• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.5
• /
• pp.601-608
• /
• 2014

A coagulation-flocculation (CF) process using aluminum sulfate as a coagulant was employed to treat highly suspended solids in tunnel wastewater. Response surface methodology (RSM) based on a Box-Behnken design was applied to evaluate the effects of three factors (coagulant dosage, pH and temperature) on total suspended solids (TSS) removal efficiency as well as to identify optimal values of those factors to maximize removal of TSS. Optimal conditions of coagulant dosage and pH for maximum TSS removal changed depending on the temperature ($4{\sim}24^{\circ}C$). As temperature increased, the amount of coagulant dosage and pH level decreased for maximum TSS removal efficiency during the CF process. Proper adjustment of optimal pH and coagulant dosage to accommodate temperature fluctuations can improve TSS removal performance of the CF process.

• Environmental Engineering Research
• /
• v.22 no.2
• /
• pp.141-148
• /
• 2017

Globalization, industrialization, mining, and uncontrolled population growth have fostered a shortage of potable water. Therefore, it has become imperative to understand an effective and reasonable water purification technique. A renewed interest in electrocoagulation (EC) has been spurred by the search for reliable, cost-effective, water-treatment processes. This paper has elucidated a technical approach for getting rid of heavy metals and total suspended solids (TSS) from synthetic water using an aluminum electrode. The effect of operational parameters, such as current density, inter-electrode distance, operating time, and pH, were studied and evaluated for maximum efficiency. This study corroborates the correlation between current density and removal efficiency. Neutral pH and a low electrode gap have been found to aid the efficacy of the EC setup. The outcome indicates that a maximum TSS removal efficiency of 76.6% occurred at a current density of $5.3mA/cm^2$ during a contact time of 30 min. In the case of heavy metals remediation, 40 min of process time exhibited extremely reduced rates of 99%, 59.2%, and 82.1%, for Cu, Cr, and Zn, respectively. Moreover, kinetic study has also demonstrated that pollutants removal follows first-and second-order model with current density and EC time being dependent.

• Environmental Engineering Research
• /
• v.19 no.2
• /
• pp.151-155
• /
• 2014

This study compares the effects of flow on oil and suspended solids removal efficiencies in circular enhanced gravity plate separator equipped with coalescence medium. Coalescence medium acts to capture rising oil droplets and settling solid particles and assist in the coalescence of oil and coagulation of solid. The circular separator uses an upflow center-feed perforated-pipe distributor as the inlet. The co-current flow is achieved using 4 increasing sizes of frustum, whereas cross flow uses inclined coalescence plates running along the radius of the separator. The different arrangement gave the cross flow separator a higher coalescence plan area per operational volume, minimal and constant travelling distance for the oil droplets and particles, lower retention time, and higher operational flowrate. The cross flow separator exhibited 6.04% and 13.16% higher oil and total suspended solids removal efficiencies as compared to co-current flow.

• The Journal of the Korea Contents Association
• /
• v.6 no.10
• /
• pp.1-8
• /
• 2006

The new system evaluating the pollution of the water quality for the branches of geum river using the fuzzy integral was proposed in this study. In this paper, the five individual factors, such as BOD(biochemical oxygen demand), COD(chemical oxygen demand), SS(suspended solids), T-N(total nitrogen), and T-P(total phosphorus) are selected. The measurement of fuzzy integral was determined depending on the degree of how they affect the pollution of water quality. The real values for the five factors measured and obtained from the branches of the geum river was normalized to ranging from 0 to 1. Finally, using the fuzzy integral, the degree of the pollution for the branches of geum river was expressed as the real numerical number. As a result, it appears that this approach can be proposed as the new system evaluating the pollution of the water quality for the branches of the geum river.

