• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.159-163
• /
• 1989

The various degradation phenomena, such as the evolution of gases, tan $\delta$, moisture content and total acid number in power transformer insulation oil, have been measured and analyzed. Mineral oil has been degraded at laboratory by the forced thermal stress of $60^{\circ}C$ and $90^{\circ}C$ respectively. Thermal aging oil has been degraded about 17, 34, 72 days. Also, we extracted insulation oil from working transformers. We measured gases dissolved in samples, tan $\delta$, moisture content, total acid number. Activation energy and resistivity is calculated from them. It is found that gases and tan $\delta$ increases as partial discharge and total acid number increases and that conductivity of the sample increases as activation energy increases.

• Journal of Korean Society on Water Environment
• /
• v.20 no.4
• /
• pp.376-381
• /
• 2004

The use of electron beam irradiation was investigated to disinfect total coliforms in the secondary sewage treatment effluent. Unchlorinated secondary effluent was irradiated at different dose of 0.2~1.0 kGy by 1 MeV, ELV-4 Model electron beam accelerator. It is interesting to note that a 100 % reduction in total coliforms and total colonies were achieved until a dose of approximately 0.8 kGy. Even at low dose of 0.2 kGy, the total coliforms and total colonies were successfully inactivated to the level of satisfying the new effluent discharge guideline. Besides disinfection of total coliforms, approximately a 50% removal in biochemical oxygen demand was pronounced at a dose of 0.2 kGy. More than 20 % removal in suspended solids and turbidity was also observed at a dose of 1.0 kGy. The application of electron beam irradiation appeared to be one of options to reuse sewage treatment effluent as agricultural or industrial water.

• Journal of Korean Academy of Nursing
• /
• v.30 no.2
• /
• pp.514-526
• /
• 2000

The active treatment phase in preparation for bone marrow transplantation(BMT) of che- motherapy regimen and total body irradiation (TBI) containing regimen requires considerable teaching. There have been researches that are related to treatment onto BMT patients and to psychological change during BMT process. However, it was hard to find researches focused on learning needs of patients undergoing BMT. The purpose of this study was to provide the basic data for effective educational program about BMT by investigating the learning needs in patients undergoing BMT. The subjects consisted of 90 BMT patients have been admitted to the department of BMT at three university hospitals. Data were obtained from October 1998 to March 1999 and analyzed by SAS program for unpaired t-test, ANOVA, Duncan test. The results were as follows : 1. Learning needs related to demographic characteristics was identified as below. That of male was higher than that of female. That of under age 29, unmarried, religious and university graduated group was higher than that of opposite group but it didn't show significant difference. Learning needs of group of patients who were employed was significantly higher then that of unemployed patients. 2. According to types of diagnosis, learning needs of myelodysplastic syndrome(MDS) patients was the higher than that of others, but admission frequency was the least. Learning needs of unrelated matched BMT(UBMT) patients was higher than that of autologous BMT patients. However, it didn't show significant difference. With regard to learning needs according to process of BMT, learning needs of Pre- BMT period or Post-BMT period was significantly higher than that of BMT day. 3. Learning needs related to BMT was relatively high (total mean: 3.11 of 4.0). The order of the mean score of leaning needs was shown as follows : Restricted activities after discharge, Relapse symptom, Complications of BMT, Kinds of available drugs at home. Therefore the learning needs that is related to life after discharge and to relapse and complications after BMT was high. 4. Learning needs related to radiation therapy was high (total mean: 3.35 of 4.0). The learning needs in radiation therapy items was the Skin care of radiation therapy and Purpose of radiation therapy. 5. Learning needs related to graft versus host disease(GVHD) therapy was high (total mean: 3.55 of 4.0). The highest learning needs in GVHD therapy items was the Preventive method GVHD. less admission frequency and UBMT patients. It is necessary that education for BMT patients should be focused on life after discharge and on relapse and complications after BMT. Especially education for allogeneic BMT patients should be emphasized on GVHD. For all of these, it is necessary to develop systematic and concrete educational program.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.5-24
• /
• 1984

