• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2023년도 춘계학술대회
• /
• pp.105-105
• /
• 2023

Heavy metals, including lead (Pb) toxicity, are increasing in soil and are considered toxic in small amounts. Pb contamination is mainly caused by industrialization - smelting, mining. Agricultural practices - sewage sludge, pests and urban practices - lead paint. It can seriously damage and threaten crop growth. Pb can adversely affect plant growth and development by affecting the photosystem, cell membrane integrity, and excessive production of reactive oxygen species (ROS) such as hydrogen peroxide (H₂O₂)andsuperoxide(O₂.-). NO is produced via enzymatic and non-enzymatic antioxidants to scavenge ROS and lipid peroxidation substrates in terms of protecting cells from oxidative damage. Thus, NO improves ion homeostasis and confers resistance to metal stress. Our results here suggest that exogenous NO may aid in better growth under lead stress. These enhancements may be aided by NO's ability in sensing, signaling and stress tolerance in plants under heavy metal stress in combination with lead stress. Our results show that GSNO has a positive effect on soybean seedling growth in response to axillary pressure and that NO supplementation helps to reduce chlorophyll maturation and relative water content in leaves and roots following strong burst under lead stress. GSNO supplementation (200 µM and 100 µM) reduced compaction and approximated oxidative damage of MDA, proline and H₂O₂. Under plant tension, a distorted appearance was found in the relief of oxidative damage by ROS scavenging by GSNO application. In summary, modulation of these NO, PCS and prolongation of metal past reversing GSNO application confirms the detoxification of ROS induced by toxic metal rates in soybean. In summary, these NO, PCS and metal traditionally sustained rates of reverse GSNO application confirm the detoxification of ROS induced by toxic metal rates in soybean.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.588-593
• /
• 2011

미립담체에 고정된 Vero 세포를 이용한 돼지유행성설사병 바이러스 백신의 생산성을 향상시키기 위하여 Phillipsite-Gismondine synthetic zeolite가 투석막에 충진된 Carberry type 생물반응기를 사용하여 암모늄 이온을 선택적으로 흡착하였다. Impeller shaft 및 흡착제 사이에 응집된 미립담체 때문에 세포 성장이 감소하는 것으로 보이나, 포도당 소모량과 젖산 생성량의 비교를 통해 판단 할 때 zeolite는 세포에 독성을 나타내지 않았다. 배양배지로부터 암모늄 이온을 제거함으로써 세포성장 및 바이러스 생산 두 단계 모두가 크게 개선되었다. 바이러스 생산에 있어서는 암모늄 이온 제거에 의해 대조군과 비교하여 바이러스 역가가 2배 이상 향상되었다. 연구결과 zeolite는 암모늄 이온을 효과적으로 흡착제거하여 바이러스 백신의 생산성을 높일 수 있는 이상적인 흡착제임을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.969-976
• /
• 2004

Cassava peelings waste, which is both a waste and pollutant, was chemically modified using mercaptoacetic acid (MAA) and used to adsorb $Cu^{2+}\;and\;Cd^{2+}$ from aqueous solution over a wide range of reaction conditions at $30^{\circ}C$. Acid modification produced a larger surface area, which significantly enhanced the metal ion binding capacity of the biomass. An adsorption model based on the $Cu^{2+}/Cd^{2+}$ adsorption differences was developed to predict the competition of the two metal ions towards binding sites for a mixed metal ion system. The phytosorption process was examined in terms of Langmuir, Freundlich and Dubinin-Radushkevich models. The models indicate that the cassava waste biomass had a greater phytosorption capacity, higher affinity and greater sorption intensity for $Cu^{2+}\;than\;Cd^{2+}$. According to the evaluation using Langmuir equation, the monolayer binding capacity obtained was 127.3 mg/g $Cu^{2+}$ and 119.6 mg/g $Cd^{2+}$. The kinetic studies showed that the phytosorption rates could be described better by a pseudo-second order process and the rate coefficients was determined to be $2.04{\times}10^{-3}\;min^{-1}\;and\;1.98{\times}10^{-3}\;min^{-1}\;for\;Cu^{2+}\;and\;Cd^{2+}$ respectively. The results from these studies indicated that acid treated cassava waste biomass could be an efficient sorbent for the removal of toxic and valuable metals from industrial effluents.