• Fisheries and Aquatic Sciences
• /
• v.7 no.2
• /
• pp.76-83
• /
• 2004

To supply fresh and quality quarantined seafood in live seafood specialty restaurants, facilities for short-term culture or holding of live marine fish and shellfish are a necessity. In this study, the performance of a simple recirculating aquarium system for the culture and holding of marine fish was evaluated. The aquarium system consisted of a culture tank, a foam fractionator for solids removal, and a Styrofoam bead filter for nitrification and solids trapping. In the first trial, the aquarium was stocked with a total of 12 kg Korean rockfish, which were fed approximately $0.5\%$ of the total fish body weight daily. During the 2-month culture period, total ammonia nitrogen (TAN) and nitrite nitrogen $(NO_2-N)$ concentrations remained below 1mg/L and 2mg/L, respectively. The chemical oxygen demand (COD) fluctuated between 13.6 and 31.2 mg/L on selected sampling days. The total suspended solids (TSS) removed by the foam fractionator was between 2.7 and 4.6g daily. The Styrofoam bead filter not only reduced TAN and $NO_2-N$ in the culture tank water, but also trapped solids equivalent to 8.3-26.7\% of the weight of feed supplied. In Trial 2, 30kg of live fish were held in the aquarium without feeding for a 24-hour period and the water quality parameters were monitored. TAN and $NO_2-N$ concentrations first increased and then decreased to around 0.3mg/L. These results demonstrate that the recirculating aquarium system is a functional option for the short-term culture or holding of marine fish.

• Journal of Ecology and Environment
• /
• v.38 no.4
• /
• pp.505-515
• /
• 2015

The objectives of this study were to determine the effects of stream nutrient regime, N:P ratios and suspended solids on fish tolerance/trophic compositions and stream ecosystem health, based on multi-metric model, during 2008-2013. Also, stream ecosystem health was evaluated in relation to chlorophyll-a (CHL) as a measure of algal productivity or indicators of trophic state to water chemical parameters. Total number of sampled fish species were 50 and showed a decreasing trend from 2008 to 2013. The minnow of Zacco platypus, based on the catch per unit effort (CPUE), was the most dominant species (25.9%) among the all species. Spatial heterogeneity was evident in the fish tolerance guilds that showed the dominance of sensitive species (89%) in the headwaters (S1) and the dominance of tolerant species (57%) in the urban. These conditions were directly influenced by concentrations of nutrients and organic matter (COD). The N:P ratios, as a barometer of water pollution, had a negative linear function (R² = 0.40, P < 0.01) with CHL, and the ratios had an important role in changes of COD concentration (R² = 0.40, P < 0.01). Under the circumstances, the N:P ratio directly influenced the relative proportions of fish trophic/tolerance compositions. According to the regression analysis of omnivore (O_m) and insectivore sp. (I_n) on total nitrogen and total phosphorus, nitrogen had no significant influences (P > 0.05) to the two compositions, but phosphorus influenced directly the two guilds [slope (a) = -32.3, R² = 0.25, P < 0.01 in the I_n; a = 40.7, R² = 0.19, P < 0.01 in the O_m]. Such water chemistry and fish trophic guilds determined the stream ecosystem health, based on the multi-metric fish model.

• Journal of Ecology and Environment
• /
• v.38 no.2
• /
• pp.145-156
• /
• 2015

This study was based on water quality data of the Lake Doam watershed, monitored from 2010 to 2013 at eight different sites with multiple physiochemical parameters. The dataset was divided into two sub-datasets, namely, non-rainy and rainy. Principal component analysis (PCA) and factor analysis (FA) techniques were applied to evaluate seasonal correlations of water quality parameters and extract the most significant parameters influencing stream water quality. The first five principal components identified by PCA techniques explained greater than 80% of the total variance for both datasets. PCA and FA results indicated that total nitrogen, nitrate nitrogen, total phosphorus, and dissolved inorganic phosphorus were the most significant parameters under the non-rainy condition. This indicates that organic and inorganic pollutants loads in the streams can be related to discharges from point sources (domestic discharges) and non-point sources (agriculture, forest) of pollution. During the rainy period, turbidity, suspended solids, nitrate nitrogen, and dissolved inorganic phosphorus were identified as the most significant parameters. Physical parameters, suspended solids, and turbidity, are related to soil erosion and runoff from the basin. Organic and inorganic pollutants during the rainy period can be linked to decayed matters, manure, and inorganic fertilizers used in farming. Thus, the results of this study suggest that principal component analysis techniques are useful for analysis and interpretation of data and identification of pollution factors, which are valuable for understanding seasonal variations in water quality for effective management.

