• 제목/요약/키워드: total hardness

검색결과 1,246건 처리시간 0.035초

구상흑연주철의 기계적 성질및 피로특성에 관한 연구 (A study on Mechanical and Fatigue Properties of Spheroidal Graphite Cast Iron)

  • 박노광;김창주;전의진
    • 한국기계연구소 소보
    • /
    • 통권9호
    • /
    • pp.83-93
    • /
    • 1982
  • The influence of different heat treatment conditions on microstructure, mechanical and fatigue properties of Spheroidal Graphite cast Iron with 0.4-0.6% Mn was investigated. 1) Maximum tensile strength was arrived by tempering at about $450^{\circ}C$after quenching. Tempering at higher than $600^{\circ}C$ was changed martensitic structure to ferritic structure and secondary graphites were precipitated. 2) The relationship between matrix hardness and total hardness of the specimens are as following. [HB]$T$=0.7[HB] [HB]$M$+35 Maximum tensile strength was arrived at the total hardness of HB400-450. 3) Endurance ratio decreases with increasing total hardness, and fatigue limits can be presumed from as following. $\sigmaf$=$\sigmat$

  • PDF

총탄산 농도에 따른 pH 및 경도가 견층 Sericin 용해에 미치는 영향 (Effects of pH and Hardness Resulted from Total Carbonate Concentration on Sericin Solubilities)

  • 남영락;채대석;성재천
    • 한국잠사곤충학회지
    • /
    • 제31권2호
    • /
    • pp.121-126
    • /
    • 1989
  • 1. 제사용수의 pH가 총탄산이 낮은 용수에서는 견층 Sericin 용해에 미치는 영향이 적었지만, 총탄산이 높은 용수에서는 견층 Sericin 용해에 미치는 영향이 컸다. 2. 총탄산이 낮은 용수에서는 견층처리전후의 pH변화가 컸지만 총탄산이 높은 용수에서는 그 변화가 적었다. 3. 무탄산 증류수로 표준경도용액을 만들어 견층을 처리한 결과 경도가 높고 낮은데 대한 Sericin 용액관계는 없었다.

  • PDF

충청남도 및 강원도 목장지역 목장용수의 춘하절간 위생화학적 변화 (Sanitary Chemical Conditions of Farmwaters in Choongcheongnam and Kangwon Province According to Spring and Summer)

  • 이강문;박석기;이용욱
    • 한국식품위생안전성학회지
    • /
    • 제9권4호
    • /
    • pp.229-235
    • /
    • 1994
  • It is very important to investigate the sanitary chemical conditions of farmwaters used for cattle breeding in the dairy farms. For this purpose we examined pH, KMnO4 consumption, total hardness, chloride, sulfate, NH3-N, NO3-N, fluoride, lead, iron, manganese, cadmium, copper, zinc and chrome in the farmwaters sampled 2 times(spring and summer)in Choongcheongnam and Kangwon Province. The pH of farmwaters in Choongcheongnam and Kangwon Province was 6.49$\pm$0.09, 6.70$\pm$0.06, total hardness 90.21$\pm$7.07, 64.53$\pm$6.38 mg/ι, consumption of KMnO4 4.13$\pm$0.62, 4.34$\pm$0.26mg/ι, NO3-N 6.51$\pm$0.55, 3.61$\pm$0.58 mg/ι, chloride ion 20.51$\pm$1.99, 5.41$\pm$1.36 mg/ι and sulfate ion 6.61$\pm$1.02, 7.28$\pm$1.30 mg/ι, respectively. But NH3-N was scarcely detected. Fluoride, iron, lead, cadmium, zinc, manganese and chrome were not detected from the tested farmwaters. There was high significance between each other in total hardness, NO3-N, chloride ion and sulfate ion. There was regional and seasonal significance in only NO3-N but only regional significance in total hardness and chloride ion.

