• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.1-9
• /
• 2001

This study was carried out to investigate the microbial characteristics of the urban air pollution in the subway stations, streets, department stores, wholesale markets, underground shopping centers, buildings, parks, houses and apartments in the Seoul and the suburbs area. Total cell count, total mold count and the presence of opportunistic pathogens(Streptococcus pneumoniae, Klebsiella pneumoniae, Aspergillus spp., Penicillium spp.) were evaluated determine the microbial air quality. Total cell count and mold count of indoor air in the houses and apartments were 2.9$\times$10$^2$-6.3$\times$10$^2$cfu/㎥ and 60-1.8$\times$10$^2$cfu/㎥, respectively, and the department stores and wholesale markets had much lower cell count than the houses and apartments. Ground level of commercial stations were 2.6 fold higher than the general subway stations, and Apergillus spp. and Penicillium spp. which could cause the bronchus and lung diseases were detected 17 sampling site out of 45. Dust were collected from the commercial facilities and houses, and total cell and mold count of the dust were 4.3$\times$10$^3$-1.7$\times$10$^{6}$ cfu/g and 2.3$\times$10$^3$-6.5 $\times$10$^4$cfu/g, respectively. Therefore the dust might be one of the main reservoir of microorganims.

• Journal of Environmental Science International
• /
• v.2 no.4
• /
• pp.311-316
• /
• 1993

Methane production from grain dust was studied using a 3 L laboratory-scale anaerobic plug flow digester. The digester was operated at; temperature of 35, 45, and 55$^{\circ}C$; hydraulic retention time(HRT) of 6 and 12 days; and influent concentration($S_o$) of 7.8 and 9.0 % total solids(%TS). With ten different operation conditions, this study showed the significant effects of temperature, hydraulic retention time, and influent concentration on methane production. The highest methane-production rate achieved was 1.903 (L methane) /(L digester)(day) at 55$^{\circ}C$, 6 days HRT, and $S_0$ of 7.8 %TS. A total of 3.767 L of biogas per day with a methane content of 50.57 % was obtained from this condition. The ultimate methane yield($B_0$) was found to be a function of temperature and influent concentration, and was described as : $B_0$ = 0.02907T-0.1263-0.00297(T-10)(%TS), where TS is the total solids in the liquid effluent, and T is temperature($^{\circ}C$). Our results showed that thermophilic condition is better than mesophilic for grain dust stabilization in an anaerobic plug flow digester.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.4
• /
• pp.339-343
• /
• 2017

Masks are a portable functional product for daily use. They can protect user health by filtering harmful fine particles in the air. In the past decade, there have been approximately 10 yellow dust incidences per year, amounting to a total duration of 20 days, and they continue to increase year after year. In addition, the frequency of yellow dust incidences in Korea has increased by more than four times compared to levels from the 1970s. Statistical reports indicate that annual damages caused by yellow dust amount to more than six trillion KRW. This study developed a zero-fog multi-layer mask with a collection efficiency and yellow dust and particulate matter filtration areas that are at least thrice as effective as existing masks. The new mask also reduces pressure drag by half.

• Journal of Korean Public Health Nursing
• /
• v.12 no.2
• /
• pp.136-148
• /
• 1998

This study was conducted to provide basic knowledge of effective environmental control of patients with allergic rhinitis during the period of July to December 1995. The subjects were consisted of 29 patients with allergic rhinitis. Each patient of nasal symptom scores assessed and dust samples drowned from their bedrooms twice for 1 month interval. The data. 58 samples were analyzed by using ANOVA. t-test and stepwise multiple regression. The results were as follows 1. Out of a total 52 dust samples $(89.7\%)$ were isolated house mites. Total 815mites/0.5gm dust were collected and identified the most prevalent house mites was Pyroglypidae mite with $81.1\%$ 2. The amount of house dust mites in the group of bedding laundry with hot water was significantly lower than that those of with cold water. 3. The nasal symptoms of the patients in the group of bedding laundry with hot water was significantly less than that those of with cold water. and also those of using large size bedroom was significantly lower than that those of using small size one. The nasal symptoms of the patients was closely associated with the washing water temperature. bedroom size. bedroom temperature. type of bedclothes, and frequency of cleanig room.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.166-173
• /
• 2015

