• 한국지구과학회지
• /
• 제18권6호
• /
• pp.515-521
• /
• 1997

난지도 매립장 매립물의 특성을 조사하기 위해서 중력, 자력, LandSat TM 열적외선 밴드 자료, 매립장의 표면에서 측정한 침하량 자료 등을 다변량 통계분석기법을 응용하여 분석하였다. 분석에 이용한 자료들은 각기 상이한 깊이에 관한 정보를 제공하기 때문에 측정된 총 자력자료와 중력자료는 자극화변환된 자력이상과 매립장의 3차원 밀도분포로 각기 전환하였으며, 본 연구에서는 이 중 매립장의 상부층에 관한 정보를 이용하였다. 통계분석은 침하량 측정 지점들을 대상으로 수행하였으며, 이들 지점에서의 자극화변환 자력이상, 매립물의 밀도, LandSat TM 열적외선 밴드 값들은 내삽방법을 이용하여 구하였다. 자료분석에 사용한 다변량 통계분석 기법은 개체간의 기하학적인 거리를 이용하여 군집화하는 집락분석으로, 개체간의 거리 계산시 각 자료간의 상이한 측정단위가 주는 효과를 제거하기 위해서 사전에 표준화를 실시하였다. 군집화는 체계적 군집화 방법을 이용하여 수행하였다. 물리적 특성을 바탕으로 분류된 최적의 군집수는 수상도에서 나타난 결과에 따르면 총 6개의 군집으로 나타났다. 본 연구의 결과는 통합된 지구물리자료에 다변량 통계분석 기법을 적용함으로써 복합적 인 쓰레기 매립장의 특성 규명이 가능함을 시사한다.

• 원예과학기술지
• /
• 제30권5호
• /
• pp.484-492
• /
• 2012

본 연구는 정자기장 처리가 실내 관엽식물의 생육 및 생리적 특성에 미치는 영향과 그 작용 메커니즘을 파악하기 위해 수행되었다. 이를 위해 스파티필름(Spathiphyllum spp), 산호수(Ardisia pusilla DC.), 싱고니움(Syngonium podophyllum), 홀리아페페(Peperomia pereskiifolia) 및 필레아(Pilea cadierei)의 5종 관엽식물을 대상으로 안쪽 바닥면에 표면자속밀도 3,500G의 이방성 NdFeB계 원형 소결영구자석을 장착하여 자성처리한 화분에서 6개월간 생육시켜 나타난 변화를 관찰하였다. 자성처리화분에서의 생육은 스파티필름, 산호수 및 필레아에서 유의성 있는 생육증대를 유도하였으며 대부분의 식물종에서 조직 내 함수율을 증대시키는 것으로 나타났다. 스파티필름은 광합성률 또한 유의성 있게 증대되었으나 산호수 및 필레아의 경우 광합성률의 유의성 있는 증가가 나타나지 않았는데 이는 자성처리화분이 동화산물에 대한 정상적인 대사과정에서의 수요를 감소시킴으로써 생물량 축적에 보다 유리한 조건을 제공하는 것으로 해석된다. 그러나 홀리아페페의 경우 생육이나 광합성에 있어 별다른 차이가 유도되지 않았기 때문에 자성처리화분의 이와 같은 효과는 식물종에 따라 차이를 보일 것으로 생각된다. 실험에 사용된 대부분의 식물종에서 자성처리에 따른 엽 내 질소 및 엽록소 함량과 엽록소 a/b 비율에 유의성 있는 증가가 나타났다. 이와 같은 결과들은 식물종에 따른 제한은 있으나 적절한 자기장 처리를 통해 환경변화에 대한 관엽식물의 잠재적 적응능력을 높이고 실내 환경개선을 위한 실내식물의 활용도를 증대시킬 수 있는 가능성을 제시한다.

• 한국소음진동공학회논문집
• /
• 제18권10호
• /
• pp.997-1005
• /
• 2008

Linear motor stage is a useful device in precision engineering field because of its simple power transmission mechanism and accurate positioning. Even though linear motor stage shows fine positioning accuracy along travel axis, geometric dependent errors which relay on machining and assembling accuracy should be addressed to increase total positioning performances. In this paper, we suggests a cost effective yaw error compensation servo-system which is mounted on platform of the stage and nullify travel position dependent yaw error. This paper also provides a method of designing a sliding mode control which is robust to existing friction disturbance and model uncertainties. The reachability condition of slinding mode control for the yaw error compensating servo-system has been established. From some experimental results by using an experimental set-up, the sliding mode control showed its effective in disturbance rejection and its performance was superior to conventional linear controls.

• 천문학회지
• /
• 제28권1호
• /
• pp.89-95
• /
• 1995

We examined a total of 166 images of $3.5{\mu}m\;H_3^+$ emission in the auroral regions of Jupiter observed with the Protocam on IRTF in 1991 and 1992, and found that 30 images contain a clearly isolated small emission patch in the vicinity of the northern auroral regions. Two different time sequences of the images show the small patches at the dusk limb in the range of System III longitudes from $270^{\circ}\;through\;0^{\circ}\;to\;90^{circ}$. The small patches in one sequence of the images, which were taken at 10 phase between $240^{\circ}\;and\;260^{\circ}$, may be related to the 10 flux tube, similarly suggested by Connerney et al. (1993). However, the small patches in the other sequence are separated from Io as much as $80^{\circ}$ in longitude. The positions of the small patches in both sequences are deviated equatorward from the 10 footprint oval by $5^{\circ}-8^{\circ}$ latitude in the longitudinal range of $270^{\circ}-360^{\circ}$. A significant modification is required in current Jovian magnetic field models near the Jupiter's surface if the small patches are produced at the foot of the 10 flux tube.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권3호
• /
• pp.101-106
• /
• 2003

