• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.78-85
• /
• 2008

Piezoelectric materials have been investigated as vibration energy converters to power wireless devices or MEMS devices due to the recent low power requirements of such devices and the advancement in miniaturization technology. Piezoelectric power generation can be an alternative to the traditional power source-battery because of the presence of facile vibration sources in our environment and the potential elimination of the maintenance required for large volume batteries. This paper represents the new power source which supplies energy device node. This system, called "energy harvesting system", with piezo materials scavenges extra energy such as vibration and acceleration from the environment. Then it converts the mechanical energy scavenged to electrical energy for powering device This paper explains the properties of piezo material through theoretical analysis and experiments The developed system provides a solution to overcome the critical problem of making up wireless device networks.

• Interdisciplinary Bio Central
• /
• v.5 no.4
• /
• pp.8.1-8.3
• /
• 2013

Unlike the traditional view, it is not mysterious about how G. Mendel chose the seven characters of the pea, Pisum sativum, that he studied. He first chose the pea that met three conditions he set up and repeated experiments for two years. Apparently, he knew that those characters were controlled by countable elements. Then, he derived the prediction on the basis of his idea about the elements, and selected the seven characters that satisfied the prediction. He knew "no prediction no science". In population genetics the Hardy-Weinberg principle is well known and cited in many papers and books. However, Mendel already derived the same principle in his paper, because he was acquainted also with physics and mathematics. Actually, the principle was trivial when they derived, but not at all when Mendel did. It is also well known that Mendel's laws were forgotten and rediscovered at the term of the 19th century. That may not be true either. His laws were internationally well known before the rediscovery. In fact, the 1881-year version of the Encyclopedia Britannica contains his laws.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2297-2306
• /
• 2015

This paper presents the development of a system with a reverse matrix converter (RMC) for permanent magnet synchronous motor (PMSM) drive and its effective control method. The voltage transfer ratio of the general matrix converter is restricted to a maximum value of 0.866, which is not suitable for applications whose source voltages are lower than the load voltages. The proposed RMC topology can step up the voltage without any additional components in the conventional circuit. Its control method is different from traditional matrix converter’s one, thus this paper proposes control schemes of RMC by means of controlling both the generator and motor side currents with properly designed control loop. The converter can have sinusoidal input/output current waveforms in steady state condition as well as a boosted voltage. In this paper, a hardware system with an RMC for a PMSM drive system is described. The performance of the system was investigated through experiments

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2354-2363
• /
• 2018

This paper proposed a novel double closed control strategy for single-phase voltage source pulse width modulation (PWM) rectifier based on active disturbance rejection control (ADRC) and dq current decoupling control. First, the mathematical model of the single-phase PWM rectifier in the d-q axis synchronous rotating reference frame is established by constructing a virtual component using a second-order generalized integrator (SOGI). Then, the mathematical model is simplified according to the active power conservation, and the first-order equation of single-phase PWM rectifier voltage outer loop is acquired. A linear auto-disturbance rejection controller is used to design the voltage outer loop according to the first-order equation. Finally, the proposed control strategy and the traditional PI control are compared and verified by simulation and physical experiments. Both simulation and experimental results confirm that the proposed control strategy has excellent dynamic performance and strong rejection ability to disturbances.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.3
• /
• pp.27-37
• /
• 1999

In just-in-time production systems, U-shaped production lines rather than traditional straight lines are often adopted since they have some advantages. The advantages of U-lines over straight lines are that the workstations required can be reduced and the necessary number of workers can be easily adjusted when the demand rates are changed. In this paper, we present a new heuristic based on genetic algorithm to improve the workload smoothness in the U-line. In the proposed algorithm, a new genetic representation is developed which is specific to the problem being solved. To enhance the capability of searching good solutions, genetic operators are designed by using the problem-specific information and heuristics. Extensive experiments are carried out on well-known test-bed problems in the literature to verify the performance of our algorithm. The computational results show that our algorithm is a promising alternative to existing heuristics.

• Management Science and Financial Engineering
• /
• v.16 no.3
• /
• pp.21-47
• /
• 2010

Quantity discounts provide a practical foundation for supply chain inventory policies, improving the supplier's profit and reducing the buyer's inventory cost simultaneously. Traditional quantity-discount research, which deals with inventory coordination between a buyer and a supplier, is extended to a stationary stochastic environment. This research shows that the magnitude of the optimal discounts scheduled by the deterministic quantity discount models may not be large enough to cover the buyer's additional inventory stocking risks under uncertain conditions. As a result, the buyer's total inventory cost may often increase rather than decrease. In contrast, the proposed model allows the supplier to identify the discount level, which shares the buyer's amplified risk associated with temporary overstocking and ensures that both buyer and supplier benefit economically. The performance of the proposed model was tested in the continuous review environments via numerical experiments. The experimental results support the proposed method as a feasible alternative in coordinating inventory decisions under stochastic demand.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.632-638
• /
• 2009

Probabilistic Latent Semantic Analysis has many applications in information retrieval and filtering, natural language processing, machine learning from text, and in related areas. In this paper, we propose an algorithm using weighted Probabilistic Latent Semantic Analysis Model to find the contextual phrases and opinions from documents. The traditional keyword search is unable to find the semantic relations of phrases, Overcoming these obstacles requires the development of techniques for automatically classifying semantic relations of phrases. Through experiments, we show that the proposed algorithm works well to discover semantic relations of phrases and presents the semantic relations of phrases to the vector-space model. The proposed algorithm is able to perform a variety of analyses, including such as document classification, online reputation, and collaborative recommendation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.777-783
• /
• 2007

In this paper, we present a novel control approach for linear motor-based transfer systems in which friction reduction and enhancement of control performance are considered. In general, in such systems friction effects from rails and wheels, and internal bearings complicate control scheme since in particularly its dynamics are arbitrarily changed due to mass variation, detent force of motor systems, and gaps among stators. Our control approach is achieved to reduce this undesired friction dynamics using fuzzy system. We construct hybrid control approach for this control system which Is composed of a nominal control and a vertical control against friction. Fuzzy parameter vector is optimally determined from iterative simulation experiments. We demonstrate its superiority via numerical simulations comparing with a traditional control method.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.422-429
• /
• 2008

This paper presents compact low frequency ultra-wide band (UWB) sensor design and study of the partial discharge diagnosis by sensing electromagnetic pulse emitted from the partial discharge source with the newly designed UWB sensor. In this study, we designed a new type of compact low frequency UWB sensor based on microstrip antenna technology to detect both the low frequency and high frequency band of the partial discharge signal. Experiments of offline PD testing on medium voltage (22.9kV) underground cable mention the comparative results with the traditional HFCT as a reference sensor in the laboratory. In the series of comparative tests, the calibration signal injection test provided with the conventional IEC 60270 method and high voltage injection testing are included.

• IE interfaces
• /
• v.6 no.1
• /
• pp.55-65
• /
• 1993

A nonstandard instrument used in the filed frequently becomes out-of-calibration due to environmental noise, misuse, aging, etc. A substantial amount of loss may result if such nonstandard instrument is used to check product quality and performance. Traditional periodic calibration at the calibration center is not capable of detecting out-of-calibration status while the instrument is in use, and therefore, statistical methods need to be developed to check the status of a nonstandard instrument in the field between calibrations. Developed in this paper is a unified measurement assurance model in which statistical calibration at the calibration center and measurement assurance test in the filed are combined. We developed statistical procedures to detect changes in precision and in the coefficients of the calibration equation. Futher, computational experiments are conducted to evaluate how the power of test varies with respect to the parameters involved. Based upon the computational results we suggest procedures for designing effective measurement assurance tests.