• Environmental Engineering Research
• /
• v.22 no.2
• /
• pp.203-209
• /
• 2017

Innovations in the biofiltration process can provide effective solutions to overcome crucial water pollution problems. The elimination of pollutants is a result of the combined effects of biological oxidation, adsorption and filtration processes. This research aims to evaluate the performance of quartz sand biofiltration for removing total suspended solids, turbidity, color, organic matter, and ammonium from polluted river water and develop an empirical model for designing quartz sand biofilters for the treatment of polluted river water. Experiments were conducted using two biofilter units filled with quartz sand as filter media. A set of experiments were performed to evaluate the effect of hydraulic retention time on biofilter performance in removing water contaminants. The kinetics of organic matter removal were also determined to describe the performance of the biofilter. The results show that biofiltration can significantly remove river water pollutants. Removal efficiency depends on the applied hydraulic retention time. At a hydraulic retention time of two hours, removal efficiencies of total organics, ammonium and total suspended solids were up to 78%, 82%, and 91%, respectively. A model for designing quartz sand biofiltration has been developed from the experimental data.

• Advances in environmental research
• /
• v.9 no.4
• /
• pp.233-249
• /
• 2020

To date, there is no central wastewater (WW) treatment plant in Erbil city, Kurdistan region, Iraq. Therefore, raw WW disposes to the environment and sometimes it used directly for irrigation in some areas of Erbil city. Disposal of the untreated WW to the natural environment and using for irrigation it causes problems for the people and the environment. The aims of the current work were to study the characteristics, design of primary and different secondary treatment units and reusing of produced WW. Raw WW samples from Ashty city-Erbil city were collected and analyzed for twenty three quality parameters such as Total Suspended Solids (TSS), total dissolved solids, total volatile and non-volatile solids, total acidity, total alkalinity, total hardness, five-day Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), biodegradability ratio (BOD5/COD), turbidity, etc. Results revealed that some parameters such as BOD5 and TSS were exceeded the standards for disposal of WW. Design and calculations for primary and secondary treatment (biological treatment) processes were presented. Primary treatment units such as screening, grit chamber, and flow equalization tank were designed and detailed calculation were illustrated. While, Conventional Activated Sludge (CAS), Sequencing Batch Reactor (SBR) and Moving Bed Biofilm Reactors (MBBR) were applied for the biological treatment of WW. Results revealed that MBBR was the best and economic technique for the biological treatment of WW. Treated WW is suitable for reusing and there is no restriction on use for irrigation of green areas inside Ashty city campus.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.176-185
• /
• 1998

For the sustainable production of cultured arkshell Scapharca broughtonii and pre-estimation of the harvest of it, we investigated the relationship between the habitat environmental factors and the physiological conditions of the arkshell in the two experiment sites near the Chinhae Bay, Korea. For the analysis of habitat environmental factors such as temperature, salinity, dissolved oxygen, DIP (dissolved inorganic phosphate), DIN (dissolved inorganic nitrogen), suspended solids and chlorophyll a of bottom water and T-S (total sulfide) and COD (chemical oxygen demand) of surface sediment were measured, To determine physiolosical condition of cultured arkshell, shell length, fatness, glycogen, hemoglobin content and gametogenesis were examined. Water temperature were higher in Woongchon than in Songdo in 1992, and were Higher in Songdo in 1993. Salinity were higher in Songdo than in Woongchon except from January to May in 1992. COD, suspended solids and chlorophyll a content were higher in Songdo than in Woongchon, while the contents of sediment sulfide, DO, DIP and DIN were higher in Woongchon. Based on the environmental assessment, significant factors affecting the growth and physiological condition of arkshell were quantity of food and total sulfide content in the bottom sediment.