• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.796-801
• /
• 2005

Time management is one of the critical tasks in project management. Based on the theories of total quality management, this authors presented a project time management method, total time management (TTM), so as to facilitate highway project time management. This paper discussed the four fundamental characteristics of TTM: total factors management, staff management, project life cycle management, and Plan-Do-Check-Action (PDCA) cycle management. Now, most managers use computer software to manage the project. In order to make the theory of TTM more executable, the authors develop a project time management system suitable for TTM. This paper presents this time management system's analysis processes including system requirement, key functions etc..

• 한국멀티미디어학회논문지
• /
• 제8권12호
• /
• pp.1589-1596
• /
• 2005

The imprecise real-time system provides flexibility in scheduling time-critical tasks. Most scheduling problems of satisfying both 0/1 constraint and timing constraints, while the total error is minimized, are NP complete when the optional tasks have arbitrary processing times. Liu suggested a reasonable strategy of scheduling tasks with the 0/1 constraint on uniprocessors for minimizing the total error. Song et al suggested a reasonable strategy of scheduling tasks with the 0/1 constraint on multiprocessors for minimizing the total error. But, these algorithms are all off-line algorithms. On the other hand, in the case of on line scheduling, Shih and Liu proposed the NORA algorithm which can find a schedule with the minimum total error for a task system consisting solely of on-line tasks that are ready upon arrival. But, for the task system with 0/1 constraint, it has not been known whether the NORA algorithm can be optimal or not in the sense that it guarantees all mandatory tasks are completed by their deadlines and the total error is minimized. So, this paper suggests an optimal algorithm to search minimum total error for the imprecise on-line real-time task system with 0/1 constraint. Furthermore, the proposed algorithm has the same complexity, O(N log N), as the NORA algorithm, where N is the number of tasks.

• 대한안전경영과학회지
• /
• 제7권2호
• /
• pp.1-12
• /
• 2005

TPM(Total Productive Management) that is enforcing introducing more than $80\%$ in domestic manufacturing industry is using total plant efficiency by the evaluation index, and as a result, can see a lot of examples that plant productivity is increased. This study's purpose centers total productive management activities that is management system for total plant efficiency's maximization, plant information system that total productive management activities factor that is enforcing in manufacturing industry can develop evaluation model that can evaluate qualitative activities by quantitative activities in process that maximize total plant efficiency wishes to do design.

• 한국초전도ㆍ저온공학회논문지
• /
• 제2권1호
• /
• pp.7-13
• /
• 2000

A rotating cryogenic system was designed similar to the cooling system for the rotor of a superconducting generator. The experimental rotor has an inner vessel which simulates the winding space of an actual superconducting rotor, and a torque tube of comparable design. This paper describes the evaluation of the total heat leak into the inner vessel that leads to the study of the heat transfer characteristic of the rotating cryogenic system. To examine the insulation performance of the experimental rotor. temperature was measured at each part of the system at various rotaing speeds from 0 rpm to 600 rpm. Total heat leak into the inner vessel was calculated by measuring the boil-off rate of liquid helium. Conduction heat leak to the inner vessel was obtained by the vent tube, and radiation heat leak was calculated by subtracting the conduction heat lent from the total heat leak. There seemed to be no rotaional dependency of total heat leak at least up 600 rpm.

• 한국환경과학회지
• /
• 제10권1호
• /
• pp.13-19
• /
• 2001

An on-line digestion system based on the flow injection analysis technique was presented for the determination of total phosphorus. The system converts condensed and organic phosphoruses into orthophosphate that can be analyzed spectrophotometically. The reaction between orthophosphate and ammonium molybdate in a strong acid medium forms the yellow complex of phosphomolybdate which is next reduced to a molybdic blue complex by stannous chloride. The quantitation of orthophosphate is based on the absorbance of the molybdic blue. To determine total phosphorus, the digestion system was installed between the sample injector and the reaction coil with the added lines of digestion solution(potassium persulfate+sulfuric acid) and the $H_2O$ carrier. The system has shown that the digestion efficiencies were greater than 95% for the typical condensed and organic phosphoruses. When tripolyphosphate standards were used, the calibration data showed that the linear dynamic range extended to a concentration of 1.5ppm with the detection limit of 25ppb total phosphorus. The typical relative standard deviation was less than 2%. The proposed system was successfully applied to lake water, wastewater, and streamwater. The analytical variables such as digestion efficiency, analysis time, and reproducibility were evaluated and compared with the manual digestion method.

