• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.828-834
• /
• 2012

The present study has been conducted to investigate the effects of feeding seleniferous whole crop barley (WCB) to finishing pigs on their growth performance, blood and carcass characteristics as well as on tissue selenium deposition. A total of 40 cross-bred barrows ((Landrace${\times}$Yorkshire)${\times}$Duroc) were allotted to five replicates of four treatments. Each replicate was arranged to 2 pigs per pen; the experimental period lasted for 6 weeks. The finishing pigs were fed diets containing 0.1 (non-seleniferous WCB as a control), 0.2, 0.4 and 0.6 ppm of selenium (Se) by supplementing the diets with seleniferous WCB. The isonitrogenous and isocaloric diets containing 5% non-seleniferous or seleniferous WCB were formulated. Feeding seleniferous WCB did not affect (p<0.05) the feed intake and BW gain. Total blood lipid concentration was significantly (p<0.05) decreased with increasing Se levels. Total blood cholesterol concentration for the control was significantly (p<0.05) higher than that for 0.4 and 0.6 ppm of Se treatments. Increasing the Se levels in WCB significantly (p<0.05) decreased blood triglyceride concentration; however, the levels increased immunoglobulin G and selenium concentrations. Feeding seleniferous WCB did not affect the carcass rate, backfat thickness and meat quality as well as yield grades. The Se concentration in the kidney, liver and loin were significantly (p<0.05) increased with increasing levels of seleniferous WCB. The results indicated that feeding seleniferous WCB may improve the blood characteristics related to lipid metabolism and thus, could produce selenium-fortified pork. Moreover, it is shown that the dietary optimal selenium level to depose selenium in porcine tissues by utilizing seleniferous WCB would be 0.4 mg of Se/kg of ration. Moreover, when 100 g of pork produced from pigs raised under such condition is served to consumers, it meets the minimum recommended daily requirements (40 ${\mu}g$) of dietary selenium proposed by the World Health Organization (1996).

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.12
• /
• pp.1625-1632
• /
• 2009

Four lactating Holstein Friesian crossbred cows, with an average initial weight of 450 kg, 48${\pm}$12 days in milk and initial milk yield of 18 kg/h/d, were randomly arranged according to a 2${\times}$2 factorial arrangement in a 4${\times}$4 in Latin square design with 21-d period to investigate the effects of type of total mixed ration (TMR) and type of whole cottonseed (WCS) on intake, digestibility and milk production. The dietary treatments were i) TMR and WCS supplementation at 0.5 kg/h/d, ii) TMR and cracked WCS (cWCS) supplementation at 0.5 kg/h/d, iii) fermented TMR (FTMR) and WCS supplementation at 0.5 kg/h/d, and iv) FTMR and cWCS supplementation at 0.5 kg/h/d. Voluntary feed intake was 15.9, 15.2, 15.4 and 15.6 kg DM/d in dietary treatment 1, 2, 3 and 4, respectively. Digestibility of DM, OM, CP, EE, NDF and ADF were not significantly different among dietary treatments. Ruminal pH, $NH_{3}-N$ and volatile fatty acids in the rumen were also not significantly different among type of TMR or type of WCS. Blood urea-N concentration was not significantly different among dietary treatments. Ruminal bacteria population tended to increase but ruminal protozoa population tended to decrease with supplementation of cWCS, but they were not affected by FTMR. Milk yield and 3.5% FCM were not statistically different among treatments (16.6, 16.2, 17.0, 16.3 kg/d and 18.0, 18.6, 19.9 and 19.0 kg/d, respectively). Milk composition was not significantly different among dietary treatments. However, unsaturated fatty acids in milk fat in cows fed FTMR were lower (p<0.05) than in cows fed TMR. In conclusion, fermentation is a conceivable method to improve the quality of TMR for long-time storage and the cracking method is suitable to release the fat from cottonseed for enhancing fatty acid deposition in milk. Thus, the combination of FTMR and cWCS supplementation would be an alternative strategy to improve performance of lactating cows.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.6
• /
• pp.888-898
• /
• 2018