There has been an immense need for elaborate studies on the complications and the neuological sequelae generated by acute carbon monoxide (CO) poisoning which is highly prevalent in Korea due to widespread adoption of the anthracite coal briquette as domestic fuel for heating and for cooking. For this epidemiological study, a total of 444 subjects who received hospital emergency care for acute CO poisoning during the period of March 1982 to February 1983 were randomly selected from the emergency patients's lists of 13 general hospitals in Seoul area. Informations on the neurological sequelae were elucidated by means of home visiting with prearranged questionnaire consisting questions and concise neurological examination. The findings obtained were summarized as follows; 1. The complications were found in 18% of the surveyed and acute decubitus was comprised 67.5% of the complications. 2. The total cumulative incidence of the neurological sequelae was 41.2 per 100 patients and the absolute incidence rate regardless of the duration after poisoning was 40.8%. 3. The incidence of the neurological sequelae was higher in the older age than in the younger and also higher in female than in male. Twice higher incidence was observed in the admitted patients than in the non-admitted patients and the incidence became higher in proportion to the duration of CO exposure, coma and admission. The poorer the consciousness level of patients found, at emergency room and at discharge, the higher the incidence. The incidence of the neurological sequelae by emergency care was higher in hyperbaric oxygen therapy group(51.9%) than in 100% $O_2$ group(38.0%) 4. A total of five variables significantly associated with the occurrence of the neurological sequelae were selected by the stepwise discriminant analysis. The variables were following course of emergency care, age, consciousness level at discharge, admission duration, and consciousness level at emergency room in their sequence of discriminant power. Eight variables were selected as those associated with the degree of the neurological sequelae through the stepwise multiple regression analysis. Of these variables, the acute decubitus alone explained 21.1% of the total variation ana all the eight variables could explain 36.5% of the same. The remaining seven variables listed in the order of their relative importance were: age, consciousness level at discharge, admission duration, coma duration and consciousness level at emergency room. 5. It was postulated that unexpectedly high incidence of the neurological sequelae of the CO poisoning in this epidemiological study was mainly due to the inadequate emergency care and the lack of efficient and sophisticated treatment measure. In the effort to minimize the incidence of grave neurological sequelae of acute CO poisoning, new guidelines for the emergency care and treatment should be pursued with efficient ways.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.321-335
• /
• 2023

Monitoring sediment loads in natural rivers is the key process in river engineering, but it is costly and dangerous. In practice, suspended loads are directly measured, and total loads, which is a summation of suspended loads and bed loads, are estimated. This study proposes a real-time sediment discharge monitoring system using the horizontal acoustic Doppler current profiler (H-ADCP) and support vector regression (SVR). The proposed system is comprised of the SVR model for suspended sediment concentration (SVR-SSC) and for total loads (SVR-Q_TL), respectively. SVR-SSC estimates SSC and SVR-Q_TL mimics the modified Einstein procedure. The grid search with K-fold cross validation (Grid-CV) and the recursive feature elimination (RFE) were employed to determine SVR's hyperparameters and input variables. The two SVR models showed reasonable cross-validation scores (R²) with 0.885 (SVR-SSC) and 0.860 (SVR-Q_TL). During the time-series sediment load monitoring period, we successfully detected various sediment transport phenomena in natural streams, such as hysteresis loops and sensitive sediment fluctuations. The newly proposed sediment monitoring system depends only on the gauged features by H-ADCP without additional assumptions in hydraulic variables (e.g., friction slope and suspended sediment size distribution). This method can be applied to any ADCP-installed discharge monitoring station economically and is expected to enhance temporal resolution in sediment monitoring.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.361-369
• /
• 2008

The purpose of this study is to make porous oxide film on the surfaces of pure Ti through anodic spark discharge in electrolytic solution containing calcium and phosphate ions, to improve osseointergration by treating fluoride agent. In addition, it is to evaluate the fluoride modified effect on the surface. Commercial pure Ti plate with $20{\times}10{\times}2mm$ and Ti wire with a diameter of 1.5mm and a total length of 15mm were used. After making titanium oxide films converted by anodic spark discharge, anodizing was performed. Fluoride was spreaded to titanium laboratory plate and maintained for 30 minutes after anodizing breakdown. Fluoride ion discharge amount was measured per 24 hours after dipping titanium plate into saline (10ml) and sustaining 90rpm in a pyrostat. Some plates and wires were dipped in Hanks solutions for a month to examine biocompatibility using SEM and XRD. $TiO_2$ film formed by anodic discharge technique showed great roughness and uniform pores which were $1{\sim}3{\mu}m$ in a diameter. Roughness of the films treated with anodic discharge after blasting were higher than the turned ones(P<0.05). Rapid surface activity was observed in the samples treated with $TiF_3$ agent, which immersed in Hanks solution for 30 days. Taking the results into consideration, the fluoride modified implant with anodic discharge demonstrates that it makes uniformly porous oxide film on the surface of implant and properly increase roughness for osseointegration. The implants will achieve greater bone integration after short healing time by improving surface activity.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.4
• /
• pp.271-282
• /
• 2011

