• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.39-44
• /
• 2004

In this thesis, two test flights were conducted in Gwacheon and Suwon area to evaluate the performance of accuracy and efficiency through the analysis of results among the three photogrammetric methods, that is, traditional photogrammetry, GPS -Photogrammetry and GPS/INS-Photogrammetry. Test results shows that a large variety of advantages of GPS-Photogrammetry and GPS/INS-Photogrammetry against traditional photogrammetry is to be verified. Especially, the number of ground control points for the exterior orientation could be saved more than 70-80%, and the cost for map production 30-50%, respectively. In addition, it was convinced that the large reduction of control points has not any effect on the block accuracy. It was also proved that the number of required ground control points for GPS/INS-Photogrammetry, is similar to that of GPS-Photogrammetry. Therefore it should be noted that GPS -Photogrammetry is more efficient in the aspect of reduction of mapping cost against GPS/INS-Photogrammetry, installing only an existing GPS receiver on survey aircraft to avoid high economic burden of procurement for integrated GPS/INS equipment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.285-291
• /
• 2004

GPS photogrammetry or the GPS/INS photogrammetry, which are based on the direct measurement of the projection centers and attitude at the moment of camera exposure time through loading the GPS receiver or INS in aircraft. Both photogrammetric methods can offer us to acquire the exterior orientation parameters with only minimum ground control points, even the ground control process could be completely skipped. Consequently, we can drastically reduce the time and cost for the mapping process. In this thesis, test flight was conducted in Suwon area to evaluate the performance of accuracy and efficiency through the analysis of results among the three photogrammetric methods, that is, traditional photogrammetry, GPS photogrammetry and GPS/INS photogrammetry. Test results shows that a large variety of advantages of GPS photogrammetry and GPS/INS photogrammetry against traditional photogrammetry is to be verified. Especially, the number of ground control points for the exterior orientation could be saved more than 70～80%, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.177-186
• /
• 2009

Nowadays, as going to information society based knowledge, the informations are acquired, processed, serviced based digital environment. In surveying field, the trend have been changed from the analog foundation to the digital foundation. Also, aerial photogrammetry is being changed from analog aerial photogrammetry to digital aerial photogrammetry. In this paper, the analysis of accuracy is performed for the comparison of traditional aerial photogrammetry with digital aerial photogrammetry usign UltracamX in AT and Block Adjustment. As the results, Bundle adjustment in digital aerial photogrammetry with GPS/INS have more advantages than traditional independent adjustment in analog aerial photogrammetry. Digital aerial photogrammetry contributes the higher accuracy in AT and block adjustment more than analog aerial photogrammetry.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.151-158
• /
• 2006

As GPS 'selective availability' was turned off in 2000, GPS related fields and markets are explosively extended. In mapping area, GPS/INS aided photogrammetry proved it is much cost and time effective method keeping enough accuracy as compared with traditional photogrammetry works. The advantage of GPS/INS integration is interdependence. Even if GPS signal was blocked in some time, the position accuracy is not affected. In this study, various GPS signal time gap was used in GPS/INS AT process. Field surveyed ground points were used in accuracy check with GPS/INS AT check points. And the result showed enough accuracy of photogrammetry work rule of NGII. y.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.347-353
• /
• 2003

Lately, Digital Photogrammetry has been increasingly applied to various hightech industries and becomes one of more interesting focuses of study than ever. Thus, this study aims to develop a Road Horizontal Alignment Information System by means of digital photogrammetry. Data acquired from digital photographic techniques were processed using Delphi, an object oriented programming language to develop a computer aided program, that allows us to build the information on Road Horizontal Alignment(Beginning Point of Curve, Ending Point of Curve, Radius, Intersection Point). The developed program could maximize visualization for better analysis compared with traditional programs because it utilizes many image data. Comparing with data from traditional horizontal alignment extraction programs based on the principle of least square method, the data acquired by Horizontal Alignment Information and kinematic GPS showed out of the developed road information systems the improved accuracy of IP value up to about 2m in the direction of X, Y axes, where the accuracy of curve radius(R) becomes enhanced up to about 2.5 m.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.1
• /
• pp.77-84
• /
• 2020

