• Title/Summary/Keyword: traffic collection

Search Result 329, Processing Time 0.032 seconds

Performance Variations of AODV, DSDV and DSR Protocols in MANET under CBR Traffic using NS-2.35

  • Chandra, Pankaj;Soni, Santosh
    • International Journal of Computer Science & Network Security
    • /
    • v.22 no.7
    • /
    • pp.13-20
    • /
    • 2022
  • Basically Mobile Ad Hoc Network (MANET) is an autonomous system with the collection of mobile nodes, these nodes are connected to each other by using wireless networks. A mobile ad hoc network poses this quality which makes topology in dynamic manner. As this type of network is Ad Hoc in nature hence it doesn't have fixed infrastructure. If a node wishes to transfer data from source node to a sink node in the network, the data must be passed through intermediate nodes to reach the destination node, hence in this process data packet loss occurs in various MANET protocols. This research study gives a comparison of various Mobile Ad Hoc Network routing protocols like proactive (DSDV) and reactive (AODV, DSR) by using random topology with more intermediate nodes using CBR traffic. Our simulation used 50, 100, and 150 nodes variations to examine the performance of the MANET routing protocols. We compared the performance of DSDV, AODV and DSR, MANET routing protocols with the result of existing protocol using NS-2 environment, on the basis of different performance parameters like Packet Delivery Ratio, average throughput and average end to end delay. Finally we found that our results are better in terms of throughput and packet delivery ratio along with low data loss.

Analysis of Open Toll Segments in Urban Freeways (개방식고속도로 통행특성과 영업체계 전환분석)

  • Nam, Du-Hui
    • Journal of Korean Society of Transportation
    • /
    • v.25 no.5
    • /
    • pp.101-109
    • /
    • 2007
  • Two variations of toll roads exist: mainline toll plazas and entry/exit tolls. On a mainline toll system(open toll scheme), all vehicles stop at various locations along the highway to pay a toll. While this may save money from the lack of need to construct tolls at every exit, it can cause lots of traffic congestion, and drivers could evade tolls by going around them. With entry/exit tolls, vehicles collect a ticket when entering the highway, which displays the fares it will pay when it exits, increasing in cost for distance travelled. Upon exit, the driver will pay the amount listed for the given exit. The pressures on the Seoul ring roadway network have been changing over time. In the past, the emphasis was on mobility and maintenance of the road network to provide an efficient transportation network, but recently, road use has outstripped the network's ability to extend and expand the road network and hence the policy emphasis has moved towards reducing free riders rather than mitigating its effects. In addition to this pressure is an incidental pressure, which argues that provision of free ride segments generates further traffic in isolation of other factors. This paper is examining policies to reduce the burden of traffic congestion in Seoul ring roadway which is used open toll scheme for decades. One key mechanism to achieve this policy aim is automatic charging mechanism on freeway, but if a nation-wide electronic toll collection is to be implemented successfully, there are a number of prerequisites which must be place.

Integration and Decision Algorithm for Location-Based Road Hazardous Data Collected by Probe Vehicles (프로브 수집 위치기반 도로위험정보 통합 및 판단 알고리즘)

  • Chae, Chandle;Sim, HyeonJeong;Lee, Jonghoon
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.17 no.6
    • /
    • pp.173-184
    • /
    • 2018
  • As the portable traffic information collection system using probe vehicles spreads, it is becoming possible to collect road hazard information such as portholes, falling objects, and road surface freezing using in-vehicle sensors in addition to existing traffic information. In this study, we developed a integration and decision algorithm that integrates time and space in real time when multiple probe vehicles detect events such as road hazard information based on GPS coordinates. The core function of the algorithm is to determine whether the road hazard information generated at a specific point is the same point from the result of detecting multiple GPS probes with different GPS coordinates, Generating the data, (3) continuously determining whether the generated event data is valid, and (4) ending the event when the road hazard situation ends. For this purpose, the road risk information collected by the probe vehicle was processed in real time to achieve the conditional probability, and the validity of the event was verified by continuously updating the road risk information collected by the probe vehicle. It is considered that the developed hybrid processing algorithm can be applied to probe-based traffic information collection and event information processing such as C-ITS and autonomous driving car in the future.