Objective: The study was conducted to investigate the effects of replacing soybean meal (SBM) with different levels of detoxified Jatropha curcas kernel meal (DJM) in growing pig diets on growth performance, nutrients digestibility and meat edibility. Methods: A total of 144 pigs with initial body weight of $20.47{\pm}1.44kg$, were randomly allocated to 6 dietary treatments with 6 replications per treatment and 4 pigs per replication for a period of 79 days. Six diets (DJM0, DJM15, DJM30, DJM45, DJM60, and DJM75) were formulated using DJM to replace 0%, 15%, 30%, 45%, 60%, and 75% of SBM. From d 37 to 42, feces and urine were total collected from six barrows in each treatment. At day 79, thirty-six pigs were slaughtered for sampling. The feed intake and weight gain were recorded, while the intestinal morphology, digestive enzyme activities, nutrient digestibility and the content of residual phorbol esters in muscles were determined. Results: The results showed that increasing the replacement of SBM with DJM decreased the parameters including body weight, average daily gain, average daily feed intake, gain-to-feed ratio, weight and villus heights of duodenum, villus height and villus height/crypt depth of jejunum, digestive enzymes (protease, amylase, lipase, and trypsin) activities, and nutrients digestibility (nitrogen deposition, digestibility of nitrogen, energy digestibility, and total nitrogen utilization) (linear, p<0.05; quadratic, p<0.05) and there was no significant difference among DJM0, DJM15, and DJM30 in all measured indices. The highest diarrhea morbidity was observed in DJM75 (p<0.05). Phorbol esters were not detected in pig muscle tissues. Conclusion: The DJM was a good protein source for pigs, and could be used to replace SBM up to 30% (diet phorbol esters concentration at 5.5 mg/kg) in growing pig diets with no detrimental impacts on growth performance, nutrient utilization, and meat edibility.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.148-172
• /
• 1997

Sixty human premolar teeth were used for this in vitro study. After each tooth was sectioned mesiodistally, one half was used for the experimental group and the other half for the control. Three groups were made for each fluoride applying method and twenthy teeth were assigned to each group. Ten teeth were used for evaluating total fluoride amount and the other ten were used for firmly-bound fluoride. Fluorshield was used for fluoride-releasing sealant and 1.23% APF, 0.05% NaF were used for topical application fluorides. Each tooth was cleaned with a tooth brush using nonfluoride containing pumice before the experiment. In the sealant group, fluoroshield was applied to the enamel surface without etching procedure and stored in $37^{\circ}C$ saline for 30 days. After 30 days, sealant was removed with explorer without scratching the enamel surface and washed with distilled water and dried. In the APF group, each tooth was immersed in 1.23% APF for 30 min then washed and dried in the same manner. In the NaF group, each tooth was immersed in 0.05% NaF for 24 hours then washed and dried as described above. After each fluoride regimen was applied, ten teeth were randomly selected from each group and immersed in 1M KOH solution for 24 hours to remove loosely-bound fluoride possibly deposited by the three different fluorides applied. In each group, total fluoride amount deposited and the amount of enamel removed by acid biopsy were calculated. After loosely-bound fluoride was removed, firmly-bound fluoride deposited and the amount of enamel removed by acid biopsy were also calculated. Total fluoride amount deposition was significantly increased in the APF and NaF groups, but not in the sealant group. Amount of enamel removed by acid-biopsy was also significantly diminished in the APF and NaF groups, but not in the sealant groups. After loosely-bound fluoride was removed from each groups, no statistical difference was found in the amount of firmly-bound fluoride in any groups. Also no effect of firmly-bound fluoride on enamel dissolution was shown in any groups after loosely-bound fluoride was removed from each group. In conclusion, topical application method of APF or NaF is more effective than fluoride-releasing sealant application to make $CaF_2$ coating on enamel surface and $CaF_2$ coating is the main source for anticariogenic effect of fluoride. However, longterm anticariogenic effect of fluoride-releasing sealant should be further evaluated.

