• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.303-312
• /
• 2023

The determination of the oxidation states of metal elements in manganese nodules sheds light on the understanding of the formation mechanism of nodules, providing insights into the paleo-environmental conditions such as the redox potential of the aqueous system. This study aims to reveal the oxidation states and chemical bonding of manganese in the natural polymetallic nodules, utilizing conventional X-ray photoelectron spectroscopy (XPS). Specifically, shallow manganese nodules from the Siberian Arctic Sea, effectively recording mineralogical variations, were used in this study. Detailed analysis of XPS Mn 2p spectra showed changes in the manganese oxidation state from the center to the outer parts of the nodules. The central part of the nodules showed a higher Mn⁴⁺ content, approximately 67.9%, while the outermost part showed about 63% of Mn⁴⁺ due to an increase in the Mn³⁺+Mn²⁺. The decrease in the Mn oxidation state with the growth is consistent with the previously reported mineralogical variations from todorokite to birnessite with growth. Additionally, the O 1s spectra presented a predominance of Mn-O-H bonds in the outer layers compared to the center, suggesting hydration by water in the layered manganates of outer layers. The results of this study demonstrate that XPS can be directly applied to understand changes in paleo-environmental conditions such as the redox states during the growth of manganese nodules. Finally, future studies using high-resolution synchrotron-based XPS experiments could achieve details in oxidation states of manganese and trace metal elements.

• Clinical and Experimental Pediatrics
• /
• v.48 no.4
• /
• pp.406-410
• /
• 2005

Purpose : Anticonvulsants have a number of side effects and some of them may be attributed to a disturbance of serum trace metal homeostasis. Although they are minor building components in tissues, they play important functional roles in the peripheral and central nervous system. We measured serum copper and zinc levels in epileptic children who were treated with anticonvulsants to know the effects of anticonvulsants on serum copper and zinc levels. Methods : Serum copper and zinc levels were determined in 64 epileptic patients receiving anticonvulsant therapy in Chungnam National University Hospital, and in 20 normal controls. Sixty-four epileptic patients were divided into three groups : 16 patients who were treated with valproic acid monotherapy; 26 patients who were treated with valproic acid in addition to other anticonvulsants; and 22 patients who were treated with anticonvulsants except for valporic acid. Results : All patients receiving anticonvulsants had significantly lower serum copper levels($80.21{\pm}19.42{\mu}g/dL$) in comparison to the normal controls($102.12{\pm}32.8{\mu}g/dL$). Serum zinc levels in patients receiving anticonvulsants($79.78{\pm}21.88{\mu}g/dL$) were not statistically different from those of controls ($85.26{\pm}29.81{\mu}g/dL$). There were no significant difference of serum copper and zinc levels among the three groups. Conclusion : In this study, we clearly showed that anticonvulsants decreased serum copper levels. Although we did not observe any clinical findings related to copper deficiency, we should pay attention to potent copper deficiency in patients with anticonvulsant treatment.

• Analytical Science and Technology
• /
• v.29 no.3
• /
• pp.114-125
• /
• 2016

In this study, 165 wastewater discharge facilities in 10 business types were investigated with regard to 24 specific hazardous substances that included heavy metals, VOCs, CN, and phenol in the Gwangju city. Cu in the range from from 0.008 to 35.420 mg/L was detected in all business types and the detection rate was 46.8 %. Other heavy metals, such as Cd, As, Hg, Pb, and Cr⁺⁶ were detected as well. However, their detection rates ranged between 0.6 and 1.8 %. CN and phenol were detected in one and five facilities, respectively. 12 species of VOCs were detected: chloroform 80.6 % (0.42 to 81.60 μg/L), benzene 16.4 % (1.49 to 3.31 μg/L), trichloroethylene 11.5 % (1.78 to 6.02 μg/L), 1,1-dichloroethylene 10.3 % (1.23 to 5.89 μg/L), and dichloromethane 8.5 % (0.28 to 968.86 μg/L) in the detection rate order. The concentration of VOCs was detected in trace amounts, except for dichloromethane that exceeded the effluent quality standard in three business types, namely, metal manufacturing, food industry, and car washing facility. Chloroform was detected in all business types, where 24.88 μg/L were detected in the laundry business and 53.41 μg/L in the water supply business; the mean concentration of chloroform in these two business types was higher than elsewhere. Therefore, for the disposal of non-degradable specific hazardous substances in industrial wastewater, it is necessary to introduce physical and chemical processes, such as activated carbon adsorption, fenton oxidation, ozone treatment, as well as photocatalyst and the UV radiation.

