• International Journal of Industrial Entomology and Biomaterials
• /
• v.14 no.1
• /
• pp.23-32
• /
• 2007

The nature of genetic variation and diversity among the 65 multivoltine silkworm genotypes was evaluated for 16 post cocoon characters. The components of genetic variation revealed higher PCV (60.487%) and GCV (44.56%) for evenness (variation 1) followed by cohesion (PCV=55.38%, GCV=40.36%) and non-broken filament length (PCV=32.05%, GCV=31.28%). The higher heritability ($h^2$ in broad sense) was observed for boil-off loss (95.6%) followed by non-broken filament length (95.22%). The both genotypic and phenotypic correlation indicated significant positive correlation of filament length with non-broken filament length, silk recovery, raw silk, neatness, and low neatness; and negative correlation with denier, renditta and silk waste. The principal component analysis (PCA) revealed 75.381 % of total variance from the five principal components extracted. On the basis of Mahalonobis' $D^2$ values (Ward's minimum variance), the sixty-five multivoltine silkworm genotypes were classified in to 9 clusters with substantial inter and intra cluster distances. Number of genotypes included in different clusters varied from 3 to 17. The results indicated that the optimum distance obtained in cluster VII (15.059) along with higher cluster mean values especially for filament length, non broken filament length, renditta, silk recovery, silk waste, and raw silk emphasized the utilization of these genotypes in the conventional silkworm breeding programme for improvement of multivoltine silk fibre quality. The possibility of exploiting genetic variation in post cocoon traits for efficient breeding programme is discussed.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.558-561
• /
• 2001

SIP(Soil cement Injected Precast pile) that inserts a precast pile after injecting a cement paste into a boring has been applied rapidly through the change of construction circumstances. But there isnt any logical equation of a bearing capacity fitted to SIP yet. So Meyerhof equation has mainly been used to predict a bearing capacity in a design stage instead. But it has shortcomings such as lack of confidence because it has derived not from a theory but from an experience obtained from the result of SPT (Standard Penetration Test) and because a penetration depth tends to be deeper by an excessive design that depends on an end bearing capacity of a pile more than a skin frictional resistance. In this study, thereupon, a direct shear test in the laboratory was performed to both SM and SC soils in variable conditions to verify skin friction properties for the purpose of presenting some reasons capable of reducing penetration depths. Through the tests, soil to soil of SM in cohesion, rough panel to soil of SM in friction angle and soil to soil of SM in shear strength tended to be high. And a shear strength increased as its total unit weight increased in all cases.

• Journal of Korean Academy of Nursing
• /
• v.29 no.4
• /
• pp.829-840
• /
• 1999

This study was conducted to construct a hypothetical model of depression in Korean adolescent women and validate the fit of the model to the empirical data. The data were collected from 345 high school girls in Seoul, from May 1 to June 30, 1998. The instruments were the Body Mass Index, Physical Satisfaction Scale, Family Adaptatibility and Cohesion Evaluation Scale III, Family Satisfaction Scale, CES-D and School Adptation Scale. The data were analyzed using descriptive statistics with the pc -SAS program. The Linear Structural Relationship(LISREL) modeling process was used to find the best fit model which would predict the causal relationships among the variables. The overall fit of the hypothetical model to the data was moderate ［X$^2$＝69.6(df＝17, p＝.000), GFI ＝0.95, AGFI＝0.90, RMR＝0.087, NNFI＝0.86, NFI＝0.90］. The predictable variables, especially menstrual symptoms, physical symptoms and family function, had a significant direct effect on depression. but school life adaptation did not have a significant direct effect. These variables explained 18.1% of the total variance.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.91-97
• /
• 2009