• Journal of the Korean Vacuum Society
• /
• v.8 no.2
• /
• pp.102-110
• /
• 1999

The LIGA X-ray exposure step was modelled into three inequalities, by assuming that the X-ray energy attenuated within a resist is deposited only in the localized range of the resist. From these inequalities, equations for the minimum and maximum exposure times required for a good quality microstructure were obtained. Also, an equation for the thickness of an X-ray mask absorber was obtained from the exposure requirement of threshold dose deposition. The calculation method of the synchrotron radiation power from a synchrotron radiation source was introduced and applied to an X-ray exposure step. A power from a synchrotron radiation source was introduced and applied to an X-ray exposure step/ A power function of photon energy, approximating the attenuation length of the representative LIGA resist, PMMA, and the mean photon energy of the XZ-rays incident upon an X-ray mask absorber were applied to the above mentioned equations. Consequently, the tendencies of the minimum and maximum exposure and with respect to mean photon energy and thick ness of PMMA was obtained. Additionally, the tendencies of the necessary thickness of PMMA and photon energy of the X-ray mask absorber with respect to thickness of PMMA and photon energy of the X-rays incident upon an X-ray mask absorber were examined. The minimum exposure time increases monotonically with increasing mean photon energy for the same total power density and is not a function of the thickness of resist. The minimum exposure time increases with increasing mean photon energy for the same total power density in the case of the general LIGA process, where the thickness of PMMA is thinner than the attenuation length of PMMA. Additionally, the minimum exposure time increases monotonically with increasing thickness of PMMA. The maximally exposable thickness of resist is proportional to the attenuation length of the resist at the mean photon energy with its proportional constant of ln $(Dd_m/D_{dv})$. The necessary thickness of a gold X-ray mask absorber due to absorption edges of gold, increases smoothly with increasing PMMA thickness ratio, and is independent of the total power density itself. The simplicity of the derived equations has made clearly understandable the X-ray exposure phenomenon and the correlation among the exposure times, the attenuation coefficient and the thickness of an X-ray mask absorber, the attenuation coefficient and the thickness of the resist, and the synchrotron radiation power density.

• Journal of Wetlands Research
• /
• v.15 no.2
• /
• pp.215-222
• /
• 2013

In this study, the nutrient concentration changes along the hydrologic flow path of a free water surface flow constructed wetland (CW) treating agricultural stream runoff was investigated. Dry sampling was performed from April 2009 to November 2011 at five locations representing each treatment units of the CW. Grab water samples were analyzed for nitrogen forms such as total nitrogen (TN), total Kjeldahl nitrogen, nitrate, and ammonium; and phosphorus forms including total phosphorus (TP) and phosphate. Findings revealed that the physical properties such as temperature, dissolved oxygen and pH affected the TP retention in the CW. High nutrient reduction was observed after passing the first sedimentation zone indicating the importance of settling process in the retention of nutrients. However, it was until the 85% of the length of the CW where nutrient retention was greatest indicating the deposition of nutrients at the alternating shallow and deep marshes. TN and TP concentration seemed to increase at the final sedimentation zone (FSZ) suggesting a possible nutrient source in this segment of the CW. It was therefore recommended to reduce or possibly remove the FSZ in the CW for an optimum performance, smaller spatial allocation and lesser construction expenses for similar systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.3
• /
• pp.307-326
• /
• 2004

Statement of problem. The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. Purpose. This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. Material and methods. Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anoclizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. Results. 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.10
• /
• pp.1437-1449
• /
• 2006