The purpose of this study is to clarify the discharge patterns of Yongnup, Daeam-san. Many hydrographs were analyzed by the types of rising and falling stages, and the slope of those stages with the semi-log graph paper was a key point to distinguish the discharge patterns during rainstorms. The correlation between rainfall intensity and slopes of the second or third rising stage was higher than that between slopes of the first rising stage and rainfall intensity. Also, the coefficient of correlation between discharge decrement and the lapsed time from the peak to inflection point of hydrograph, during high water stages, was better than that during low water stages. The annual average discharge rate of Yongnup was 0.54 and the average direct runoff ratio was 0.14. The total discharge amount from Yongnup was about 410,000 tons for a water year, the monthly maximum amount emerged in September and the minimum amount was occurred in March. In summer, 37.7% was a seasonal maximum runoff ratio; on the other hand, 9.4% was a seasonal minimum runoff ratio in winter.

• Korean Journal of Radiology
• /
• v.23 no.9
• /
• pp.866-877
• /
• 2022

Objective: The optimal imaging approach for evaluating pathological nipple discharge remains unclear. We investigated the value of adding ductography to ultrasound (US) for evaluating pathologic nipple discharge in patients with negative mammography findings. Materials and Methods: From July 2003 to December 2018, 101 women (mean age, 46.3 ± 12.2 years; range, 23-75 years) with pathologic nipple discharge were evaluated using pre-ductography (initial) US, ductography, and post-ductography US. The imaging findings were reviewed retrospectively. The standard reference was surgery (70 patients) or > 2 years of follow-up with US (31 patients). The diagnostic performances of initial US, ductography, and post-ductography US for detecting malignancy were compared using the McNemar's test or a generalized estimating equation. Results: In total, 47 papillomas, 30 other benign lesions, seven high-risk lesions, and 17 malignant lesions were identified as underlying causes of pathologic nipple discharge. Only eight of the 17 malignancies were detected on the initial US, while the remaining nine malignancies were detected by ductography. Among the nine malignancies detected by ductography, eight were detected on post-ductography US and could be localized for US-guided intervention. The sensitivities of ductography (94.1% [16/17]) and post-ductography US (94.1% [16/17]) were significantly higher than those of initial US (47.1% [8/17]; p = 0.027 and 0.013, respectively). The negative predictive value of post-ductography US (96.9% [31/32]) was significantly higher than that of the initial US (83.3% [45/54]; p = 0.006). Specificity was significantly higher for initial US than for ductography and post-ductography US (p = 0.001 for all). Conclusion: The combined use of ductography and US has a high sensitivity for detecting malignancy in patients with pathologic nipple discharge and negative mammography. Ductography findings enable lesion localization on second-look post-ductography US, thus facilitating the selection of optimal treatment plans.

• Journal of Information Display
• /
• v.9 no.3
• /
• pp.28-32
• /
• 2008

Low sustained voltage $(V_s)$ and high luminous efficiency (lumen/Watts) are required for the enhanced performance of an AC PDP. Both are not realized in the same condition, however, because luminous efficiency decreases when the sustained voltage is lowered in most cases. In this study, the three design factors in the front panel of a PDP, i.e., the thickness and position of the bus electrode and the thickness of the dielectric layer, were chosen to investigate how they affect the sustained voltage and the luminous efficiency, and to find a way to optimize them. Two values were given to each of the three design factors, and experiments were done via full factorial design, i.e., with a total of eight conditions, using a 3-in.diagonal test panel. The changes in the sustained voltage and the luminous characteristics were explained in connection with the discharge characteristics of the PDP cells.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.10a
• /
• pp.44-50
• /
• 2001

A numerical study was made to choose the better turbulence model for the flow in the discharge flow path from a diffuser to a wall. In this study standard $\kappa-\epsilon$ model(SKE), RNG $\kappa-\epsilon$ model(RNG), and Reynolds stress model(RSM) were applied. In case of the flow with relatively high Reynolds number at a diffuser inlet, the pressure loss coefficients by RNG have a tendency to be near to those by SKE at small ratio(below about 0.35) of $h/D_o$, but to those by RSM at large ratio(above about 0.35). At large ratio RNG begins to enlarge the effects of rapid strain and streamline curvature. RNG & RSM are recommended as the appropriate turbulence models for this case. But it is noticeable that the velocity gradient pattern in RNG is same as in SKE, and also that the total pressure distribution in RNG is same as in RSM only at swirling flow area, same as in SKE only at main flow area.