• The Korean Journal of Mycology
• /
• v.2 no.1
• /
• pp.1-6
• /
• 1974

1. The mycelial growth and sporulation of Mycogone perniciosa was compared on modified Czapek's media deficient in carbon source, nitrogen source, K,Mg, P or the heavy metal elements. The mycelial growth was significantly reduced in solution cultures lacking Mg, K or P and only a trace of growth occurred in solutions lacking carbon source or nitrogen source. Most sparse sporulation and smaller chlamydospores than on any of deficient agar media occurred on agar media dificient in carbon source or nitrogen source. 2. In both potato dextrose agar and malt extract solution, growth of the fungus was optimum at $25^{\circ}C$, and undetectable at $10^{\circ}C$ and $35^{\circ}C$. 3. Optimum pH for growth of this fungus was 7.0. 4. This fungus was killed in soil when exposed to $50^{\circ}C$ or higher for 20 minutes or more.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.39-53
• /
• 2001

Environmental pollution of the Tohyun mine creek area was investigated on the basis of geology, mineralogy and geochemistry. In soils and sediments of the mine area, ${Al_2}{O_3}/{Na_2O}$ and ${K_2}O/{Na_2}O$ ratios are partly negative correlation against ${SiO_2}/{Al_2}{O_3}$, respectively. Geochemical characteristics of some trace and rare earth elements such as V/Ni, Ni/Co, La/Ce, Th/Yb, Th/U, La/Th, ${La_N}/{Yb_N}$, La/Sc and Sc/Th are revealed a narrow range and homogeneous compositions may be explained by simple source lithology. These results suggest that sediments source of the host shale around the mine area could be originated by basic to intermediate igneous rocks. Mineral compositions of soil and sediment near the mine area were partly variable mineralogy, which are composed of quartz, mica, feldspar, chlorite, clay minerals and some pyrite. Soils and sediments with highly concentrated heavy minerals, gravity separated mineralogy, are composed of some pyrite, arsenopyrite, chalcopyrite, sphalerite, galena, goethite and various kinds of hydroxide minerals on the polished sections. As normalized by bed rock composition, average enrichment indices of major elements in sediments, precipitates, farmland soils and paddy soils are 1.0, 1.7, 0.9 and 0.8, respectively. Maximum concentration of environmental toxic elements in the mine creek are detected with Ag = 186 ppm, As = 17,100 ppm, Bi = ]27 ppm, Cd = 77 ppm, Cu = 12,299 ppm, Pb = 8,897 ppm, Sb = 1,350 ppm, W = 599 ppm and Zn = 12,250 ppm, which are increasing with total FeO increasing, and extremely high concentrations of surface sediments and precipitates near the waste rock dump. These toxic elements (As, Bi, Cd, Cu, Pb, Sb, W and Zn) of the samples, normalizing by host rock concentration, revealed that average enrichment index is 106.0 for sediments, 279.6 for precipitates, 3.5 for farmland soils and 1.6 for paddy soils. However, on the basis of EPA values, enrichment indices of all the samples are 40.7, 121.4, 1.3 and 0.6, respectively.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.395-401
• /
• 2010

This research was carried out as a survey on the contents of Lead (Pb) and Cadmium (Cd) in 5 type agricultural products unestablished safety guideline in Korea. The average levels of Pb: onion 0.010 mg/kg, cucumber 0.018 mg/kg, garlic 0.012 mg/kg, green pepper 0.027 mg/kg, sesame 0.029 mg/kg. The average levels of Cd: onion 0.006 mg/kg, cucumber 0.002 mg/kg, garlic 0.008 mg/kg, green pepper 0.011 mg/kg, sesame 0.024 mg/kg. The present result of this study showed that Pb and Cd contents in the whole samples were less than the maximum residual levels of the codex standard. The levels of exposure assessment for Pb and Cd by intake from vegetables and sesame were merely at $1.3{\times}10^{-4}$(mean) ~ $5.1{\times}10^{-4}$($95^{th}$ percentiles) ${\mu}$g/kg bw/day for Pb, $7.5{\times}10^{-5}$(mean) ~ $3.6{\times}10^{-4}$($95^{th}$ percentiles) ${\mu$}g/kg bw/day for Cd. The data from this research will be valuable source for database construction for science-based safety control and management for the trace metal contamination in food including agricultural products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.4
• /
• pp.539-549
• /
• 2012

In order to acquire basic data on the development of squid processing food, we investigated changes in the composition of boiled squid upon heat treatment ($100^{\circ}C$), acid treatment (acetic acid, 0~5%), and pre-boiling ($55^{\circ}C$, $80^{\circ}C$). The proximate composition of squid was 73~78% moisture and 19~24% crude protein, treatment with acid solution had a significant effect on the proximate composition of boiled squid (p<0.05). The major free sugars were ribose and glucose in all treatment samples. The $55^{\circ}C$ pre-boiled sample had lower levels of glucose than the other samples. The total free sugar content of the non-peeled sample was the highest, followed by the $80^{\circ}C$ pre-boiled sample, whereas the sugar content in the $55^{\circ}C$ pre-boiled sample was very low. With regards to amino acid content, proline was the highest in all samples, followed by taurine and histidine. Treatment with acid solution had a significant effect on the total free amino content of boiled squid (p<0.05). The total free amino acid content of the $55^{\circ}C$ pre-boiled sample was the highest, followed by the $80^{\circ}C$ pre-boiled sample and non-peeled sample. Inosine and related compounds were not detected in any of the samples, and the adenosine triphosphate (ATP) content was low. The hypoxanthine contents of the $55^{\circ}C$ and $80^{\circ}C$ pre-boiled samples were the highest, the adenosine monophosphate (AMP) and inosine monophosphate (IMP) contents were similar, and the IMP content of the non-peeled sample was higher than those of the peeled samples. The palmitic acid content was very high and constituted 40% of total saturated fatty acids. eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) contents were also high and constituted 60% of total unsaturated fatty acids. Of these, DHA content was the highest, followed by palmitic acid and EPA, which accounted for about 85% of total fatty acids. No difference in fatty acid content was observed between acid treatment and pre-boiling. The mineral P content was the highest on average in all boiled squid samples, followed by K, Na, Mg, and Ca contents. In addition, the pre-boiling temperature and acid solution concentration had significant effects on the mineral content. Further, heavy metal, Cd, Pb, and As contents were detected only at trace amounts, and their levels were lower than standard and permissible amounts for food.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1306-1313
• /
• 2011

