• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.156-159
• /
• 2004

The intention of this study is to reduce the plastic shrinkage of the polymer modified cement mortar using the PVA fiber. The durability of PVA fiber reinforced polymer cement mortar was also evaluated. The test results of PVA fiber reinforced polymer modified cement mortar were compared with plain polymer modified cement mortar(non-fiber). In conclusion, PVA fiber reinforced polymer modified cement mortar showed an ability to reduce the total crack area and maximum crack width significantly. Also. fiber reinforced polymer modified cement mortar show improved durability performance.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.431-439
• /
• 2020

Soil-water retention curve (SWRC) contains key information for the application of unsaturated soil mechanics principles to engineering practice. The SWRC variables are commonly used to describe the hydro-mechanics of soils. Generally, these parameters are determined using the graphical method which can be time consuming. The SWRC is highly dependent on the pore size distribution (PSD). Theoretically, the PSD obtained by mercury intrusion porosimetry test can be used to determine some SWRC variables. Moreover, the relationship between SWRC and shrinkage curve has been investigated. A new method to determine total SWRC variables directly without curve-fitting procedure is proposed. Substituting the variables into linear SWRC equations construct SWRC. A good agreement was obtained between predicted and measured SWRCs, indicating the validity of the proposed method for unimodal SWRC.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.251-258
• /
• 2003

The early -age behavior of base restrained reinforced concrete (RC) walls is analyzed using a three-dimensional finite element method in this study. After calculating the temperature and internal relative humidity variations of an RC wall, determination of stresses due to thermal gradients, differential drying shrinkage, and average drying shrinkage is followed, and the relative contribution of these three stress components to the total stress is compared. The mechanical properties of early-age concrete, determined from many experimental studies, are taken into consideration, and a discrete reinforcing steel derived using the equivalent nodal force concept is also used to simulate the cracking behavior of RC walls. In advance, to Predict the crack spacing and maximum crack width in a base restrained RC wall, an analytical model which can simulate the post-cracking behavior of an RC tension member is introduced on the basis of the energy equilibrium before and after cracking of concrete.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권6호
• /
• pp.20-29
• /
• 2016

이 연구에서는, 우리나라 전통 건축재료 중 하나인 천연 황토 모르타르에 사용되어 온 해초풀과 현대적 재료인 고흡수성수지(Superabsorbent Polymer, SAP)와 같은 흡수성 물질이 이러한 모르타르의 건조수축과 압축강도에 미치는 영향이 조사되었다. 흡수성 물질과 더불어 문화재표준시방서에서 권고하는 초기 밀봉양생의 효과 역시 검토되었다. 실험에 의한 28일 압축강도와 수렴한 건조수축 변형율의 검토 결과, 우선 초기 7일간의 밀봉 양생은 강도향상과 수축저감에 효과적이었다. 따라서, 문화재표준시방서의 권고는 합리적이며 실효성이 있는 것으로 검증된다. 흡수성 물질의 혼입 역시 두 재료특성에 있어 효과적인데, 그 효과는 물질들의 흡수 능력에 의존한다. 따라서, 흡수 능력이 더 높은 SAP을 사용하는 것이 해초풀을 사용하는 것보다 더 효과적이다. 그러나, 이러한 것들이 유효하기 위해서는 초기 밀봉양생과 물이 추가되지 않는 조건들이 함께 따라야 한다. 마지막으로, 황토 모르타르의 압축강도의 증가는 건조수축의 감소와 선형적으로 관계한다. 이러한 선형 상관성에 의해, 초기밀봉 양생 또는 흡수성 물질의 혼입에 따른 모르타르의 압축강도 증가하는 원인이 정량적으로 설명될 수 있다.

