• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.38-48
• /
• 2020

The domestic AI speaker market is growing into a full-fledged early audience market beyond the innovative consumer market with 3 million domestic supply units at the end of 2018, but the reality is that for various reasons, we are not satisfied with the use. There are many previous papers on AI Speaker, but the majority of research so far tends to be biased towards the acceptance of the device's own performance. Many changes are being made, such as OTT providers trying to secure the market through collaboration with AI speaker providers. This study tried to identify the priorities for content services, which can be another major selection factor for AI speakers, excluding the factors of unsatisfactory technology. First, this study identified the priorities among AI speaker selection factors using AHP (Analytic Hierarchy Process), based on the AI speaker selection factors derived through literature research. The most important hierarchical factor are Concierge Service, Education Service, and Entertainment Service order in AI speaker selection, and the primary content among the individual factors was the one that ranked weather/temperature/fine dust (11.6%) and child caring content was in the second place (10.8%), and then music service was in the third place (9.8%). The three top priorities were derived from the items in the top tier 1, 2 and 3 priorities. Of the total 15 individual services, 6 sub-layers of Concierge Service (weather/temperature/fine dust, news, voice schedule notification) and Education Service (foreign language, toddler, reading books) were in the top 8, and two of the Entertainment Service Music service and movie service ranked third and sixth.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.444-454
• /
• 2016

This study was designed to examine the characteristics of sawdust and cocopeat bedding materials, including physicochemical properties (Exp. I) and on-farm trial (Exp. II). In Exp. I, the proportion of particle size was in the order of sawdust>cocopeat India>cocopeat Vietnam (p<0.05), and cocopeat contained higher proportion of small particles ($250{\mu}m$+below $250{\mu}m$) than sawdust, causing a dust production problem. Bulk density was cocopeat India>cocopeat Vietnam>sawdust (p<0.05), thus cocopeat treatments showed 4.4 times higher bedding cost than sawdust. The water absorption rates were 702.0% in cocopeat India, 678.3% in cocopeat Vietnam, and 444.0% in sawdust, showing cocopeat had approximately 1.5 times higher water absorption rate than sawdust. Moisture evaporation rates after 12 h of air blowing (2.00 m/s) were higher (p<0.05) in cocopeat Vietnam (80.4%) than sawdust (71.2%) and cocopeat India (72.8%). In vitro ammonia emissions were higher (p<0.05) in sawdust ($2.71mg/m^2/h$) than cocopeat India ($1.59mg/m^2/h$) and Vietnam ($1.22mg/m^2/h$), and total ammonia emissions were higher (p<0.05) in sawdust ($37.02mg/m^2$) than cocopeat India ($22.51mg/m^2$) and Vietnam ($13.60mg/m^2$). In Exp. II, an on-farm trial was conducted with 48 Hanwoo cattle in 16 pens using the same bedding materials as in Exp. I, with fan (blowing 2.00 m/s) and no fan treatments, and feed bunk side (FB) and water supply side (WS) within a pen (4.5 m, $width{\times}9.0m$, length). Beddings were replaced with fresh bedding materials when moisture concentrations were over 65%. No interactions among treatments were detected for moisture concentration and increment rates, and ammonia concentrations, but a significant effect was observed (p<0.01) for each of the treatments. Both concentrations and increment rate of moisture were higher (p<0.01) in the beddings without fan than with fan. Moisture concentrations and increment rate within a pen were also higher (p<0.01) in FB than WS. Thus, the whole no-fan-FB and sawdust-fan-FB were replaced with fresh bedding material between 4 to 5 experimental weeks. The ammonia concentrations and pH of beddings were not significantly different among treatments. Therefore, using cocopeat bedding with a blowing fan can extend twice the bedding utilization period, and WS within a pen showed twice the bedding-life compared to FB. Despite the outstanding characteristics of cocopeat compared with sawdust, using cocopeat as an alternative for sawdust bedding is not recommended for cattle management, considering it has 4.4 times higher bedding cost and a dust production problem.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.114-121
• /
• 2002