A Study on the Development Direction of Specialized Library in Road Traffic Field (도로교통분야 전문도서관 발전방향 모색에 관한 연구)

  • Kwak, Seung-Jin;Noh, Younghee;Chang, Inho;Ko, Jae Min
    • Journal of Korean Library and Information Science Society
    • /
    • v.53 no.2
    • /
    • pp.73-94
    • /
    • 2022
  • This study is a basic research for establishing a mid- to long-term development plan for the library of the Korea Expressway Corporation that can establish the vision and core values of the library and continuously grow by taking advantage of the specialization of the road transportation field in preparation for the 4th industrial revolution and post-corona era. The current state, satisfaction, and demand of the library were conducted for users of the Korea Expressway Corporation, and based on this, a mid- to long-term development plan was proposed. As a result of the research, first, the library of the Korea Expressway Corporation should provide information services to respond to the immediate information needs of its members as a library that supports academic and research activities as well as the comprehensive collection and preservation of related materials as a national road transportation representative library. Second, it is necessary to establish a systematic collection development policy, and it is necessary to collect collections by detailed themes related to road traffic. Third, overall service development is necessary, and Korea Expressway Corporation library homepage and mobile service should be developed. Lastly, space improvement must be made through space reorganization, and it is necessary to expand the usability through the introduction of the latest technology.

Intelligent Optimal Route Planning Based on Context Awareness (상황인식 기반 지능형 최적 경로계획)

  • Lee, Hyun-Jung;Chang, Yong-Sik
    • Asia pacific journal of information systems
    • /
    • v.19 no.2
    • /
    • pp.117-137
    • /
    • 2009
  • Recently, intelligent traffic information systems have enabled people to forecast traffic conditions before hitting the road. These convenient systems operate on the basis of data reflecting current road and traffic conditions as well as distance-based data between locations. Thanks to the rapid development of ubiquitous computing, tremendous context data have become readily available making vehicle route planning easier than ever. Previous research in relation to optimization of vehicle route planning merely focused on finding the optimal distance between locations. Contexts reflecting the road and traffic conditions were then not seriously treated as a way to resolve the optimal routing problems based on distance-based route planning, because this kind of information does not have much significant impact on traffic routing until a a complex traffic situation arises. Further, it was also not easy to take into full account the traffic contexts for resolving optimal routing problems because predicting the dynamic traffic situations was regarded a daunting task. However, with rapid increase in traffic complexity the importance of developing contexts reflecting data related to moving costs has emerged. Hence, this research proposes a framework designed to resolve an optimal route planning problem by taking full account of additional moving cost such as road traffic cost and weather cost, among others. Recent technological development particularly in the ubiquitous computing environment has facilitated the collection of such data. This framework is based on the contexts of time, traffic, and environment, which addresses the following issues. First, we clarify and classify the diverse contexts that affect a vehicle's velocity and estimates the optimization of moving cost based on dynamic programming that accounts for the context cost according to the variance of contexts. Second, the velocity reduction rate is applied to find the optimal route (shortest path) using the context data on the current traffic condition. The velocity reduction rate infers to the degree of possible velocity including moving vehicles' considerable road and traffic contexts, indicating the statistical or experimental data. Knowledge generated in this papercan be referenced by several organizations which deal with road and traffic data. Third, in experimentation, we evaluate the effectiveness of the proposed context-based optimal route (shortest path) between locations by comparing it to the previously used distance-based shortest path. A vehicles' optimal route might change due to its diverse velocity caused by unexpected but potential dynamic situations depending on the road condition. This study includes such context variables as 'road congestion', 'work', 'accident', and 'weather' which can alter the traffic condition. The contexts can affect moving vehicle's velocity on the road. Since these context variables except for 'weather' are related to road conditions, relevant data were provided by the Korea Expressway Corporation. The 'weather'-related data were attained from the Korea Meteorological Administration. The aware contexts are classified contexts causing reduction of vehicles' velocity which determines the velocity reduction rate. To find the optimal route (shortest path), we introduced the velocity reduction rate in the context for calculating a vehicle's velocity reflecting composite contexts when one event synchronizes with another. We then proposed a context-based optimal route (shortest path) algorithm based on the dynamic programming. The algorithm is composed of three steps. In the first initialization step, departure and destination locations are given, and the path step is initialized as 0. In the second step, moving costs including composite contexts into account between locations on path are estimated using the velocity reduction rate by context as increasing path steps. In the third step, the optimal route (shortest path) is retrieved through back-tracking. In the provided research model, we designed a framework to account for context awareness, moving cost estimation (taking both composite and single contexts into account), and optimal route (shortest path) algorithm (based on dynamic programming). Through illustrative experimentation using the Wilcoxon signed rank test, we proved that context-based route planning is much more effective than distance-based route planning., In addition, we found that the optimal solution (shortest paths) through the distance-based route planning might not be optimized in real situation because road condition is very dynamic and unpredictable while affecting most vehicles' moving costs. For further study, while more information is needed for a more accurate estimation of moving vehicles' costs, this study still stands viable in the applications to reduce moving costs by effective route planning. For instance, it could be applied to deliverers' decision making to enhance their decision satisfaction when they meet unpredictable dynamic situations in moving vehicles on the road. Overall, we conclude that taking into account the contexts as a part of costs is a meaningful and sensible approach to in resolving the optimal route problem.

