• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.433-436
• /
• 2018

A total internal reflection (TIR) linear lens of size $190(W){\times}5(D){\times}2.1(H)mm^3$ has a directivity of $25^{\circ}$ and was made of a polydimethysiloxane (PDMS) silicone resin with a refractive index of 1.4 and a transmittance of 93% at 365 nm UV wavelength. A light source with a size of $190{\times}25.5mm^2$ was fabricated by installing a TIR linear lens on a chip on board (COB) type LED module mounted with a $1.1{\times}1.1mm^2$ size UV LED. The optical characteristics of the light source showed a maximum irradiation density of $3,840mW/cm^2$ at a working distance of 5 mm and a high uniformity of 91.6% over a $150{\times}25mm^2$ irradiation area. The thermal characteristics of the light source were measured at a supply current of 500 mA. The saturation temperature was reached after 30 min of operation, and measured to be $95^{\circ}C$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.26-35
• /
• 2007

We characterized the properties of the fabricated filter with the total internal reflection mirror (TIR) in the rectangular ring resonator and very small multimode interference (MMI) couplers on an InP material platform for photonic integrated circuits. Coupling power in and out of a resonator is increased by using an optimum MMI length of 110 ${\mu}m$ and a width of 9 ${\mu}m$, respectively. The semiconductor optical amplifier with the length of 120 ${\mu}m$ is integrated in the resonator to compensate the loss of the internal waveguide and the TIR mirror. A free spectral range of approximately 2 nm (244 GHz) is observed with an on-off ratio of 13 dB. The curve fitting also yields the power coupled per pass as 42%. To reach critical coupling at this coupling level would require a round trip loss of about 2.4 dB.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.46-54
• /
• 2007

We have fabricated and characterized MMI (Multimode Interference) coupled ring resonator with the total internal reflection mirrors and the semiconductor optical amplifier for the integration of the WDM (Wavelength Division Multiplexing) system. The TIR (Total Internal Reflection) mirrors were fabricated by self-aligned process and had losses of about 0.71 dB per mirror. Coupling in and out of a resonator was achieved using the extremely small MMI couplers. The MMI length and width used in the experiment were $119{\mu}m$ and $9{\mu}m$, respectively. The resulting FSR (Free Spectral Range) and on-off ratio were approximately 1.333 nm (162 GHz) and 13 dB, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.811-812
• /
• 2010

• Electronics and Telecommunications Trends
• /
• v.10 no.1 s.35
• /
• pp.113-122
• /
• 1995

현재 발표된 공간 광스위치 구조들은 전자 스위치 및 전자 통신 분야에서 많이 이용된 Clos, Benes, Banyan, omega, shuffle network 등을 directional coupler switch, TIR(total internal reflection) switch, cross X switch 등 여러가지 단위 광스위치를 이용하여 고안한 것으로 서로 다른 장단점을 갖고 있다. 따라서 4 X 4나 8 X 8, 또는 그 이상의 확장된 광스위치를 제작하기 위해서는 이러한 기존 구조에 대한 조사 및 분석이 선행되어야 한다. 본 논문은 현재 개발되어 발표된 광스위치의 구조들을 조사하여 특성을 비교하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.4
• /
• pp.267-271
• /
• 2018

A high directivity TIR (total internal reflection) lens in the UV-A region was designed using a silicone resin, and a UV light source module with a maximum irradiation density of $150mW/cm^2$ was fabricated. The beam angle of the TIR lens was designed to be $8.04^{\circ}$ and the maximum diameter of the TIR lens was Ø13.5. A silicone resin having a UV transmittance of 93% and a refractive index of 1.4 at a wavelength of 365 nm was used, and the lens was manufactured using an aluminum mold, from which silicone could be easily released. The module was fabricated in a metal printed circuit board of COB (chip on board) type using a $0.75{\times}0.75mm^2$ UV chip. A jig was used to adjust the focal length between lens and chip and to fix the position of the lens. The optical characteristics such as illumination distributions of the lens and module were designed using 'LightTools' optical simulation software. The heat dissipation system was designed to use a forced-air cooling method using a heat-sink and fan.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.793-798
• /
• 2009

