to stop line, queue, head distance, and car distance according to each characteristic. create information An experiment was conducted by comparing the proposed method with the drone measurement result by establishing a demonstration environment. As a result of the experiment, it was confirmed that it was possible to recognize pedestrians at crosswalks and the judgment of a pause in front of a crosswalk, and most data such as distance to the stop line and queues showed more than 95% accuracy, so it was judged to be usable.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.75-84
• /
• 2018

PURPOSES: This study analyzes feasibility for application white pavement markings in the roadways with median barrier. METHODS : By reviewing numerous relevant laws, standards, and operational cases, the white pavement markings' excellence was demonstrated. Driver's behavior was analyzed through a virtual driving experiment using driving simulator and field tests. RESULTS:First, white pavement markings are superior to yellow pavement markings in terms of visibility, economics, and safety. Second, as a result of virtual driving experiment, the color of line in the roadway with median barrier didn't affect the driver's behavior such as the average vehicle speed, the distance bias in the lane and the separation distance from the centerline. Third, field test demonstrated that the driver tended to recognize the median barrier as an obstacle. In addition, the central driving ratio in the lane was increased due to improving the visibility of line at night in case of the white pavement markings. CONCLUSIONS : The application of white pavement markings in the roadways with median barrier can enhance traffic safety by improving the visibility of line at night.

• International Journal of Computer Science & Network Security
• /
• 제24권3호
• /
• pp.142-150
• /
• 2024

A conceptual model represents an understanding of a system that is going to be developed, which in this research, a driving simulation software to study driver behavior at signalised intersections. Therefore, video observation was conducted to study driver compliance behaviour within the dilemma zone at signalised intersection, with regards to driver's distance from the stop line during yellow light interval. The video was analysed using Thematic Analysis and the data extracted from it was analysed using Chi-Square Independent Test. The Thematic Analysis revealed two major themes which were traffic situation and driver compliance behaviour. Traffic situation is defined as traffic surrounding the driver, such as no car in front and behind, car in front, and car behind. Meanwhile, the Chi-Square Test result indicates that within the dilemma zone, there was a significant relationship between driver compliance behaviour and driver's distance from the stop line during yellow light interval. The closer the drivers were to the stop line, the more likely they were going to comply. In contrast, drivers showed higher non-compliant behavior when further away from stop line. This finding could help in the development of conceptual model of driving simulation with purpose in studying driver behavior.