• 대한소아치과학회지
• /
• 제25권4호
• /
• pp.843-848
• /
• 1998

Pulpotomy is a frequently used treatment modality in primary teeth. It is method by which infected coronal pulp is removed while retaining vital radicular pulp. Since its introduction in 1930 by Sweet formocresol remains the most popular medicament for this treatment. However, despite its outstanding bactericidal properties, formocresol is known to cause adverse tissue reactions. Theoretically, formocresol disinfects and fixes radicular pulp and thus prevents infection and internal resorption. In reality, however, it leads to chronic inflammation and is sometimes responsible for failures through abscess formation and internal root resorption. Also, Myers et al., in 1978, reported on the systemic distribution of FC and other studies have followed with reports of its immunological, mutagenic and carcinogenic effects. Much effort has, therefore, focused on the development of alternative medicaments and techniques. Since its introduction in 19C, ferric sulfate proven itself as an effective hemostatic agent and is used as an astringent in dentistry. In 1988, Landau and Johnsen suggested ferric sulfate be used as a medicament in pulpotomy and many studies have focused on it to overcome the toxic effects of FC. Ferric sulfate acts through its ferric ion and iron ion, which react with blood protein leading to aggregation. The aggregated protein acts to plug the blood vessels, causing mechanical hemostasis. As blood clot formation is minimal, there is reduced inflammation of radicular pulp and enhanced healing. There are no reports regarding its systemic distribution. This is a report of cases treated by the author using pulpotomy with ferric sulfate.

• 분석과학
• /
• 제8권4호
• /
• pp.611-615
• /
• 1995

The design of appropriate chemically modified electrodes should allow development of new voltammetric measurement schemes with enhanced selectivity and sensitivity. Microorganism like algae has high ability to trap toxic and heavy metal ions and different affinities for metal ions. A copper(II) ion-selective carbon paste electrode was constructed by incorporating alga Anabaena into a conventional carbon paste mixture, and then the film of 10% Nafion was coated to avoid the swelling of the electrode surface. Copper ion could be deposited at the 25% algamodified electrode for 15 min without the applied potential while stirring the solution by only immersing the electrode in a buffer (pH 4.0) cot1taining copper(II). Temperature was controlled at $35^{\circ}C$. After preconcentration was carried out the electrode was transferred to a 0.1 M potassium chloride solution and was reduced at -0.6 volt at $25^{\circ}C$. The differential pulse anodic stripping voltammetry was employed. A well-defined oxidation peak could be obtained at -0.1 volt (vs SCE). In five deposition / measurement / regeneration cycles, the responses were reproducible and relative standard deviations were 3.3% for $8.0{\times}10^{-4}M$ copper(II). Calibration curve for copper was linear over the range from $2.0{\times}10^{-4}M$ to $1.0{\times}10^{-3}M$. The detection limit was $7.5{\times}10^{-5}M$. Studies of the effect of diverse ions showed that the coexisting metal ions had little or no effect for the determination of copper. But anions such as cyanide. oxalate and EDTA seriously interfered.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.120-123
• /
• 2014

Thermal doping method using furnace is generally used for solar-cell wafer doping. It takes a lot of time and high cost and use toxic gas. Generally selective emitter doping using laser, but laser is very high equipment and induce the wafer's structure damage. In this study, we apply atmospheric pressure plasma for solar-cell wafer doping. We fabricated that the atmospheric pressure plasma jet injected Ar gas is inputted a low frequency (1 kHz ~ 100 kHz). We used shallow doping wafers existing PSG (Phosphorus Silicate Glass) on the shallow doping CZ P-type wafer (120 ohm/square). SIMS (Secondary Ion Mass Spectroscopy) are used for measuring wafer doping depth and concentration of phosphorus. We check that wafer's surface is not changed after plasma doping and atmospheric pressure doping width is broaden by increase of plasma treatment time and current.

• Environmental Engineering Research
• /
• 제17권4호
• /
• pp.185-190
• /
• 2012

Rejection characteristics of perchlorate ($ClO_4^-$) were examined for commercially available reverse osmosis (RO) and nanofiltration (NF) membranes. A bench-scale dead-end stirred-cell filtration system was employed to determine the toxic ion rejection and the membrane flux. Model water solutions were used to prepare $ClO_4^-$ solutions (approximately, $1,000{\mu}g/L$) in the presence of background salts (NaCl, $Na_2SO_4$, and $CaCl_2$) at various pH values (3.5, 7, and 9.5) and solution ionic strengths (0.001, 0.01, and 0.01 M NaCl) in the presence of natural organic matter (NOM). Rejection by the membranes increased with increasing solution pH owing to increasingly negative membrane charge. In addition, the rejection of the target ion by the membranes increased with increasing solution ionic strength. The rejection of $ClO_4^-$ was consistently higher for the RO membrane than for the NF membrane and $ClO_4^-$ rejection followed the order $CaCl_2$ < NaCl < $Na_2SO_4$ at conditions of constant pH and ionic strength for both the RO and NF membranes. The possible influence of NOM on $ClO_4^-$ rejection by the membranes was also explored.