Alkali metal compounds existed in original coal or sorbents are exhausted as vapor or small particle at the outlet of combustor when operating PFBC power plant. These compounds can be removed with dust removal equipment, but total generation efficiency will be decreased because of lower operating temperature of dust removal equipment. Alkali metal contained in vapor phase is initially deposited onto turbine blade results in serious corrosion. The concentration of alkali vapor in the PFBC flue gas is 20∼40 ppm which is dependent on mineral characteristics and composition as well as operating condition of PFBC. However, the allowance limit of alkali metal vapor is assigned as less than 50 ppb for gas turbine when coal or oil is used as fuel. Therefore, alkali metal vapor in PFBC or IGCC process should be removed by solid sorbents to prevent corrosion of turbine blade and improve plant efficiency. In the present investigation, powder of Bauxite, Kaolinite and Limestone is used in the preparation of cylinder-type pellet which is inserted into the pressurized alkali removal reactor for the alkali absorption experiment. Experimental results showed that the alkali removal efficiency in the order of Bauxite, Kaolinite and Limestone. Alkali vapor removal efficiency is related with reaction temperature, porosity of pellet and alkali vapor concentration of flue gas.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.192-199
• /
• 1991

To manufacture a good organic fertilizer through rapid composting process, cow dung was mixed with bulking materials such as rice straws, shredded bark, wood chips, and saw dust. The mixing ratio of the cow dung and bulking material was two to one on volume basis and moisture content was adjusted to 60 to 70 percent, C/N ratio 25 to 30 and aeration forced with suction during the aerated pile fermentation. Aerated pile was established outdoors and curing pile was in vinylhouse and the experiment was conducted for 3 years from '88 to '90. After pilling, temperature in aerated pile was reached to the maximum level at 7 to 9 days and the temperatures of cow dung + shredded bark, cow dung + wood chips, and cow dung + rice straws were higher than that of cow dung, and cow dung + saw dust. Total carbon, and C/N ratio in aerated pile fermentation period were increased in the middle stage and then they were decreased with the process of days, and nutrient contents in curing pile period had the same tendency as in the aerated pile.

• Journal of Environmental Science International
• /
• v.25 no.8
• /
• pp.1065-1076
• /
• 2016

This study analyzes the $PM_{10}$ characteristics (particulate matter with aerodynamic diameter less than $10{\mu}m$), concentration, and emissions in eight large South Korean cities (Seoul, Incheon, Daejeon, Daegu, Gwangju, Ulsan, Busan, Jeju). The annual median of $PM_{10}$ concentration showed a decline of $0.02{\sim}1.97{\mu}g/m^3$ in the regions, except for Incheon, which recorded an annual $0.02{\mu}g/m^3$ increase. The monthly distribution levels were high in spring, winter, fall, and the summer, but were lower in summer for all regions except for Ulsan. These differences are thought to be due to the dust in spring and the cleaning effect of precipitation in summer. The variation in concentrations during the day (diurnal variation) showed that $PM_{10}$ levels were very high during the rush hour and that this was most extreme in the cities (10.00 and 18.00-21.00). The total annual $PM_{10}$ emissions analysis suggested that there had been a general decrease, except for Jeju. On-road mobile (OM) sources, which contributed a large proportion of the particulates in most regions, decreased, but fugitive dust (FD) sources increased in the remaining regions, except for Daegu. The correlation analysis between $PM_{10}$ concentrations and emissions showed that FD could be used as a valid, positive predictor of $PM_{10}$ emissions in Seoul (74.5% (p<0.05)), Dajeon (47.2% (p<0.05)), and Busan (59.1% (p<0.01)). Furthermore, industrial combustion (IC) was also a significant predictor in Incheon (61.7% (p<0.01)), and on-road mobile (OC) sources were a valid predictor in Daegu (24.8% (p<0.05)).

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.1
• /
• pp.1-6
• /
• 2004

Agricultural recycling of livestock wastes by composting has lots of beneficial effects on crop production and soil fertility. Most of composts are made from pig manure and water content controller such as saw dust, bark, rice hulls etc. by aerobic processing. But the insufficient supply of saw dust, bark etc. cause the indiscreet use of industrial waste having heavy metals and toxic synthetic chemicals. This research investigated the present quality status of organic by-product fertilizers, and suggested the way of quality interpretation under the statistical approaches based on median, mean and weighted average value. Since the data of one hundred of samples for heavy metal contents (Cd, Pb, Cu, and Cr) and OM/N showed extremely left-skewed distribution, the median was more useful than the mean in representing the characteristics of distribiition for each items. The weighted average value will be a useful index for the quality based on the total amount of producing.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.395-400
• /
• 2011