  • PDF

경기지역 목장수의 위생화학적 조사연구 (Hygienic Chemical Conditions of Farm Waters in Kyunggi Province)

  • 박석기;윤중섭;김은정;임봉택;이용욱
    • 한국환경보건학회지
    • /
    • 제19권3호
    • /
    • pp.22-28
    • /
    • 1993
  • In order to investigate the hygienic chemical conditions of farm waters used as the potable and cleaning water for cow, we examined the pH, turbidity, KMnO$_4$ consumption, total hardness, chlorine, sulfate, NH$_3$-N, NO$_3$-N, lead, maganese, copper, zinc, fluoride and chrome for 78 farm waters around Kyunggi Province. Of 78 farm waters tested, average pH was 6.70+_0.06, turbidity 0.724 $\pm$ 0.081, KMnO$_4$ consumption 4.200 $\pm$ 0.256 mg/l, total hardness 107.46 $\pm$ 6.90 mg/l, NH$_3$-N 0.043 $\pm$ 0.037 mg/l, NO$_3$-N 8.096 $\pm$ 0.652 mg/l, chlorine 21.414 $\pm$ 2.187 mg/l, sulfate 12.737 $\pm$ 1.511 mg/l, lead 0.076 $\pm$ 0.001 mg/l, manganese 0.029 $\pm$ 0.004 mg/l, copper 0.018 $\pm$ 0.002 mg/l, zinc 0.055 $\pm$ 0.005 mg/l, chrome 0.048 $\pm$ 0.002 mg/l and fluorine 0.011 $\pm$ 0.001 mg/l. According to the geological characteristics, the concentrations of total hardness, NO$_3$-N, pH and chlorine in farm waters of Hwasung gun were higher than those in Yangpyung and Kwangju gun. In hygienic chemical items tested, there were high significanc among NO$_3$-N, total hardness, sulfate and chlorine. KMnO$_4$ consumption was significant with NH$_3$-N, sulfate and pH. But in heavy metals, there were significance between lead and copper, copper and chrome, and copper and fluorine.

  • PDF

Physical and Chemical Management Practices for Improving Water Quality in Channel Catfish Ictalurus punctatus Aquaculture

  • Seo, Jin-Won
    • 한국양식학회지
    • /
    • 제15권1호
    • /
    • pp.49-60
    • /
    • 2002
  • Research on practices for improving water quality in channel catfish Ictalurus punctatus ponds was conducted at the Auburn University Fisheries Research Station, Auburn, Alabama, in 1998 and 1999. The objective of this two-year study was to determine better management practices to enhance water quality and improve production efficiency. In the first year, oxidation of bottom soil by drying, tilling, and applying sodium nitrate was performed (dry-till and dry-till with sodium nitrate treatments). The second year, based on the results obtained during the first year, precipitation of phosphorus (P) from water by applying gypsum was compared to the dry-till treatment (dry-till and dry-till with gypsum treatments). Control ponds were not subjected to bottom drying, tilling, sodium nitrate, or gypsum treatment. Channel catfish fingerings were stocked at 15,000/ha. In the first year, water in ponds from dry-till and dry-till with sodium nitrate treatments had lower concentrations (P < 0.01) of soluble reactive P, nitrate ($NO_{3} ^{-}) and nitrite ($NO_{2} ^{-}) nitrogen (N), total ammonia ($NH_3$) nitrogen, total suspended solids and turbidity, and higher values of pH, Secchi disk visibility, total alkalinity, total hardness, and calcium ($Ca^{2+}) hardness than water in control ponds. Ponds of the dry-till treatment also had lower concentrations (P < 0.01) of total P and total N than control ponds. Total fish production and survival rate did not differ among the treatments (P > 0.05). The findings suggested that drying and tiling pond bosoms between crops could achieve water quality improvement. Applying sodium nitrate to dry, tilled pond bosoms did not provide water quality improvement. In the second year, the treatment with the best results from the first year, dry-till, was compared with a dry-till with gypsum treatment. Enough gypsum was applied to give a total hardness of about 200 mg/L, and gypsum was reapplied as needed to maintain the hardness. Compared to the control, dry-till and dry-till with gypsum treatments had lower concentrations (P < 0.01) of total and soluble reactive P, total N, and total $NH_3$-N, and higher concentrations (P < 0.01) of dissolved oxygen. Ponds of the duty-till with gypsum treatment also had lower concentrations (P < 0.01) of chlorophyll $\alpha$, chemical oxygen demand, and total alkalinity than the control. Total fish production and survival rate did not differ (P > 0.05) among the treatments. These findings suggest that drying and tilling pond bosoms between crops and treating low hardness waters with gypsum could achieve water Quality improvement.