The high temperature superconductor transformers gain interests from the industries. This paper described construction and test results of 10㎸A HTS transformer Three phase transformer with double pancake windings were constructed. To reduce the leakage magnetic field, secondary coil were placed between the two primary coils. BSCCO-2223 wire. silicon sheet steel core and FRP cryostats were used to construct the transformer. Three coils were stacked in one cryostat. Two double pancake coils were connected in series for the primary coil and one double pancake coil was used for the secondary coil. Total number of turns of the primary winding and the secondary winding were 112turns and 98urns, respectively, The rated voltages of each winding were 440/220V. The rated currents of each winding were 13.1/26.2A. After the tests of basic properties of the three phase HTS transformer using no-load test, short-circuit test and full-load test, continuous operation of 100 hours with pure resistive load has been carried out. Test results proved over-load capability and reliability of the HTS transformer.

• 디지털산업정보학회논문지
• /
• 제13권3호
• /
• pp.11-17
• /
• 2017

The aerial support air sculptures currently exhibited in indoor spaces are similar to simple ad balloons, using multiple rope strands. Users now want more advanced unfixed sculptures, and hope these will develop into buoyant sculptures that can maintain the attitudes that users want on their own. This study investigated an attitude control system for unfixed levitation sculptures that can levitate with no rope and continuously maintain a certain attitude at a height specified by the user. To facilitate levitation, the exterior part of the sculpture was made of lightweight fibers, and the interior part was filled with helium gas. The controller was composed of a microprocessor of the dsPIC30F line from microchip, gyro, acceleration, and earth magnetic field sensors, and a highly efficient brushless DC (BLDC) electric motor. The attitude and position control system requires scheduling considering the trajectories of the sculpture and the control system, because the roles of the overall components are more important than those of a single controller. Furthermore, the system was designed like a fusion system that is expanded and controlled as a total controller, because it is interconnected with various sensors. The attitude control system of buoyant sculptures was implemented in this study, such that it can actively cope with the position, direction, stopping, and time aspects. The system performance was then evaluated.

• 천문학회지
• /
• 제50권4호
• /
• pp.105-109
• /
• 2017

The well-known solar cycle controls almost the entire appearance of the solar photosphere. We therefore presume that the continuous emission of visible light from the solar surface follows the solar cyclic variation. In this study, we examine the solar cyclic variation of photospheric brightness in the visible range using solar images taken by the Solar and Heliospheric Observatory (SOHO)/Michelson Doppler Imager (MDI). The photospheric brightness in the visible range is quantified via the relative intensity acquired from in the raw solar images. In contrast to total solar irradiance, the relative intensity is out of phase with the solar cycle. During the solar minimum of solar cycles 23-24, the relative intensity shows enhanced heliolatitudinal asymmetry due to a positive asymmetry of the sunspot number. This result can be explained by the strength of the solar magnetic field that controls the strength of convection, implying that the emission in the visible range is controlled by the strength of convection. This agrees with the photospheric brightness increasing during a period of long spotless days.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.428-438
• /
• 2016

This paper shows the design of the 100 kW IPMSG for small hydraulic power generator. The high-efficient generator, method of the dual layer interior permanent magnet was studied to improve the method of the single layer interior permanent magnet, which is mostly used. Analysis of magnet arrangement and cogging torque was done by FEM. According to structure analysis of dual layer interior permanent magnet, the amount of usage of the permanent magnet was reduced and cogging torque was decreased as well. With these successful results, the high-efficient generator design was accomplished. Based on the results of the structure analysis, the test product was designed and manufactured. And the design values and performance outputs were compared and verified with success. Also, the economic feasibility was conducted based on the electric power generated from the test product installed at the site. By the B/C analysis, in case that only SMP was analyzed, B/C ratio was 1.24 at the discount ratio of 5.5%, which considered to be economically feasible. The study is expected to be used for the application of developing large scale high-efficient interior permanent magnet synchronous generator.

• Journal of Radiation Protection and Research
• /
• 제36권3호
• /
• pp.107-118
• /
• 2011

Conventional (SRS) and fractionated (FSRS) stereotactic radiosurgery necessarily require stringent overall target point accuracy and precision. We determine three-dimensional intracranial target point deviations (TPDs) in a whole treatment procedure using magnetic resonance image (MRI)-based polymer-gel dosimetry, and suggest a technique for overall system tests. TPDs were measured using a custom-made head phantom and gel dosimetry. We calculated TPDs using a treatment planning system. Then, we compared TPDs using mid bi-plane and three-dimensional volume methods with spherical and elliptical targets to determine their inherent analysis errors; finally, we analyzed regional TPDs using the latter method. Average and maximum additive errors for ellipses were 0.62 and 0.69 mm, respectively. Total displacements were 0.92 ${\pm}$ 0.25 and 0.77 ${\pm}$ 0.15 mm for virtual SRS and FSRS, respectively. Average TPDtotal at peripheral regions was greater than that at central regions for both. Overall system accuracy was similar to that reported previously. Our technique could be used as an overall system accuracy test that considers the real radiation field shape.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권3호
• /
• pp.31-34
• /
• 2009

An HTS power cable is generally composed of 2 layers for conducting and 1 layer for shielding. For the analysis of AC loss of an HTS power cable, 2-dimensional magnetic field analysis is carried out. The magnetization loss in HTS cable core was calculated, and the transport current loss was obtained from the monoblock equation and the elliptical Norris Equation. And the total AC loss of the cable was expected by the sum of magnetization loss and transport current loss. The variation of ac loss with respect to the gap and uncertain factor between the superconducting tapes was investigated, and the ac loss of 22.9kV/50MVA high-Tc superconducting power cable was calculated. These results well agree with those of experiment.