• 한국주조공학회지
• /
• 제35권6호
• /
• pp.147-154
• /
• 2015

The effects of Sc and Sr elements on the modification of the eutectic $Mg_2Si$ phase and the castability were investigated in the Al-4wt%Mg-0.9wt%Si-0.3wt%Mn-0.15wt%Fe alloy. Measurements of the cooling curve and microstructure observations were performed to analyze the additional effects of Sc and Sr minor elements during the solidification process. A prominent effect found on the modification of the eutectic $Mg_2Si$ phase with additions of the Sr and Sc elements. Here, a fine eutectic $Mg_2Si$ phase and a decrease in the growth temperature of the eutectic $Mg_2Si$ phase were evident with an addition of Sc element up to 0.2 wt%. The growth temperature of the eutectic $Mg_2Si$ phase decreased and the effect on the modification of the eutectic $Mg_2Si$ phase increased with the addition of Sr element up to 0.02 wt%. The addition of 0.02wt%Sr had the strongest effect on the modification of the eutectic $Mg_2Si$ phase, and the resulting microstructure of the eutectic $Mg_2Si$ phase was found to have a fibrous morphology with a decreased aspect ratio and an increased modification ratio. Fluidity and shrinkage tests were conducted to evaluate the castability of the alloy. The addition of 0.02wt%Sr effectively increased the fluidity of the alloy, while an addition of Sc did not show any effect compared to when nothing was added. The maximum filling length was recorded for 0.01wt%TiB-0.02wt%Sr owing to the effect of the fine ${\alpha}$-Al grains. The macro-shrinkage ratio decreased, while the micro-shrinkage ratio increased with the addition of various eutectic modifiers. The highest ratio of micro-shrinkage was recorded for the 0.02wt%Sr condition. However, the total shrinkage ratio was nearly identical regardless of the amounts added in this study.

• Restorative Dentistry and Endodontics
• /
• 제36권3호
• /
• pp.188-195
• /
• 2011

연구목적: 새로운 silorane 복합레진의 중합수축응력을 기존의 methacrylate 계열의 복합레진과 비교 분석하는 것이다. 연구 재료 및 방법: Z250, P60, P90 각 군당 10개의 시편을 준비하였다. 시편에 스트레인 게이지를 부착하고 각 재료의 제조사에서 추천하는 접착제 도포 후 10초간, 수복 재료 적용 후 40초간 할로겐 광조사기로 광중합한 뒤 중합수축응력을 측정 하였다. 외경 10 mm, 내경 7 mm, 높이 3 mm의 아크릴릭 주형을 준비하고 주형의 내면은 5초간 sandblasting 처리한 후, 30초간 35% 인산으로 산부식 시행하였다. 주형의 외면은 Cyanoacrylate adhesive (SOKKI)로 스트레인 게이지를 부착하였다. 주형의 내면과 복합 레진을 접착하기 위한 접착제로 methacrylate 기질의 복합 레진 2종은 Single Bond (3M ESPE)를, silorane 기질의 복합레진은 P90 Adhesive system (3M ESPE)을 적용하였고 할로겐 광조사기를 사용하여 10초간 광중합하였다. 시편에 부착된 스트레인 게이지를 TML data logger에 연결시키고 광중합 전의 초기값을 설정한다. 중합시간은 모든 군의 에너지 총량을 동일하게 하기 위해 400 mW/$cm^2$의 광강도로 설정하여 40초간 광중합하였다. 광중합 시점부터 1초 간격으로 800초 간의 스트레인 값을 측정하였고 스트레인 값은 Hooke's law를 이용하여 각 시점의 수축응력으로 환산하여 기록하였다. 결과: 1. 모든 군에서 광중합 직후에는 일시적으로 팽창하였다가 급속한 수축률을 보였고 시간이 지날수록 수축률이 감소하는 경향을 보이다가 200초 이후에는 수축률이 완만해지는 양상을 보였다. 2. 모든 군에서 수축응력이 계속 증가하였고, silorane 기질의 복합레진 P90이 methacrylate 기질의 복합레진 Z250, P60 보다 낮은 수축응력 값을 보였다(p < 0.05). 3. Methacrylate 기질의 복합레진인 Z250과 P60 두가지 재료간 수축응력에는 통계적으로 유의한 차이가 없었다(p > 0.05). 결론: Silorane 기질 복합레진의 사용은 methacrylate 기질 복합레진보다 중합수축응력이 더 작을 것으로 기대되지만 silorane 기질 복합레진의 탄성계수에 있어서 다소 불리한 특성이 보고되는 바, 임상적 적용에 앞서 이에 대한 충분한 고찰 및 추가적인 연구가 더 필요할 것으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.86-87
• /
• 2017

The high-temperature creep of Ultra-High-Strength Concrete (UHSC) has been investigated in this study. The purpose of this study is to evaluated total strain and high-temperature creep at elevated temperatures under loading condition of UHSC. As results, Total strain of UHSC increased showing shrinkage with increasing compressive strength. The high-temperature creep of UHSC increased with the temperature and higher level of compressive strength showed bigger high-temperature creep.