Using Mobile Data Collectors to Enhance Energy Efficiency a nd Reliability in Delay Tolerant Wireless Sensor Networks

  • Yasmine-Derdour, Yasmine-Derdour;Bouabdellah-Kechar, Bouabdellah-Kechar;Faycal-Khelfi, Mohammed
    • Journal of Information Processing Systems
    • /
    • v.12 no.2
    • /
    • pp.275-294
    • /
    • 2016
  • A primary task in wireless sensor networks (WSNs) is data collection. The main objective of this task is to collect sensor readings from sensor fields at predetermined sinks using routing protocols without conducting network processing at intermediate nodes, which have been proved as being inefficient in many research studies using a static sink. The major drawback is that sensor nodes near a data sink are prone to dissipate more energy power than those far away due to their role as relay nodes. Recently, novel WSN architectures based on mobile sinks and mobile relay nodes, which are able to move inside the region of a deployed WSN, which has been developed in most research works related to mobile WSN mainly exploit mobility to reduce and balance energy consumption to enhance communication reliability among sensor nodes. Our main purpose in this paper is to propose a solution to the problem of deploying mobile data collectors for alleviating the high traffic load and resulting bottleneck in a sink's vicinity, which are caused by static approaches. For this reason, several WSNs based on mobile elements have been proposed. We studied two key issues in WSN mobility: the impact of the mobile element (sink or relay nodes) and the impact of the mobility model on WSN based on its performance expressed in terms of energy efficiency and reliability. We conducted an extensive set of simulation experiments. The results obtained reveal that the collection approach based on relay nodes and the mobility model based on stochastic perform better.

Design and Implementation of Internet Throats and Vulnerabilities Auto Collector for Cyber Threats Management (사이버위협 관리를 위한 인터넷 위협 및 취약점 정보 수집기 설계 및 구현)

  • Lee, Eun-Young;Paek, Seung-Hyun;Park, In-Sung;Yun, Joo-Beom;Oh, Hung-Geun;Lee, Do-Hoon
    • Convergence Security Journal
    • /
    • v.6 no.3
    • /
    • pp.21-28
    • /
    • 2006
  • Beginning flag security it was limited in Firewall but currently many information security solutions like Anti-virus, IDS, Firewall are come to be many. For efficiently managing different kinds of information security products ESM (Enterprise Security management) are developed and operated. Recently over the integrated security management system, TMS (Threat Management System) is rising in new area of interest. It follows in change of like this information security product and also collection information is being turning out diversification. For managing cyber threats, we have to analysis qualitative information (like vulnerabilities and malware codes, security news) as well as the quantity event logs which are from information security products of past. Information Threats and Vulnerability Auto Collector raises the accuracy of cyber threat judgement and can be utilized to respond the cyber threat which does not occur still by gathering qualitative information as well as quantity information.