In this thesis presents the application to the field of Hwangto-used concrete highlighted as an eco-friendly material and performs an experiment in the aspect of construction and quality on the construction for all parts of buildings, rather than for some parts of buildings as shown from existing application and got the conclusion as followings. 1) It was turned out that Hwangto concrete showed lower hydrated heat and arid contraction comparing to those of cement concrete. And this phenomenon is judged to appear high when applied to mass building and huge span structures. 2) The construction of Hwangto concrete is judged to be possible in applying to constructions since the mechanical construction seems to be possible by using pump car and ready-mixed concrete which are used at the practical sites at the moment. 3) The pockmarks appearing on the exposure surface were about 2% of total area. This has great cohesion by Hwangto concrete but is judged that it will be improved through enough vibration stamping. Through the experiments of quality and construction of Hwangto concrete as environment-friendly construction materials, it is possible to judge modernized application of Hwangto concrete. It is in need of more studies about economical efficiency, structural stability, design application, etc. afterwards.

• The Journal of Economics, Marketing and Management
• /
• v.12 no.2
• /
• pp.37-49
• /
• 2024

Purpose: This study aimed to enhance understanding of multicultural families in South Korea by examining the impact of family functions on their quality of life and exploring how parenting attitudes in multicultural families influence the relationship between family functions and quality of life. Research design, data and methodology: This study obtained a total of 124 valid surveys with the assistance of the Cheonan and Asan Multicultural Centers. Using SPSS 24.0 and AMOS 24.0, the study conducted frequency analysis, descriptive statistical analysis, reliability and validity, and correlation analysis. To test hypotheses, the study conducted simple (multiple) regression and three-step mediation regression analysis. Results: The results revealed that family functions in multicultural families have a significant impact on parenting attitudes, and parenting attitudes have a significant impact on the quality of life. Additionally, except for autonomy and rational parenting attitudes, parenting attitudes were found to have partial mediating effects between family functions and the quality of life. Conclusions: It was empirically demonstrated that parenting attitudes, along with family functions, are crucial factors for improving the quality of life. The study suggests various methods at the levels of multicultural families, local communities, and the national level to enhance the quality of life in multicultural families.

• Geomechanics and Engineering
• /
• v.37 no.3
• /
• pp.253-262
• /
• 2024

Dynamic properties are pivotal in soil analysis, yet their experimental determination is hampered by complex methodologies and the need for costly equipment. This study aims to predict dynamic soil properties using static properties that are relatively easier to obtain, employing machine learning techniques. The static properties considered include soil cohesion, friction angle, water content, specific gravity, and compressional strength. In contrast, the dynamic properties of interest are the velocities of compressional and shear waves. Data for this study are sourced from 26 boreholes, as detailed in a geotechnical investigation report database, comprising a total of 130 data points. An importance analysis, grounded in the random forest algorithm, is conducted to evaluate the significance of each dynamic property. This analysis informs the prediction of dynamic properties, prioritizing those static properties identified as most influential. The efficacy of these predictions is quantified using the coefficient of determination, which indicated exceptionally high reliability, with values reaching 0.99 in both training and testing phases when all input properties are considered. The conventional method is used for predicting dynamic properties through Standard Penetration Test (SPT) and compared the outcomes with this technique. The error ratio has decreased by approximately 0.95, thereby validating its reliability. This research marks a significant advancement in the indirect estimation of the relationship between static and dynamic soil properties through the application of machine learning techniques.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.63-71
• /
• 2011

A large volume of uranium electrokinetic leachate has been generated during the electrokinetic decontamination to remove uranium from contaminated soil. The treatment technology for the reuse of the uranium leachate was developed. The concentration of uranium in the generated uranium leachate was 180 ppm and concentrations of Mg(II), K(I), Fe(II), and Al(III) ions ranged from 20 ppm to 1,210 ppm. The treatment process for uranium leachate consisted mainly of mixing and cohesion, precipitation, concentration, and filtration. In order to obtain the pH=11 of a precipitate solution, the calcium hydroxide needs to be 3.0g/100ml and the sodium hydroxide needed to be 2.7g/100ml. The results of several precipitation experiments showed that a mixture of NaOH+0.2g alum+0.15g magnetite was an optimal precipitant for filtration. The average particle size of precipitate with NaOH+alum+0.15g magnetite was $600\;{\mu}m$. Because the total value of metal concentrations in supernatant at pH=9 was the smallest, sodium hydroxide should be added with 0.2g alum and 0.15g magnetite for pH=9 of leachate.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.154-159
• /
• 2007

