As the body shape change which occurs after middle age is the main factor affecting the fit of ready-to-wear clothes, this study was designed to classify and analyze the torso shapes of middle-aged men. This study sorted 3D body scans of 200 men aged 40-64 from the 8th Size Korea (2021) database and extracted their 47 measurement values using the Grasshopper algorithm for automatic extraction landmarks and measurements, developed by the previous research (Ryu & Song, 2022). Eight principal components (torso length, shoulder size, overall body size, abdomen prominence, back protrusion, neck inclination, upper body slope, and hip prominence) were identified and four torso shapes were classified. Shape 1 (28.5%) exhibited the shortest torso length, the narrowest shoulders, and the most protruding back. Shape 2 (21.0%) exhibited the skinniest body and the largest backward inclination of the upper body. Hence, the back appeared to be protruding, and the abdomen looked prominent. Shape 3 (25.5%) had the largest overall body size. Thus, the abdomen looked the least protruding, and it exhibited the flattest back. Shape 4 (25.0%) had the longest torso, widest shoulders, straightest neck, and the least protruding hips. This study suggested these three discriminant functions to identify a new person's torso type.
This study develops a fitted torso type basic pattern for men by utilizing 3D body scan data. Recent fashion trends are reflected in the development of the pattern. The subjects were 15 men in their 20's, who wear size 95 (M size). Body scan data was obtained through a 3D whole body scanner (WB4, Cyberware, USA), and a body surface development figure for developing male fitted torso type basic pattern was attained through the use of Rapid Form 2006 as well as Auto CAD 2006 programs. The results are as follows: A body surface development figure through body surface segment method showed high exactitude in an error range of 100$\pm$1%. In addition, it occurred in an error range of 100:1:3% because of the hard scanning conditions in the incline of the shoulder and armpit areas. However, the body surface development figure as well as the direct measurement results can be used as basic data for the given patternmaking since the error range falls into 100$\pm$3%. Dart amounts obtained from the average cross section were center back 2.2cm (24.3%), back armpit point 3.8cm (41.8%), front armpit point 3.0cm (33.9%). As shown the jacket pattern, the biggest dart amount was portioned out at the back armpit point. The drafting equations for the development pattern acquired are as follows; Full width=C/2+5cm, back length=height/4-1cm, armhole depth=(C/10+12cm)+3cm, back width=2C/10+2cm, front width=2C/10. The development pattern was a fitted torso basic pattern that was composed of 3 pieces, so it would be very useful in developing shirt or jacket patterns. According to the results of the evaluation of the developed pattern appearance, it obtained higher scores of over 3.5 points in almost items, meaning that the developed pattern is appropriate for a male fitted torso type basic pattern. It suggests a possibility of patternmaking from a body surface development figure in 2-D to prototype.
This study develops 1/2 dress forms for draping. This study investigated the production status of domestic and foreign products in order to model their shape using CLO 3D. In addition, it developed torso-type and torso-crotch-type products that allowed for draping using a 3D printer. This study analyzed shape and size compared to developed ones after referring to the Size Korea 7th Survey data as well as seven domestic and foreign company websites. The results are follows. First, an investigation of the production status of the products for the size of most of the domestic ones (except K-4) indicated that the waist circumference was slimmer than Size Korea. Bust, waist, and hip circumferences ranged from 42.0 cm, 32.0 cm, and 45.0 cm - 49.0 cm, respectively, in Chinese products; 42.0 cm - 43.0 cm, 30.5 cm - 31.5 cm, and 46.0 cm - 46.5 cm in Japanese products; 43.0 cm, 35.0cm, and 46.5 cm in American products (Japanese body shape applied). Second, an avatar was produced on a 3D software with the average size of 20-24year-old women, and its file modified as a dress form for 3D printing with PLA filament to produce dress forms for draping, workable with pins, using quilting cotton and cotton cloth. Third, the comparisons of the form and flattening between the developed dress forms and the selling ones indicated that flattening was bigger in the waist part of the former than the latter. The waist is produced too slim in the existing dress forms; therefore, it is necessary to correct the waist circumference. Unlike existing dress forms, the developed ones were produced in proximity to the average size of 20-24 year-old women in the Size Korea 7th Survey.