  • PDF

A Development of Preprocessing Models of Toll Collection System Data for Travel Time Estimation (통행시간 추정을 위한 TCS 데이터의 전처리 모형 개발)

  • Lee, Hyun-Seok;NamKoong, Seong J.
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.8 no.5
    • /
    • pp.1-11
    • /
    • 2009
  • TCS Data imply characteristics of traffic conditions. However, there are outliers in TCS data, which can not represent the travel time of the pertinent section, if these outliers are not eliminated, travel time may be distorted owing to these outliers. Various travel time can be distributed under the same section and time because the variation of the travel time is increase as the section distance is increase, which make difficult to calculate the representative of travel time. Accordingly, it is important to grasp travel time characteristics in order to compute the representative of travel time using TCS Data. In this study, after analyzing the variation ratio of the travel time according to the link distance and the level of congestion, the outlier elimination model and the smoothing model for TCS data were proposed. The results show that the proposed model can be utilized for estimating a reliable travel time for a long-distance path in which there are a variation of travel times from the same departure time, the intervals are large and the change in the representative travel time is irregular for a short period.

  • PDF

A Study on the Design of the Grid-Cell Assessment System for the Optimal Location of Offshore Wind Farms (해상풍력발전단지의 최적 위치 선정을 위한 Grid-cell 평가 시스템 개념 설계)

  • Lee, Bo-Kyeong;Cho, Ik-Soon;Kim, Dae-Hae
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.24 no.7
    • /
    • pp.848-857
    • /
    • 2018
  • Recently, around the world, active development of new renewable energy sources including solar power, waves, and fuel cells, etc. has taken place. Particularly, floating offshore wind farms have been developed for saving costs through large scale production, using high-quality wind power and minimizing noise damage in the ocean area. The development of floating wind farms requires an evaluation of the Maritime Safety Audit Scheme under the Maritime Safety Act in Korea. Floating wind farms shall be assessed by applying the line and area concept for systematic development, management and utilization of specified sea water. The development of appropriate evaluation methods and standards is also required. In this study, proper standards for marine traffic surveys and assessments were established and a systemic treatment was studied for assessing marine spatial area. First, a marine traffic data collector using AIS or radar was designed to conduct marine traffic surveys. In addition, assessment methods were proposed such as historical tracks, traffic density and marine traffic pattern analysis applying the line and area concept. Marine traffic density can be evaluated by spatial and temporal means, with an adjusted grid-cell scale. Marine traffic pattern analysis was proposed for assessing ship movement patterns for transit or work in sea areas. Finally, conceptual design of a Marine Traffic and Safety Assessment Solution (MaTSAS) was competed that can be analyzed automatically to collect and assess the marine traffic data. It could be possible to minimize inaccurate estimation due to human errors such as data omission or misprints through automated and systematic collection, analysis and retrieval of marine traffic data. This study could provides reliable assessment results, reflecting the line and area concept, according to sea area usage.

Safe Driving Inducement Effect Analysis of Smart Delineator through Driving Simulation Evaluation (도로 주행 시뮬레이션 평가를 통한 스마트 델리네이터의 안전운전 유도 효과분석)

  • Ko, Han-Geom;Kim, Ji-Ho;Seong, Myung-Jae;Lee, Jin-Soo
    • Journal of Korean Society of Transportation
    • /
    • v.30 no.4
    • /
    • pp.43-59
    • /
    • 2012
  • Assuming a completed Smart Highway road & communication environment that allows real-time information collection and transmission of road traffic condition ahead, the purpose of this study is to develop a plan for inducing a network-level safe driving pattern by providing road traffic condition and safety information to multiple drivers through a road information provision device. In this study, the device with a function that displays different colors according to the hazard level to the existing delineator has been named 'Smart Delineator'. Smart Delineator is a device that provides not only alignment information but also safety information for drivers to receive real-time warning information and intuitively recognize road traffic condition ahead so that drivers can respond. To examine the effects of safety driving inducement level on drivers, a simulation test was conducted using driving simulator as well as a satisfaction survey. The result showed that the Smart Delineator was able to identify the location of occurrence and affecting driving according pattern, either adhering to recommended speed or reducing speed according to the pre-defined hazard level.