In efforts to use pine needle extract as a substitute for sugar, fermented pine needle extract syrup was added to the wheat flour nea in the manufacture of white bread The extract was added to levels of 8.3%, 11% and 18% of total weight based on the Brix degree of the dough The cohesion of each dough was checked, and the physical properties and storage stabilities of the baked breads were analyzed during storage at mom temperature. Analysis of the cohesion of each dough by farinogram showed that dough with pine needle extract was better than dough with sugar, in terms of both stability and durability of mixing. The pH of dough with syrup was steady during storage at pH 5.4 5.8, which is favorable for yeast activity. The dough with syrup also showed low firmness and good extensibility, both of which would favorably affect gas retention on fermentation. Increases in syrup addition resulted in higher product volumes. Bread with syrup was slow to increase in hardness during storage, suggesting that higher syrup concentrations inhibited development of staleness. The addition of syrup also inhibited the growth of aerobic bacteria and mold on the bread surface. The addition of syn did not cause any negative effect. The use of pine none extract syrup may thus contribute to improvements the physical properties, the storage stability, and the hygienic quality of bread.

• Geotechnical Engineering
• /
• v.10 no.2
• /
• pp.121-140
• /
• 1994

This paper presents the probabilistic model to evaluate the three-dimensional stability of layered deposits and c-0 soil slopes. Rotational slides are assumed with a cylindroid control part terminated with plane ends. And the potential failure surfaces in this study are assumed with the logarithmic spiral curve refracted at boundary of layers. This model takes into consideration the spatial variabilities of soil properties and the uncertainties stemming from insufficient number of samples and the discrepancies between laboratory measured and in -situ values of shear strength parameters. From the probabilistic approxi mate method (FOSM and SOSM method), the mean and variance of safety factor are calculated, respectively. And the programs based on above models is developed and a case study is analysed in detail to study the sensitivity of results to variations in different parameters by using the programs developed in this study. On the basis of thin study the following conclusions could be stated : (1) The sensitivity analysis shown that the probability of failure is more sensitive to the uncertainty of the angle of internal friction than that of the cohesion, (2) The total 3-D proability of failure and the critical width of failure are significantly affected by total width of slope. It is found that the total 3-D probability of failure and the critical width of failure increase with increasing the slope width when seismic forces do not exist and the total 3-D probability of failure increases with increasing the slope width and the critical width of failure decreases when seismic intensity is relatively large, (3) A decrease in the safety factor (due to effect such as a rise in the mean ground water level, lower shear strength parameters, lower values for the correction factors, etc.) would result in reduction in the critical width of failure.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.13-24
• /
• 2018

As food consumption pattern changes (reduced rice consumption and increased consumption of fresh vegetables), managing upland fields became a greater priority. However, the agricultural infrastructure projects have been focused on rice farming, and the infrastructure level to support dry fields cultivation is insufficient. The purpose of this study was to spatial distribution analysis of these dry fields with farm manager registration information. Using FRAGSTATS, we analyzed landscape indices (TA/CA, NP, PD, LSI, LPI, PLADJ, COHESION, CONNECT, AI) of farmlands in which farmers in 13 regions (Si or Gun) cultivated dry-field crops. As results of this analysis, the total area of the fields in Naju-si, Hampyeong-gun and Suncheon-si were found to be wider, but the average area of a patch in Youngam-gun, Hampyeong-gun and Jangseong-gun were wider than other regions. On average, each farmer had farmlands containing of 1.7~2.4 patches and cultivated crops in fields of 0.2~0.5 ha. Farmlands of Hampyeong-gun, Youngam-gun, Naju-si showed high values in adjacency indices, however the farmlands of Suncheon and Gwangyang showed fragmented distribution with low values in adjacency indices. These results of fragmentation analysis of farmlands could be used when we establish the plan of an agricultural infrastructure project or select places for a collaborative agricultural management business promotion project.