Objectives: The purpose of this study was to evaluate cobalt concentrations in airborne inhalable, total and respirable dust from manufacturing industries using cobalt. Methods: To compare cobalt concentrations, three types of dust samplers(a 37mm closed cassette sampler, Institute of Occupational Medicine(IOM) sampler, and Aluminum cyclone sampler) were used. The analysis of cobalt concentrations was conducted using AAs based on the NIOSH 7300 method. Results: The geometric mean of cobalt concentration in total dust was $1.47{\mu}g/m^3$, and the rate of excess of the Korean Occupational Exposure Limit(KOEL) was 10.0%. The geometric mean concentrations of cobalt in super alloy manufacturing industries were higher than those in plating industries, and molding operations showed higher exposure levels to cobalt than did other operations. Conclusions: The rate of cobalt concentration in inhalable dust from super alloy manufacturing industries exceeding the Workplace Exposure Limit(WEL) as recommended by the Health & Safety Executive(HSE) was 7.1%, which means proper work environmental management is required through wet work environments. Given that molding operations had higher cobalt concentrations, it is necessary to apply measures such as local exhaust for reducing airborne dust in cobalt manufacture industries.

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.3
• /
• pp.298-301
• /
• 2003

Objectives : There is an increasing concern for the social, economic, environmental and health effects of the Asian dust (Hwang-sa in Korean language) in Korea. In this study, we intended to indirectly determine ordinary people's perception about the Asian dust by analyzing the contents of newspaper articles dealing with it. Methods: By using article searching services in the internet websites of three newspaper companies, we collected newspaper articles dealing with the Asian dust during the period from January $1^{st}$ of 1998 to December $31^{st}$ of 2002. We classified the articles into four categories: those forecasting the occurrence of the Asian dust, those about measures to cope with it, those about its occurrence in the neighboring foreign countries, and those about its effects. In particular, we analyzed articles about the health effects of the Asian dust more distinctly. Results : A total of 1,225 articles dealing with the Asian dust were found during the 5 year period. The number of articles increased from 102 in 1998 to 518 in 2002, approximately a five-fold increase, The numbers of articles about health effects, environmental effects and economical effects were 191 (44%), 171 (41%) and 147 (34%), respectively. It was reported that various diseases such as respiratory diseases (87%), eye problems (69%), and skin diseases (12%) were associated with the Asian dust. Conclusion : The increasing concern for the negative effects of the Asian dust necessitates more studios about this field. As the effects of the Asian dust are various, the information on the major concern of ordinary people could help establish the research agendas and measures for the Asian dust.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.196-208
• /
• 1997

This study was performed to estimate quartz contents in the both bulk and airborne dust samples and to determine particle size distribution of airborne dust from the selected foundry operations. Total dust samples were collected by a 37mm cassette and respirable by a 10 mm nylon cyclone. Particle size distributions were determined by a Marple's 8-stage cascade impactor at the melting, molding, shakeout and finishing operations. The presence of elements in the dust samples were confirmed by the scanning electron microscopy equipped with the energy dispersive x-ray spectrometry. The quartz contents were estimated using the intensity of the absorption peak of quartz at 799 cm-l by the Fourie Transformed Infrared Spectroscopy (FTIR). The results were as follows: 1. The analysis of data from cascade Impactor showed bimodal distributions of particle size at the melting, molding and shakeout operations. Mass median aerodynamic diameters for the distributions determined by histogram were $0.48-1.65{\mu}m$ for small and $13.43-19.58{\mu}m$ for large modes. In the dust samples collected at the finishing operations, however, only a large mode of $18.89{\mu}m$ was found. 2. The percentages of total to respirable dust concentration calculated from the impactor data ranged from 42 % to 66 %. The average concentrations of respirable dust by cyclone were $0.85-1.28mg/m^3$ collected from the workers, and were $0.23-0.56mg/m^3$ from the areas surveyed. Dust concentrations of personal samples were statistically significantly higher than those of area samples. The highest dust concentration was obtained from the personal samples of the finishing operation. 3. The mean percentages of silicon and oxygen estimated by SEM-EDXA in the bulk samples ranged from 35.83 % to 36.02 % and from 39.93 %-41.64 %, respectively. 4. The average quartz contents estimated by FTIR in the respirable dust from personal samples ranged from 4.32 % to 5.36 % and 4.54 % to 4.70 % in the bulk samples. No statistical difference of quartz content was found between foundry operations. In this study, quartz content was quantified by FTIR. Although no statistically significant difference in quartz content between airborne and bulk, samples and between different foundry operations was found, it is recommended that quartz content in the individual sample of respirable dust be analyzed and the results be used either to select an applicable quartz limits or to calculate the exposure limit. Further studies, however, are needed to compare the results by FTIR and XRD since it is reported that the quartz content determined by FTIR is different from that by XRD.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.48.3-49
• /
• 2017