This study used 3D anthropometric data from the 8th Size Korea to type and analyze whole body shapes of obese women in their 20s and 30s, and constructed dimensional data for human body items needed to create a 3D human body model for each type. The data analysis used data from 148 obese women in their 20s and 30s, and a total of 48 index values, drop values, and angle items were subjected to factor analysis and one-way variance analysis to categorize body types and verify significant differences by type. As a result of the factor analysis, 12 factors were extracted and divided into 4 body types. Type 1 is a 'standard type with a curved torso with balanced upper and lower body lengths', Type 2 is a 'bending forward type with a short, thick lower body, and an uncurved torso', Type 3 is a 'lean back type with a long and thin lower body and an H-shape torso', Type 4 is a 'sway back type with a long and thick lower body and abdominal obesity'. The representative body type of obese women in their 20s and 30s was identified as Type 1. The constructed body shape information will be used as basic data for future 3D human body modeling.
This study is designed to analyze the similarity of fit and appearance between 3D virtual torso length sloper with real torso length sloper according to three 3D virtual clothing simulation programs (Optitex, CLO 3D, i-Designer), three body types (A, N, H) and fit status. We selected three representative body type models of females aged 20~30 and got their direct body measurements. Using these body measurements, we developed three 3D avatar body models and made three torso length fitted sloper with long sleeves. Thirty expert fit judges consisting of technical designers and graduate students assessed the similarity of fit and appearance between 3D virtual clothing and real clothing by observing images classified into front, back and side scene. We conducted ANOVA and post-hoc analyses to compare fit and appearance between real clothing and virtual clothing depending on three program. The results showed that CLO 3D represented fit and silhouette most similarly among the programs, especially girths, width and length. i-Designer tended to be relatively good to represent stress fold amount and silhouette. Optitex was assessed relatively better in expressing ease amounts in torso girths and armscye girths, but relatively worse for width, length, stress fold amount and silhouette.
This study provides basic research for developing dress forms of women's wear making. This study compared the average body size of Korean women by investigating the shape, composition and size of 417 dress forms for pattern making, sold at Korean and international online malls. The results showed that Korean brands produced torso-type and torso-crotch-type (94.13%), torso-type was the most dominant type made by Japanese Ki and French St (${\geq}80%$), and all US Al products were whole-body-type. The most common used internal filler of the dress forms was urethane for South Korean companies and paper for Japanese Ki and French St. In most cases, cotton was used for outer materials. Alternatively, linen and rayon were used as outer materials. Al did not indicate the materials used for filler and outer layers. Additionally, the sizing system of dress forms was commonly presented as a Numeric type. In addition to Numeric type, Ki presented body type + usage and Al used character type. When the dress form size for the average bust size of each age group was evaluated, waist measurements were smaller than the corresponding bust measurements. Dress form was presented in the KS interval and was compared with the $mean{\pm}1{\sigma}$ interval of each age group. The majority of the dress forms produced in South Korea were for body shapes in their 20s.