• 한국표면공학회지
• /
• 제55권2호
• /
• pp.102-119
• /
• 2022

Gold plating is used as a coating of connecter in printed circuit boards, ceramic integrated circuit packages, semiconductor devices and so on, because the film has excellent electric conductivity, solderability and chemical properties such as durability to acid and other chemicals. As increasing the demand for miniaturization of printed circuit boards and downsizing of electronic devices, several types of electroless gold plating solutions have been developed. Most of these conventional gold plating solutions contain cyanide compounds as a complexing agent. The gold film obtained from such baths usually satisfies the requirements for electronic parts mentioned above. However, cyanide bath is highly toxic and it always has some possibility to cause serious problems in working environment or other administrative aspects. The object of this investigation was to develop a cyanide-free electroless gold plating process that assures the high stability of the solution and gives the excellent solderability of the deposited film. The investigation reported herein is intended to establish plating bath composition and plating conditions for electroless gold plating, with thiomalic acid as a complexing agent. At the same time, we have investigated the solution stability against nickel ion and pull strength of solder ball. Furthermore, by examining the characteristics of the plated Au plating film, the problems of the newly developed electroless Au plating solution were improved and the applicability to various industrial fields was examined. New type electroless gold-plating bath which containing thiomalic acid as a complexing agent showing so good solution stability and film properties as cyanide bath. And this bath shows the excellent stability even if the dissolved nickel ion was added from under coated nickel film, which can be used at the neutral pH range.

• 멤브레인
• /
• 제32권3호
• /
• pp.173-180
• /
• 2022

음용수 속 암모니아의 존재는 인간의 건강에 매우 해롭다. 농작물에서의 비료 사용, 산업 폐수, 화석 연료의 연소와 같은 활동으로 인해 가용성 암모니아는 지하수를 오염시킨다. 물에 존재하는 암모니아 농도가 낮더라도 해양생물 등의 수생환경을 훼손한다. 막 기술은 암모니아를 물로부터 효과적으로 제거하기 위한 매우 중요한 과정이다. 평평한 시트 막, 막 접촉기, 그리고 막 증류법은 암모니아를 제거하여 물을 정화하는 데 사용되는 방법들 중 하나이다. 막 접촉기는 막 증류법과는 달리 상변화 없이 액체와 가스 간의 또는 액체와 액체간의 질량 전달을 통해 암모니아를 제거하는 효율적인 공정이다. 다만 이 방법은 pH가 매우 높아 암모니아 제거에 비용이 많이 든다. 제올라이트는 우수한 이온 교환 능력을 가지고 있는데, 이는 암모니아와의 상호작용을 향상시켜 폐수로부터 흡착하는 능력을 향상시킨다. 제올라이트를 함유한 혼합 매트릭스 막은 암모니아 흡착 및 폐수로부터의 분리 효율을 향상시킨다. 이 리뷰에서는 위에서 소개된 내용이 자세히 논의될 것이다.

• 한국의류학회지
• /
• 제13권2호
• /
• pp.128-136
• /
• 1989

In order to investigate a practical application of fibrous adsorbents to heavy metal ions, amidoxime fibers, as a particular class of solid chelate agents, were prepared by hydroxylamine treatment for acrylic fibers in a recipe of neutralization. Among the important problems from plant effluents are toxic concentrations of heavy metals such as copper. Accordingly, the properties of Cu (II) adsorption and its chelates were studied. The results obtained are as follows; The fibrous adsorbents have the property of increasing the swelling volumes by amidoximation. The adsorption of Cu (II) ion is characterized by an endothermic reaction, which is estimated as the plus values in the enthalpy change ($\delta$H=1.30 Kcal/mol. and 3.14 Kcal/mol.). The Cu (II) ions are adsorbed in the range of pH $3\~8$ and the maximum adsorptions are occurred about pH 8. Owing to the anions $(NO_3^-,\;Cl^-)$ of copper salts, amidoxime fibers form 1:1 and 2:1 (ligand: metal) chelating complexes with Cu (II). The nitrate anion chelates to amide I (NH) of amidoxime groups and the chlorine anion does to nitrosyl (NO). These effects relate to the crystallization of the complex and the thermal property.