• Journal of Power Electronics
• /
• 제8권4호
• /
• pp.309-316
• /
• 2008

In this paper, new topology is proposed that can dramatically reduce the converter power rating and increase the efficiency of total PV system. Since the output voltage of PV module has very wide voltage range, in general, the DC/DC converter is used to get constant high DC voltage. According to analysis of PV characteristics, in proposed topology, only 20% power of total PV system power is needed for DC/DC converter. DC/DC converter used in proposed topology has flat efficiency curve at all load range and very high efficiency characteristics. The total system efficiency is the product of that of converter and that of inverter. In proposed topology, because the converter efficiency curve is flat all load range, the total system efficiency at the low power range is dramatically improved. The proposed topology is implemented for 200kW PCS system. This system has only three DC/DC converters with 20kW power rating each other. It is only one-third of total system power. The experiment results show that the proposed topology has good performance.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.377-381
• /
• 2007

Nonlinear effects and chromatic dispersion are the main causes of pulse degradation in high bit-rate WDM transmission systems and several architectures have been proposed to compensate them by means of optical phase conjugation. In this paper, a new method to exploit an optical phase conjugator (OPC) for nonlinearity and dispersion cancellation is disclosed. The proposed method is using optimal total dispersion of each fiber sections and it is simpler than those previously described in literature. Power penalty between WDM channels and the maximum launch power in $28{\times}40$ Gbps WDM transmission system designed by optimal total dispersion are more decreased and more increased than those in the conventional WDM transmission system with OPC, respectively. Furthermore, optimal total dispersion proposed in this research should provide the flexible design of WDM system, which less depends on OPC position.

• 소음진동
• /
• 제4권3호
• /
• pp.327-335
• /
• 1994

In this paper, to identify the dynamic characteristics of antenna system, the antenna is divided into 4 components and those were analyzed with a conventional FEM package MSC/NASTRAN. Using a Component Mode Synthesis Method, dynamic characteristics of total system is also identified. The Coherence of each component to total system is evaluated by using strain and kinetic component to total system is evaluated by using strain and kinetic energy. The improving strategy of dynamic characteristics is suggested by changing mass and stiffness of large coherence components.

• 디지털융복합연구
• /
• 제13권1호
• /
• pp.205-213
• /
• 2015

디지털 다매체 다채널 시대를 맞이하여 인터넷, 케이블, 그리고 위성방송 및 IPTV 등의 뉴미디어의 성장으로 지상파 방송은 시청률 저하와 함께 광고비 또한 급격히 하락하고 있다. 이러한 상황에서 지상파 TV에 광고총량제를 도입하자는 의견이 나타나고 있다. 따라서 본 연구에서는 이러한 광고총량제 도입이슈에 대해 일반인과 전문가의 인식을 비교함으로써 광고총량제 도입에 대한 타당성을 검토하고자 하는 목적에서 이루어졌다. 연구결과 첫째, 지상파 TV에 광고총량제를 도입하자는 의견에 대해 일반인과 전문가들 사이에 인식차이가 높게 나타났다. 둘째, 총량제도의 바람직한 적용단계에 대해 일반인과 전문가 모두 매체간 단계적/제한적 허용에 대해 찬성하는 것으로 나타났다. 셋째, 총량제도의 장점에 대해 일반인들보다는 전문가들의 긍정 응답이 높게 나타났다. 끝으로, 총량제도의 단점에 대해 일반인들이 전문가들에 비해 긍정 응답이 높은 것으로 나타났다. 이러한 광고총량제 도입의 타당성 자료는 향후 광고총량제 시행에 대한 근거를 제공해 줄 것으로 기대한다.

• 한국병원경영학회지
• /
• 제21권2호
• /
• pp.24-36
• /
• 2016

The aims of this study is to investigate the status of nursing care delivery systems and nurse staffing levels and to analyze differences in the quality of nursing care by the type of nursing care delivery system. This research was based on data from 723 nurses working in 55 medical and surgical units in 26 general hospitals. Descriptive statistics on nurse staffing levels and the nursing care delivery system, and multi-level logistic regression were used to estimate the determinants of quality of nursing care. The number of patients per nurse is 17.74 patients in functional nursing care and 15.56 patients in total nursing care. In comparison to hospitals adopting total nursing care, hospitals with functional nursing care had greater patients. The nurses rated units using total nursing care as significantly better quality of nursing care than the units with functional nursing care. Total nursing care or modified total nursing care, rather than functional nursing care, could lead to improvement in the quality of care(total nursing care OR=3.895, modified total nursing care OR=2.475). Patient-centered approaches under proper circumstances can be successfully implemented and the positive effects demonstrated.