• 농업과학연구
• /
• 제49권4호
• /
• pp.677-696
• /
• 2022

Development of radish collectors may enhance radish production and promote upland crop mechanization in the Republic of Korea. Theoretical analysis of power is crucial to ensure the optimum design of agricultural machinery. The aim of the present study is to analyze theoretically the power requirement of a tractor-mounted radish collector under development and to propose design guidelines. The important components of the radish collector were belt-type conveyors, three hydraulic motors, and a direct current (DC) winch motor to operate the total radish collecting process. Theoretical equations were used to calculate the hydraulic motor's power, winch motor power, and draft power at loaded and unloaded conditions. A variety of tractors (44 - 74 kW) and different soil characteristics (hard, firm, tilted, and sandy) were considered to investigate the appropriate drawbar power. Variations of the power requirement of the tractor-mounted radish collector were observed due to modifications of the design parameters. The required hydraulic power of the stem cutting conveyor, stem cutting blade, and transfer conveyor of the radish collector were 0.23 and 0.24, 0.18 and 0.19, and 0.19 and 0.22 kW under unloaded and loaded conditions, respectively. The maximum draft power was calculated as 0.89, 1.07, 1.25, and 1.61 kW at a 30° tilted angle for hard, firm, tilted, and sandy soil, respectively. The calculation showed 2.07 kW DC power was required for unfolding or folding the stem-cutting conveyor. A maximum power of 4.78 kW was prescribed for conducting the whole process of the tractor-mounted radish collector. The analysis of power introduced in this study will be helpful to select the appropriate design parameters for the successful development of a tractor-mounted radish collector.

• 농업과학연구
• /
• 제50권3호
• /
• pp.383-394
• /
• 2023

In Korea, the U.S. Tier-4 Final emission standards have been applied to agricultural machinery since 2015. This study was conducted to analyze the emission characteristics of agricultural tractors during plow tillage operations using PEMS (portable emissions measurement systems). The tractor working speed was set as M2 (5.95 km/h) and M3 (7.60 km/h), which was the most used gear stage during plow tillage operation. An engine idling test was conducted before the plow tillage operation was conducted because the level of emissions differed depending on the temperature of the engine (cold and hot states). The estimated level of emissions for the regular area (660 m²), which was the typical area of cultivation, was based on an implement width of 2.15 m and distance from the work area of 2.2 m. As a result, average emission of CO (carbon monoxide), THC (total hydrocarbons), NOx (nitric oxides), and PM (particulate matter) were approximately 6.17×10-2, 3.36×10^-4, 2.01×10^-4, and 6.85×10^-6 g/s, respectively. Based on the regular area, the total emission of CO, THC, NOx, and PM was 2.62, 3.76×10^-2, 1.63, and 2.59×10^-4 g, respectively. The results of total emission during plow tillage were compared to Tier 4 emission regulation limits. Tier 4 emission regulation limits means maximum value of the emission per consumption power (g/kWh), calculated as ratio of the emission and consumption power. Therefore, the total emission was converted to the emission per power using the rated power of the tractor. The emission per power was found to be satisfied below Tier 4 emission regulation limits for each emission gas. It is necessary to measure data by applying various test modes in the future and utilize them to calculate emission because the emission depends on various variables such as measurement environment and test mode.