In this paper, the simulation and optimization of SRH (Surface Relief Hologram) masks for printing LCD gate patterns using TIR (Total Internal Reflection) holographic lithography was investigated. A simulation and optimization algorithm based on SDTA (Scalar Diffraction Theory Analysis) method was developed. The accuracy of the algorithm was compared to that of the RCWA (Rigorous Coupled Wave Analysis) method for estimating the Fresnel diffraction pattern of Cr amplitude masks for the given system geometry. In addition, the results from the optimization algorithm were validated experimentally. It was found that one to the most important conditions for the fabrication of SRH masks is to avoid nonlinear shape distortions of the resulting grating. These distortions can be avoided by designing SRH masks with recorded gratings having small aspect ratios of width versus depth. The optimum gap size between the Cr and SRH masks was found using the optimization algorithm. A printed LCD gate pattern with a minimum line width of $1.5{\mu}m$ exposed using the optimized SRH mask was experimentally demonstrated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.80-80
• /
• 2008

바이오 센서 응용 연구에 많이 사용되는 금(Au) 나노 입자를 이용한 국소 표면 플라즈몬 공명(Localized Surface Plasmon Resonance, LSPR)에 의한 산란광을 검출하는데 주로 이용되는 암시야(dark field) 현미경 검출 방식에 관한 전산모사를 통하여 입사광의 입사 방식에 따른 산란광 세기를 정량적으로 분석하였다. 전산모사 기법으로는 국소 표면 플라즈몬 공명의 동역학적인 현상을 모사할 수 있는 유한차분시간영역(Finite Difference Time Domain, FDTD) 기법을 이용하였는데, 이러한 기법이 암시야 현미경 전산 모사에 유효함을 우선적으로 검증하였다. 암시야 현미경 검출 방식의 모사에서 입사 광원의 반사 입사 방식과 투과 입사 방식을 비교하였고, 각각의 방식에 서 입사광의 입사각에 따른 산랑광 세기를 계산하였다. 이러한 전산모사를 통하여 프리즘을 통한 내부 전반사(Total Internal Reflection, TIR) 방식에서 입사 광원의 임계각 근처에서 많이 발생하는 에바네슨트 장(evanescent field)을 결합하는 경우 산란광 세기가 증가함을 관찰하였고, 이러한 세기의 변화를 프레넬(Fresnel) 방정식에 의해 계산된 에바네슨트 장의 세기 분포와 비교 분석하였다.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.739-744
• /
• 2016

We have designed a new TIR(Total Internal Reflection) structure for generating an LED lens which can produce a rectangular beam with small divergence angle in two perpendicular directions for an optical guidance system. The lens can control the divergence angle in the horizontal direction to be a small value of about $8^{\circ}$ with a $1mm{\times}1mm$ LED source, also in the vertical direction it can be about $7^{\circ}$, with optical collection efficiency higher than 0.83. After the lens is manufactured, the work demonstrates that the lens is suitable for an optical guidance system.

• Current Optics and Photonics
• /
• v.7 no.5
• /
• pp.496-503
• /
• 2023

We present a detailed analysis of the light extraction efficiency (LEE) of a core-shell nanorod light emitting diode (LED) using finite-difference time-domain (FDTD) simulations. We found that the LEE has a deep dependence on source positions and polarization directions based on the calculated LEE results for every x and z position inside the core-shell nanorod structure. The LEEs are different for the upper part (pyramid) and the lower part (sidewall) of the core-shell nanorod owing to total internal reflection (TIR) and the generated optical modes in the structure. As a result, the LEE of sidewall is much larger than that of pyramid. The averaged LEE of the core-shell nanorod LED is also investigated with variable p-GaN thickness, n-GaN thickness, and height for the design guidelines for the optimized LEE of core-shell nanorod LEDs.