This study is apply 3D spatial information per traditional landscape space by comparing spatial information data created using a small drone and 3D scanner used for 3D spatial information construction for efficient preservation and management of traditional landscaping space composed of areas such as scenic sites and traditional landscape architectures. The analysis results are as follows. First, aerial photogrammetry data is less accurate than 3D scanners, but it was confirmed to be more suitable for monitoring landscape changes by reading RGB images than 3D scanners by texture mapping using digital data in constructing orthographic image data. Second, the orthographic image data constructed by aerial photogrammetry in a traditional landscaping space consisting of a fixed area, such as Gwanghalluwon Garden, produced visually accurate and precise results. However, as a result of the data extraction, data for trees, which is one of the elements that make up the traditional landscaping, was not extracted, so it was determined that 3D scanning and aerial surveying had to be performed in parallel, especially in areas where trees were densely populated. Third, The surrounding trees in Soswaewon Garden caused many errors in 3D spatial information data including topographic data. It was analyzed that it is preferable to use 3D scanning technology for precise measurement rather than aerial photogrammetry because buildings, landscaping facilities and trees are dense in a relatively small space. When 3D spatial information construction data for a traditional landscaping space composed of area using a small drone and a 3D scanner free from temporal and spatial constraints and compared the data was compared, the aerial photogrammetry is effective for large site such as Hahoe Village, Gyeongju and construction of a 3D space using a 3D scanner is effective for traditional garden such as Soswaewon Garden.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.181-191
• /
• 2004

Nowadays, GPS-photogrammetry can be applied to the basemap production, a land register and NGIS. And from now on, as the increase of GPS receiver rate, the study on the interpolation methods considering the exact movement of an aircraft at photoflight and the study on the supplement of GPS defect by INS are required continuously. GPS-Photogrammetry, which are based on the direct measurement of the projection centers and attitude at the moment of camera exposure time through loading the GPS receiver in aircraft. This photogrammetric methods can of for us to acquire the exterior orientation parameters with only minimum ground control points, even the ground control process could be completely skipped. Consequently, we can drastically reduce the time and cost far the mapping process. In this thesis, two test flights were conducted in area to evaluate the performance of accuracy and efficiency through the analysis of results between the two photogrammetric methods, that is, traditional photograrammetry, GPS-Photogrammetry. Test results shows that a large variety of advantages of GPS-Photogrammetry against traditional photogrammetry is to be verified. Especially, the number of ground control points for the exterior orientation could be saved more than 70～80%, and the cost far map production 30～50%, respectively. In addition, it was convinced that the large reduction of control points has not any effect on the block accuracy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.89-95
• /
• 1996

As an attempt to apply GPS technique to aerial photogrammetry, an effort is exerted to replace the ground control points that were necessary in the traditional aerial photogrammetry with the aerial control by measuring the position of the camera exposure. In this study, various situations are simulated to test the conditions that affect the positioning of the points in aerial photogrammetry for the use of GPS data. From the result of the simulations, the necessary conditions and the applicable values to produce a 1:1, 000 topographical map were suggested. In the case of a photo block consists of 104 photos, we found a minimum of six ground control points make acceptable accuracy under the condition of below $10\mu{m}$ image positional error and with the ground observations.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.4_2
• /
• pp.453-465
• /
• 2021

Recently, photogrammetry, TLS(Terrestrial Laser Scanner), MMS(Mobile Mapping System)-based techniques have been applied to estimate earthwork volume for construction management. The primary objective of this study is to analyze the accuracy of earthwork volume estimating between photogrammetry and TLS, MMS that improves the traditional surveying method in convenience, estimating accuracy. For this, the following research works are conducted sequentially; 1) literature review, 2) core algorithm analysis, 3) surveying data acquisition using photogrammetry, TLS, MMS, 4) estimated earthwork volume comparison according to surveying method. As a result of the experiment, it was analyzed that there were earthwork volume errors of 1,207.5m³ (14.03%) of UAV-based digital map, 391.5m³(4.55%) of UAV, TLS integrated digital map, and 294.9m³(3.43%) of UAV, MMS integrated digital map. It is expected that the result of this study will be enormous due to the availability of the analyzed data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2017

An UAV (Unmanned Aerial Vehicle) is a flight system that is designed to conduct missions without a pilot. Compared to traditional airborne-based photogrammetry, UAV-based photogrammetry is inexpensive and can obtain high-spatial resolution data quickly. In this study, we aimed to classify the land cover using high-spatial resolution images obtained using a UAV. An RGB camera was used to obtain high-spatial resolution orthoimage. For accurate classification, multispectral image about same areas were obtained using a multispectral sensor. A DSM (Digital Surface Model) and a modified NDVI (Normalized Difference Vegetation Index) were generated using images obtained using the RGB camera and multispectral sensor. Pixel-based classification was performed for twelve classes by using the RF (Random Forest) method. The classification accuracy was evaluated based on the error matrix, and it was confirmed that the proposed method effectively classified the area compared to supervised classification using only the RGB image.