Interplanetary space of the solar system contains a large number of dust particles, referred to as Interplanetary Dust Particles (IDPs) cloud complex. They are observable through meteors and zodiacal lights. The relative contribution of possible sources to the IDPs cloud complex was an controversial topic, however, recent research (Yang & Ishiguro, 2015 and references therein) suggested a dominance of cometary origin. In this study, we numerically investigated the orbital evolution of cometary dust particles, with special concerns on different evolutionary tracks and its consequences according to initial orbits, size and particle shape. The effect of dust particle density and initial size-frequency distribution (SFD) were not decisive in total cloud complex mass and mass supply rate, when these physical quantities are confined by observed zodiacal light brightness and dust particle SFD at 1 au. We noticed that, if we assume the existence of fluffy aggregates discovered in the Earth's stratosphere and the coma of 67P/Churyumov-Gerasimenko, the required mass supply rate decreases significantly. We also found out that close encounters with planets (mostly Jupiter) are the dominating factor of the orbital evolution of dust particles, as the result, the lifetime of cometary dust particles are shorter than Poynting-Robertson lifetime (around 250 thousand years). As another consequence of severe close encounters, only a small fraction of cometary dust particles can be transferred into the orbit < 1 au. This effect is significant for large size particles of ${\beta}$ < 0.01. The exceptional cases are dust particles ejected from 2P/Encke and active asteroids. Because they rarely encounter with Jupiter, most dust particles ejected from those objects are governed by Poynting-Robertson effect and well transferred into the orbits of small semimajor axis. In consideration of the above effects, we directly estimated probability of mutual collisions between dust particles and concluded that mutual collisions in the IDPs cloud complex is mostly ignorable, except for the case of large sized particles from active asteroids.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.1
• /
• pp.25-31
• /
• 2002

This study attempts to elucidate the possibility of treating landfill leachate by steelers' dust/${H_2}{O_2}$ system in a well-mixed batch reactor. Experiments were conducted to investigate the effects of operating variables such as pH, dust and ${H_2}{O_2}$ dosages and ${H_2}{O_2}$ injection method on the treatment efficiency, Contaminant concentrations were identified by TOC (Total Organic Carbon) analyzer. Experimental observations showed the possibility of steelers' dust as a catalytic reagent in the ${H_2}{O_2}$/dust system. The batch experiments showed that the optimal $H_2O$$_2$ and dust dosage, 20g/L dust. 2,000mg/L ${H_2}{O_2}$ removed about 75% of initial TOC concentration (250mg/1) within 60 min. And the TOC removal in the ${H_2}{O_2}$/dust system effectively proceeded only within a limited pH range of 3-4. The stealers' dust-catalyzed oxidative treatment of landfill leachate was more efficient compared with the $FeSO_2$catalyzed system (Fenton oxidation) for the removal rate and the cost.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.4
• /
• pp.451-465
• /
• 2003

The major conversion processes of SO$_2$ to sulfate are reactions in gaseous, aqueous phase and on dust surface. Using the measurement data in Ganghwa, the background area of metropolitan Seoul Area, the relative contiribution of the conversion processes are estimated. Generally, aqueous cloud if the most important conversion path followed by dust surface, gas, and aqueous aerosol. Importance of conversion on dust surface increases for the dust storm period. The total conversion rate values over the metropolitan Seoul area are between 1.5 and 8.8$\times$10$^{-11}$ mole m$^{-3}$ air.