• Tuberculosis and Respiratory Diseases
• /
• 제43권4호
• /
• pp.547-557
• /
• 1996

연구배경 : 호중구는 성인형 호흡곤란증후군, 폐기종 및 원발성 폐섬유화증 등 여러 폐질환에서 과도하게 폐에 침착되어 여러 가지 독설 물질을 분비하여 조직 손상을 일으키는 것으로 알려져 있어, 말초혈액 호중구가 폐포나 간질조직으로 이동하는 기전을 이해하는 것은 매우 중요하다. 저자들은 급성 폐손상의 동물실험모델로 흰쥐에 고농도 산소를 추여하여 급성 폐손상을 일으킨 후 기관지폐포세척액내 호중구 및 호중구에 대한 화학주성능이 증가하였는지 그리고 이러한 변화가 고농도산소 노출 시간에 따라 차이가 있는지를 관찰하였으며, 또한 호중구 화학주성인자의 분자량 및 물리적 특성을 알아보았다. 방법 : 고농도산소를 투여할수 있는 기구(hyperoxic chamber)를 만들어 95%이상의 산소를 흰쥐에 24, 48, 60, 72시간 투여하였으며 각군의 쥐에서 기관지폐포세척을 실시하여 얻은 세척액내 호중구의 증가여부를 관찰하였고 호중구의 화학주성능은 정상인의 말초혈액내 호중구를 대상으로 Neuroprobe 48 well chemotactic chamber를 이용하여 계산하였다. 또한 기관지 폐포세척액을 열처리하거나 cellulose membrane에 filter 시켰을 때 화학주성능의 변화여부를 관찰하였고 FPLC(Fast performance liquid chromatography)로 분자량을 측정하였다. 결과 : 1) 기관지폐포세척액내 호중구는 대조군에 비해 고농도 산소 노출 48시간에서부터 증가하여 노출 시간이 길수록 유의하게 증가하였다. 2) 기관지폐포세척액의 호중구 화학주성능 (chemotactic index)도 대조군에 비해 고농도 산소 노출 48시간에부터 유의하게 증가하기 시작하여 노출 시간이 길수록 유의하게 증가되었다. 3) 흰쥐는 48시간까지는 한마리도 사망하지 않았으나 60시간에 33.3 %, 72시간에 81.3 %의 사망률로 현저히 증가하였다. 4) FPLC를 이용하여 호중구 화학주성인자를 분석하였을 때 chemotactic index는 분자량이 104,000과 12,000 dalton에서 peak를 나타냈다. 5) 48시간과 60시간 및 72시간 노출군에서 기관지폐포세척액을 $56^{\circ}C$에서 30분과 $100^{\circ}C$에서 10된 열처리 후 chemotactic index는 열처리 전보다 모두 유의하게 감소하였으며, 48시간과 60시간 노출군에서 12,000 dalton 이하의 물질을 dialysis 후 chemotactic index도 dialysid 전에 비해 유의하게 감소하였다. 결론 : 이상의 결과로서 흰쥐에 고농도의 산소를 40시간 이상 노출시키면 기관지폐포세척액에 호중구 화학주성인자가 증가되고 그에 따라 호중구가 폐에 증가하여 급성 폐손상을 일으키고, 이때 나타나는 호중구 화학주성인자는 분자량이 작은 것 뿐 아니라 큰 것까지 다양하며, 열에 대해 약한 것 뿐 아니라 강한 성분 등 여러가지가 있음을 관찰하였으며 앞으로 이들 성분에 대한 연구가 더욱 진행되어야 할 것으로 생각된다.

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• 한국지역지리학회지
• /
• 제2권1호
• /
• pp.51-67
• /
• 1996

이 연구는 캘리포니아주(州) 벼농사를 종합적으로 고찰하는 연구이다. 미국에서 생산되는 벼의 약 23%는 캘리포니아 중앙분지에서 생산된다. 캘리포니아 중앙분지는 새크라멘토분지, 산호아퀸분지, 델타지역의 세 지역으로 구분되는데, 새크라멘토분지는 벼 재배에는 매우 이상적인 자연조건을 갖추고 있다. 오늘날 새크라멘토분지에서 캘리포니아주(州) 벼의 약 95%가 생산된다. 캘리포니아주(州)에서 벼가 상업적으로 재배되기 시작한 것은 1912년이었다. 캘리포니아주(州)에서 벼농사는 처음부터 관개농업에 의존하였다. 논에 물을 댄 상태에서 벼가 자라야지 잡초가 무성해지지 않고, 벼 수확량도 많아진다. 캘리포니아주(州) 벼농사에 사용되는 관개용수의 90% 이상은 지표수에서 끌어들인 것이고, 나머지는 지하수를 퍼 올린 것이다. 캘리포니아주(州) 벼농사는 고도로 기계화되어 있다. 트랙터, 레이저 평탄기, 콤바인, 건조기, 비행기 등이 벼농사에 이용되고 있다. 이와 같은 기계화 덕택으로 캘리포니아주(州) 벼농사에서 1 에이커당 노동투하량은 4시간 정도에 지나지 않는다. 캘리포니아주(州)에서는 일찍부터 벼농사에 관한 연구가 본격적으로 시작되었다. 벼농사 연구에서 가장 중요한 것은 품종개량이었다. 특히 캘리포니아주(州)에서는 지난 수십년 동안 품종계량에서 괄목할 만한 성공을 거두었다. 그 결과 중립벼와 단립벼 품종이 매우 다양해졌다. 대체적으로 볼 때, 벼 줄기는 작지만 이삭은 많이 열리는 벼 품종들이 많이 개발되었다. 그 외 관개기술, 기계화 등 벼농사와 관련된 제반 사항이 체계적으로 연구되었다. 캘리포니아주(州)는 벼를 재배하는 미국의 6개 주(州) 가운데 단위면적당 벼 생산성이 가장 높은 주(州)이다. 오늘날 캘리포니아주(州)가 단위면적당 벼 생산성에서 미국 뿐만 아니라 세계의 선두에 서 있는 것은 유리한 자연환경과 더불어 과학적인 연구에 힘입은 바가 크다.