• Clinical and Experimental Reproductive Medicine
• /
• 제42권3호
• /
• pp.94-100
• /
• 2015

Objective: The goal of this study was to ascertain optimal assisted hatching (AH) method in frozen embryo transfer. We compared the effect of depending on whether mechanical or laser-AH was performed before or after the vitrification of embryo development rate and blastocyst cell numbers. Methods: In order to induce superovulation, pregnant mare's serum gonadotropin followed by human chorionic gonadotropin were injected into 4- to 5-week-old female mice. 2-cell embryos were then collected by flushing out the oviducts. The Expanded blastocysts were recovered after the collected embryos were incubated for 48 hours, and were then subjected to artificial shrinkage (AS) and cross-mechanical AH (cMAH) or quarter-laser zona thinning-AH (qLZT-AH) were carried out using the expanded blastocysts before or after vitrification. After 48 hours of incubation, followed by vitrification and thawing (V-T), and blastocysts were fluorescence stained and observed. Results: The rate of formation of hatched blastocysts after 24 and 72 hours of incubation was significantly higher in the AS/qLZT-AH/V-T group than in the other groups (p<0.05). The cell number of the inner cell mass was higher in AS/V-T/non-AH and AS/V-T/cMAH groups than those of others (p<0.05). In the control group, the number of trophectoderm and the total cell number were higher than in the AS-AH group (p<0.05). Conclusion: The above results suggest that AS and AH in vitrification of expanded blastocysts lead to the more efficient formation of hatched blastocysts in mice.

• 한국재료학회지
• /
• 제9권7호
• /
• pp.735-739
• /
• 1999

본 연구에서는 sol-gel법으로 제조된 $PbTiO_3$ (PT) 단층박막내의 실시간 응력과 두께 수축거동, 그리고 다층박막의 미세경도를 온도의 함수로 측정하여 열처리에 따른 PT박막내의 물리화학적 변화를 설명하였다. 단층박막은 상온에서 $220^{\circ}C$까지 급격한 수축을 보였으며 총수축량의 83%가 이 온도구간에서 일어났다. as-spun된 박막 내에는 이미 75MPa의 인장응력이 존재하였으며 13$0^{\circ}C$부터 뚜렷이 증가하여 $250^{\circ}C$에서 147MPa의 최대 인장응력을 나타냈다. 인장응력의 급격한 감소가 일어나는 $370^{\circ}C$부터는 본격적으로 치밀화된 PT박막과 Si 기판과의 열팽창계수 차이가 주로 박막내의 응력을 결정하며, 이것은 다층박막의 미세경도가 $300^{\circ}C$ 이후에서 급격히 증가하는 사실로도 뒷받침된다. 한편 다층박막에서 단층박막과 달리 $550^{\circ}C$까지 열처리후 Perovskite 상이 많이 생성되었으며 이는 박막 두께의 증가에 따른 homogenous 핵생성 site의 증가 때문이라고 생각된다

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.388-395
• /
• 2000

This study was performed to examine the effects of infrared (IR)/heated-air combination drying on some quality attributes of Korean white ginsengs. Ginseng roots were dried in a dryer where both the far infrared ray and heated-air are available as drying energy sources. Diametral shrinkage, external color, total saponin content, and ginsenosides and free sugar composition of the IR/heated-air combination dried ginsengs were measured and compared with those of commercial white ginseng products. The external color became lower in lightness and higher in saturation as the IR radiating plate temperature increased. IR/heated-air combination dried white ginsengs at IR plate temperature of 100$^{\circ}C$ was comparable to the commercial white ginseng products in color characteristics. Diametral shrinkage ratios ranged from 20 to 36% and appeared to be independent on the different drying methods. No definite evidence could be found whether the IR/heated-air combination drying and the conventional. hot-air drying practice resulted in white ginsengs having different ginsenoside contents and compositions. No conclusion could be made on whether the various drying treatments used in the study had effects on the free sugar contents and compositions of white ginsengs.