초고압 처리가 배추김치의 품질특성에 미치는 영향 (Effect of High Hydrostatic Pressure on the Quality of Chinese Cabbage Kimchi)

  • 김동원;박석준;박지용
    • 한국식품과학회지
    • /
    • 제33권5호
    • /
    • pp.545-550
    • /
    • 2001
  • Effects of high hydrostatic pressure on pH, titratable acidity, color, hardness and microorganisms of Chinese Cabbage Kimchi were investigated. Kimchi was pressurized at $200{\sim}600$ MPa for 5 min. There were no significant differences in color and hardness between control and pressurized Kimchi (p>0.05). Total aerobes and lactic acid bacteria were effectively inactivated by high hydrostatic pressure above 400 MPa. Changes in pH, titratable acidity, color, hardness and microbial counts for 4 weeks storage of Kimchi were investigated Kimchi was pressurized at 400 MPa for 5 min and stored at $4^{\circ}C$. The pH of control decreased to 3.94 but pressurized Kimchi maintained its initial pH value throughout the storage. The color of control showed significantly low values compared with pressureized Kimchi (p<0.05), but hardness was not significantly changed (p>0.05). Total aerobes and lactic acid bacteria in the control were reduced from the initial value of $10^8{\sim}10^9$ CFU/mL to $10^6$CFU/mL after 4 weeks storage. Whereas microbial counts in pressurized Kimchi was maintained about $10^3{\sim}10^4$ CFU/mL during storage.

  • PDF

제사용수의 수질이 견층 세리신(Sericin) 용해에 미치는 영향 (제2보) (Property of Filature Water against the Solubility of Cocoon Layer Sericin Seoul National Silk Conditioning House)

  • 김병호;원성희
    • 한국잠사곤충학회지
    • /
    • 제15권2호
    • /
    • pp.45-53
    • /
    • 1973
  • 1. 용수의 M-알카리도가 높을수록 견층 sericin의 용해도는 급격히 증가 하였다. 2. 처리후의 시수 조사결과 M-알카리도 25p.p.m. 이상애서 산도는 완전히 중화되었다. 3. 시수의 M-알카리도가 상승함에 따라 처리후의 M-알카리도도 증가 하였다. 즉 견층을 처리한 시수의 M-알카리도가 높을수록 견층내의 M-알카리도 용출량도 증가하는 경향이 있었다. 4. 총경도는 시수의 M-알카리도가 증가 하는데 따라 감소하는 경향을 나타 내었다. .5. 用水의 산도가 높을수록 견층 sericin의 용해도는 현저히 감소되는 경향을 나타내었다. 6. 공시견 처리후의 수질변화를 보면 시수의 산도가 증가함에 따라 처리후 시수의 산도와 경도도 현저히 상승하는 반면 M-알카리도는 시수의 산도 20~40p.p.m. 에서 완전 중화되어 40p.p.m. 이상의 시수에서는 처리후 M-알카리도를 발견할 수 없었다. 7. 용수율의 철분 함유량이 증가하는데 따라 견층 sericin 용해도는 서서히 감소되는 경향이 있었다. 또한 망강에서는 용수중의 망강이 증가하는데 따라 견층 sericin 용해도는 다소 감소 하였으나 그 경향은 매우 완만하였다. 8. 견층 처리후의 수질변화를 보면 산도 M-알카리도 및 총경도가 상당량 견층에서 용출된 것을 볼 수 있었으나 이것은 시수의 pH 및 처리온도에 의한 것으로 보여지며 철분 함유량과는 아무런 관계도 인정할 수 없었다. 또한 망강에서는 시험후 수질변화를 조사한 결과 시수의 망강 함유량이 증가 하는데 따라 처리후의 M-알카리도는 감소 하였으나 산도 및 총경도는 증가되는 경향을 볼 수 있었다. 9. M-알카리도와 총경도를 변화하여 시험을 행한 결과 sericin 용해량이 증대되었다. 10. pH 및 총경도를 고정하고 M-알카리도 만을 변화시킨 경우 M-알카리도가 증가할 수록 sericin 용해도도 증대 되었다. 11. pH 총경도 및 M-알카리도를 고정하고 산도를 변화하여 시험한 결과 sericin 용해가 상당히 억제 되었다. 12. pH(6.8), M-알카리도를 고정하고 총경도만을 변화시킨 경우 sericin의 용해가 상당히 억제 되었다. 13. 각각의 수질 항목별로 sericin 용해에 미치는 작용면을 기본으로 분류하고 다시 "용해력증대" "용해력 보통" "용해력감소"의 구로 복합수질을 조제하여 시험 용해력 증대의 구는 용해력 감소의 구에 비하여 약 2.2%의 sericin 용해가 증대 되었으며 용해력 보통의 구에 있어 sericin 용해량은 2.4~2.9% 정도였다. 14. 4항 및 5항의 시험결과 견층 sericin 변성에 가장 크게 영향을 미치는 제사용수의 성분은 pH, M-알카리도, 산도 및 총경처이므로 앞으로 이상의 4개 항목을 기본으로 한 제사시험을 행하고 이 결과에 따라 최적의 제사용수 수질 조건을 설정코저 한다. 15. 동일 시수를 가지고 견층을 반복처리 하는데 따라 시수내의 완충력이 증가하여 견층 sericin의 용해량은 감소하는 경향이 있었다.견층 sericin의 용해량은 감소하는 경향이 있었다.