This study has been carried out in order to effectively manage three groups of unregulated hazardous organic substances (PCDD/DFs, PAHs, PCBs) in South Korea. The investigated substances have been analyzed according to the test methods for hazardous substances in specified wastes provided by the National Institute of Environmental Research, Korea. Total contents of the organic compounds have been determined for hazardous wastes from three major industrial categories (paint, iron removal, steelmaking), such as waste organic solvent, waste paint or dust. By investigating the waste samples for 7 PAHs using GC/MSD, Naphthalene has been detected (N.D~1631.33 mg/kg). The highest Naphthalene concentration, which exceeded the korean marine dumping waste standard, was found in waste organic solvents and waste paints. Although a content analysis of 7 PCB isomers has been conducted, none of these compounds was detected. The analysis of PCDD/DFs has revealed that all samples meet the criterion for low POP content defined in the technical guidelines developed under the Basel Convention. The PCDD/DFs content in dust samples deriving from 10 manufacturing processes (billet, bloom) was determined to be in the range of N.D~5.66 ng I-TEQ/g waste.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.431-446
• /
• 2018

In this study, chemical characteristics of $PM_{2.5}$ samples collected in an agricultural area in Nonsan of Korea were investigated focusing on of black carbon, 3 inorganic ions and 22 trace elements. It was found that the relative error and relative standard deviation of many trace elements fell below 10%, which indicates good analytical accuracy and precision. The mean values of $PM_{2.5}$ in an agricultural area were exceeded by new Korean air quality standard of March 2018. The concentration of $PM_{2.5}$ was well correlated with those of black carbon and ions. The concentrations of trace elements were in a wide range of seven orders of a magnitude. Based on these $PM_{2.5}$ data sets, a total of 6 sources were identified using PMF (Positive Matrix Factorization; secondary aerosol (34.4%), soil/road dust (20.1%), biomass burning (16.9%), incineration/fuel combustion (13.2%), vehicle exhaust(12.2%), sea-salt (3.17%). Results of our study indicate that it is very important to control illegal burning activities in agricultural area.

• Journal of agricultural medicine and community health
• /
• v.40 no.4
• /
• pp.240-249
• /
• 2015

Objectives: Farmers are known to be exposed to a variety of allergens related to the work environment. This study was conducted to determine the sensitization rates as well as South Korea that they are sensitized to certain allergens farmers through the skin prick test. Methods: By targeting a total of 1143 people living in the rural town of Gyeonggi Province, it was conducted a questionnaire containing demographic and occupational risk factors and underwent skin prick tests with 15 types of allergens(including positive and negative controls). Multivariable logistic regression analysis was used to analyze the association between occupational risk factors and skin prick test positivity. Results: Except for the 30 people whose result is invalid, positive rate of the skin prick test was 18.6% in 1,113 people. The species of house dust mite, Dermatophagoides pteronyssinus and Dermatophagoides farinae was the highest at 8.7% and 8.6%. After adjusted by age, gender, smoking and education level, odds ratio of flower plant farmers is 4.467(95% CI: 2.094-9.527) and fruit farmer is 2.275(95% CI: 1.096-4.721). In addition, the rate of sensitization to grass pollen mixture of the flower plant farmers is significantly higher(15.9%, p<0.001) than other allergens. Conclusions: Even farmers, the rate of sensitization to allergens related to the general environment, such as house dust mite is relatively dominant. However, given the presence of potential cross-reactivity between the allergens or distribution showed that the unique aspects of allergen sensitization in the flower growers, occupational cause is not be completely ruled out.

• Journal of the Korean earth science society
• /
• v.23 no.6
• /
• pp.514-525
• /
• 2002

The analysis of heavy metals associated with both PM2.5 and PM10 fraction of aerosols was made from a northeast region of Seoul during the spring period of 2001. The mean concentrations of fine (PM2.5), coarse (PM10-PM2.5), and PM10 fraction were observed as 49.3${\pm}$29.2, 50.5${\pm}$35.0, and 95.5${\pm}$46.1 ${\mu}g$/m$^3$, respectively during this study period. According to the results of enrichment factor (EF) analysis between different particle fractions, major elements (including Fe, Ca, Na, and K) were found to exhibit EF values of less than 10. However, heavy metal components (like Zn and Pb) showed very high EF values. Comparison of fine/coarse (F/C) concentration ratio showed that Zn, Cr, Pb, and Ni have higher ratio values than others. The metallic composition of particles was also compared on both absolute and relative terms. The results of our analysis showed an evidence that the increase in the total metallic contents is prominent during the spring period due mostly to the Asian Dust event.