A liquid fertilizer treated with slurry composting and biofiltration (SCB) process has been applied increasingly on agricultural field but the effects on the soil properties and crop production has not been throughly evaluated. This study was conducted to investigate the effect of the SCB application on soil chemical properties and the growth of radish and corn. SCB liquid fertilizer as a basal fertilization was treated with five levels based on $6kg\;10a^{-1}$ for radish and $10kg\;10a^{-1}$ for corn. The experimental design was the completely randomized block design with five levels and three replicates. Electrical conductivity (EC), $NO_3$-N, Exch. K and Exch. Na increased depending on the treatment levels of SCB. There were no changes in soil organic matter, Avail. $P_2O_5$, Exch. Ca and Exch. Mg. EC, $NO_3$-N and Exch. Na content decreased as precipitation increased. Especially, they decreased up to the initial condition before the treatment after the heavy rainy season in 2008. Although Exch. K decreased at the rainy season, they remained relatively higher content after the experiment on August, 2008. Fresh weight and the amount of N uptake of radish increased due to the levels of SCB, but corn did not present any significant increase. It is recommended that we need to decide the proper amount of SCB as well as the application method on the field to increase the productivity and decrease environmental stress. Additional experiments also need to clarify the effect of the trace element and heavy metal accumulations due to long term application of SCB.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.175-182
• /
• 2022

Heavy metals can be intentionally or unintentionally introduced into plastic food utensils, containers, and packaging (PFUCP) as additives or contaminants, which can be ingested with food by humans. Here, seven-heavy metals (lead, cadmium, nickel, chromium, antimony, copper, and manganese) with toxicity concerns were selected, and risk assessment was done by establishing their migration from 137 PFUCP products made of 16 materials distributed in Korea. Migration of heavy metals was examined by applying 4% acetic acid as a food simulant (70℃, 30 minutes) to the PFUCP products. Inductively coupled plasma mass spectrometry (ICP-MS) was employed for the analysis of migrated heavy metals, and the reliability of quantitative results was confirmed by checking linearity, LOD, LOQ, recovery, precision, and expanded uncertainty. As a result of monitoring, heavy metals were detected at a level of non-detection to 8.76 ± 11.87 ㎍/L and most of the heavy metals investigated were only detected at trace amounts of less than 1 ㎍/L on average. However, antimony migrated from PET products was significantly higher than other groups. Risk assessment revealed that all the heavy metals investigated were safe with a margin of exposure above 311. Collectively, we demonstrated that heavy metals migrated from PFUCP products distributed in Korea appear to be within the safe range.

• Composites Research
• /
• v.35 no.4
• /
• pp.248-254
• /
• 2022

In this study, TiB₂-steel composite with high-fractional TiB₂ reinforcement was fabricated by gas pressure infiltration process and the microstructure analysis and compressive strength and hardness were evaluated. To elucidate the correlation between microstructure and mechanical properties for fabricated composite, after the compression test of TiB₂-steel composite, the fracture surface was analyzed and the fracture behavior on compression test was predicted. As a result of the compression fracture surface analysis, interfacial failure trace between the steel matrix and the reinforcement was observed, and the interface between the steel matrix and the reinforcement was analyzed using TEM. From the result of microstructure analysis on the fabricated composite, it was confirmed that, in addition to TiB₂ reinforcement and steel matrix, TiC phase and coarse (Fe,M)₂B (M=Cr,Mn) phase were formed. Throughout the thermodynamic calculation, it was confirmed that TiC and (Fe,M)₂B can be formed as a stable phase under the process condition. The fabricated TiB₂-steel composite had a significantly increased hardness, and the compressive strength and Young's modulus were improved by 3.07 times and 1.95 times, respectively, compared to steel matrix. It seems that the coarse (Fe,M)₂B (M=Cr,Mn) phase formed throughout the composite causes the deterioration of mechanical properties, and by controlling the formation of the (Fe,M)₂B (M=Cr,Mn) phase, it is judged that the mechanical properties of the TiB₂-steel composite can be further improved.