  • PDF

한국인(韓國人)의 중(中)·측절치(側切齒) 경조직(硬組織) 미소경도(微小硬度)에 관(關)한 연구(硏究) (STUDIES ON THE MICROHARDNESS OF CENTRAL AND LATERAL INCISORS OF THE KOREAN)

  • 정재규
    • Restorative Dentistry and Endodontics
    • /
    • 제2권1호
    • /
    • pp.38-49
    • /
    • 1976
  • Central and lateral incisors of 20, 40 and 60 age groups were bisected pararelly to long axis and middle portion of mesio-distal of teeth. And author measured the hardness of various areas in enamel and dentin with vickers hardness tester. Measured levels were divided into the labio-middle portion, middle portion of incisal edge and linguo-middle portion in enamel and dentin of all age groups. The results were as follows; 1) Total average hardness of enamel for 20, 40 and 60 age groups were respectively Hv. 366.5${\pm}$5.75, Hv. 372.9${\pm}$8.16 and Hv. 389.8${\pm}$10.27. 2) Total average hardness of dentin for 20, 40 and 60 age groups were respectively Hv. 51.0${\pm}$2.14, Hv. 54.0${\pm}$1.87 and Hv. 55.3${\pm}$2.23. 3) Total microhardness values in enamel and dentin of 60 age group was highered than 20 and 40 age groups. 4) The hardness values of enamel and dentin in all age groups were detected lower value on the middle portion of incisal edge than the labio-middle portion and linguo-middle portion. 5) Microhardness values of enamel was highered gradually from the dentinoenamel junction to the outer surface and it lowered at the outermost surface in all age groups. The microhardness values of dentin were the highest values at 600${\mu}$ from dentino-enamel junction and the lowest values at near the pulp chamber in all age groups.

  • PDF

構造용高炭素鋼材 의 高溫 低 사이클 피勞擧動 에 關한 硏究 (A Study on Low-Cycle Fatigue Behavior at Elevated Temperature of High Carbon Steel Used For Structural Purpose)

  • 옹장우;김재훈
    • 대한기계학회논문집
    • /
    • 제6권2호
    • /
    • pp.101-106
    • /
    • 1982
  • This study was undertaken to determine tensile properties and low-cycle fatigue behavior of 0.6%C high carbon steel used of structural purposes at temperatures up to 500.deg.C. In the low-cycle fatigue test the upper limit was decided by elongation(i.e. the total strain range), while the lower limit was defined by the load (i.e. zero load). The following results were obtained. Both, the ultimate tensile strength and low-cycle fatigue resistance attain the maximum values near 250.deg.C. Above this temperature the values decrease rapidly as the temperature increases. The low-cycle fatigue resistance decreases whenever there is an increase of the total strain range. Because the hardness of cycle fatigued specimen correlates cyclic hardening and cyclic softening, therefore the hardness of cycle fatigued specimen is smaller than that of the nonfatigued specimen at room temperature and 500.deg.C but much larger than the hardness of the nonfatigued specimen near 250.deg.C.

울산지역의 지하수 수질에 관한 통계학적 연구

  • 양운진
    • 한국환경과학회지
    • /
    • 제7권4호
    • /
    • pp.461-466
    • /
    • 1998
  • One hundred and thirty two ground water samples from the Usan area were divided into urban and non-urban groupings and were assessed between 1993 and 1996. The results of statistical analysis were as follows: There were significant differences between the two groupings in the average value of the following water quality parameters: total hardness, nitrate , pH, iron, ammonia and chloride ion in the order of Z-score . Because total hardness, nitrate, and pH were also significant in ANOVA test, these three parameters can be regarded as the most sensitive parameters of artirial pollutants. By the comprehensive com- parison of Ulsan water Quality to that of Kangwon-do, all of the major parameters(pH, KMnO4 consumption, sulfate, chloride and hardness except nitrated were confirmed as being significantly Increased levels.

  • PDF