Thirty six pre-weaned Barbari kids at 4 months age were reared on four rations computed using coarse cereal grains and by-products of pulses and oil seeds with Crude Protein (CP) and Total Digestible Nutrients (TDN) of 12 and 55% (Low protein Low energy); 12 and 60% (Low protein High energy); 14 and 55% (High protein Low energy); and 14 and 60% (High protein High energy), respectively. After 180 days on feed, male animals ($4{\times}5=20$) were slaughtered to study the effect of diet on carcass characteristics and meat quality. To asses the effect, if any, of such diet on product quality, meat balls were prepared and evaluated for quality changes when fresh as well as during storage ($-20{\pm}1^{\circ}C$). Feeding a ration with CP12 and TDN 60% (LH) to kids produced animals with highest slaughter weight (20.3 kg) yielding higher carcass weight and dressing percentage, lean (65.6%) and fat (6.6%) contents with low bone and trim losses. Although total variety meat yield was markedly higher in HL, the non-carcass fat deposition was relatively higher in LH carcasses. The water activity ($a_w$) of fresh goat meat ranged from 0.994-0.995 and total cholesterol 72.8-90.5 mg/100 g meat. The pH was high in HL and HH meat resulting in decreased ($p{\leq}0.05$) extract release volume (ERV). Meat balls were prepared using meat obtained from goats fed different rations (treatments) and stored at $-20{\pm}1^{\circ}C$. They were evaluated on day 0 and months 1, 2, 3, 4 for physicochemical, microbiological and organoleptic changes. Overall moisture (%), $a_w$, TBA number and pH value were 67.9, 0.987, 0.17, 6.6 respectively and were not affected by treatments except pH that was significantly ($p{\leq}0.01$) lower on LH. As the storage period advanced moisture, pH, $a_w$ and TBA number increased irrespective of treatments. Feeding various diets had no marked effect on microbial load of meat balls but with increasing storage period Standard Plate Count (SPC) and psychrotrophs declined ($p{\leq}0.01$). Treatment LL and LH produced meat balls with better flavour.

• Korean Journal of Ichthyology
• /
• v.13 no.1
• /
• pp.6-18
• /
• 2001

Larvae of the gunnel Pholis fangi were collected in coastal waters off Daecheon with a bag net from March to June, 1988, and with a ring larva net in February 1989. Maturity and spawning period were analyzed by examination of the gonads of adult fish collected with a bag net from May 1998 through November 1999. In February, the larvae were widely distributed in the outer and inner Cheonsu Bay. From March to April the larvae were present mainly the inner bay; they were absent there in May and found mainly in the outer bay. After June, few gunnel larvae were collected in the study area. This suggests a seaward movement of gunnel from the nursery grounds of the bay to offshore feeding grounds. The otolith of larvae smaller than 10 mm in total length did not show a distinct growth stop. The growth stop is believed to be formed in the early larval stage when the total length is about 10 mm. This period coincides with the time of shoreward migration, suggesting a metabolic change during this period. At a total length of 30 to 40 mm, the shape of the otolith changes from spherical to elongate. Daily growth rate in length was estimated by the Gompertz equation, which is represented as follows: TL = 6.702exp{2.925"1-exp (-0.008 t)"} ($r^2=0.94$, N = 92) Assuming daily deposition of growth increments in the otolith, the time of first growth increment formation was shown to be from December to January. Gonad observations show that Pholis fangi spawns from November to December. So, the hatching time is thought to be about one month.

• Journal of Applied Biological Chemistry
• /
• v.64 no.3
• /
• pp.291-298
• /
• 2021

In this study, we investigated whether the combined administration of berberine (BBR) and silibinin (SBN) was effective in improving hyperlipidemia and anti-obesity efficacy using a high-fat diet (HFD)-fed obese mouse model. HFD-induced obese mice were supplemented with the BBR and SBN combination (BBR-SBN) along with the HFD administration for 8 weeks. During the experiment, body weight, food intake, and levels of total cholesterol, triglyceride and high-density lipoprotein (HDL)-cholesterol were analyzed. Consumption of HFD in the mice caused rapid increases in body weight and the levels of total cholesterol and triglycerides compared to the normal control (NC) group. However, supplementation of BBR-SBN in these obese mice significantly reduced body weight gain and suppressed the levels of total cholesterol and triglyceride with the increment of HDL cholesterol level. In the HFD-fed group, abdominal fat weight was significantly increased and the adipocytes within the epididymal adipose tissue were found to have expanded sizes compared to the NC group. However, in the BBR-SBN group, the sizes of the adipocytes were comparable to those of the NC group and abdominal fat weight was significantly reduced. Moreover, the deposition of giant vesicular fat cells in liver tissues seen in the HFD-fed group was considerably reduced in the BBR-SBN group. These results suggest that the BBR-SBN combination tends to have synergic potential as an anti-obesity agent by significantly reducing body weight gain as well as lowering serum lipid levels and thus improving anti-obesity efficacy in HFD-induced obese mice.