The purpose of this thesis was to develop torso patterns according to the physical types of men in 20s. The procedure and results are as follows; 1. Of the men in 20s meeting the national average of physique, 4 men were selected and classified into 2 physical types according to their chest and waist circumference drops. One group had 20㎝ drop (Y type) while the other had 16㎝ drop (N type). Through evaluation performed by clothing construction professionals on the 4 upper bodice blocks drafted according to the existent drafting method and dressed on the 4 men, several problems have been found. These problems were adjusted and supplemented to make two new blocks. The fit of the new blocks were evaluated and proved to be satisfactory. 2. The following is the adjustments made to the existent men's torso patterns which had been utilized as the objects the first evaluation experiment. ① Though the back waist length of the pattern from the existent drafting method covered the center back length of the body in both Y type and N type, the front length did not causing it to stand away from the body. To adjust this, 2.0㎝ has been added to the center front length of each pattern so that the waist line could make a bar level to the ground. ② The shoulder line of the pattern from the existent drafting method had the tendency to fall backward. To make the shoulder line to fall in place, it has been moved 1.0㎝ to the front. 0.5㎝ has been added to the should length. ③ The neckline had a tendency to climb up. It has been lowered by 0.5㎝ until the line touched the center front neck point. ④ Though different in degree, the neck circumference did not allow enough width for both physique type causing the neckline to pull at side neck point with diagonal crease. To adjust this, 0.3㎝ and 0.6㎝ has been added to the Y type and N type respectively so that the neckline would touch the side neck point and the neckline could naturally fall into its original position. ⑤ Though different in degree, there was not enough space at the armhole causing wrinkles around this area. Therefore, 0.25㎝ and 0.5㎝ has been added to the front and back of the armholes of the Y and N types respectively. The armhole was made 1.0㎝ deeper only for the N type. ⑥ 1.0㎝ in the front and 0.5㎝ in the back were added to the side scam for the Y type while 0.5㎝ in the front and 0.25㎝ in the back were added for N type. This eliminated the unwanted wrinkles to give the silhouette a smooth look.
This study builds a database that can be reflected in the production of dress form for fitting by typifying the upper body shape of a senior male. This study analyzed the 3D shape data of 405 persons of the 5th Size Korea. The age range is from 50s 210 persons and 60s 205 persons. Analysis items to identify upper body shape of senior males consisted of 51 items. 3D shape data were also measured using a Geomagic Design ${\times}$ program for the analysis of the upper body of the senior male required for the dress form of this study. The reference point was based on the Size Korea 2010 3D measurement standard and created points (Back-protrusion) on shape data. As a result of the senior men type, the senior men's body type was classified into four types:1. Overall, the upper body is a large body type and the most undistorted overall body type 2. Width / Thickness Flatness is the largest and vertical length factor is the smallest abdominal obesity type 3. Severe flexion of the back part type 4. The upper body is small and the scapular bending is severe. The elderly body type showed a high distribution ratio in the type with severe flexion. The development of a dress form that reflects the cause of the finery issue can improve the fit of ready-to-wear.
The purpose of this study is to develop a torso pattern that is highly representative for the proper body shape of women in their thirties. Size data of the women with age of 30 through 39 from the database of Size Korea 2004 were used for the study. In order to develop a master pattern which will be used as the benchmark for grading of research group, 4 existing torso block drafting methods were compared based on the data gathered and the block with the highest evaluation score was utilized as a reference point. For the analysis, data was divided into four types, only the data of 138 subjects which were evaluated at least by four or more experts as valid were used for the study. The major results can be summarized as follow. The women of bust girth of 91cm and height of 160cm which was turned out to be representative type of research group were used as standard measurement for the purpose of reflecting not only curve length of the 3D analysis measurement but also the difference between front and back thickness to the pattern. Dart locations were set based on front and back torso ease, shoulder area revisions, front sagging length 1.5cm and cross section crevice length analysis. According to the experts' appearance evaluation of the pattern was found to be better than the control pattern which was regarded as the best among 4 patterns created based on existing torso block drafting methods.
The aim of this study was to analyze and typify the body shape of tall women aged 20-69 using 3D measurement data from the 2020 8th Human Dimensions Survey data with greater than 165.0 cm in height defined as large stature. Each body type's characteristics were examined to derive points of differentiation compared to women of average body type. The analysis showed that as height increases, body height, length, and generally body circumference, thickness, and width also increase. However, taller women were found to have thinner waists, indicating a wider, flatter waist area. Waist circumference was also smaller, albeit not at a statistically significant level. Body shapes of adult women over 165.0 cm tall were classified into three types. The following body types were analyzed: thick ankles and drooping shoulders, thin and short torso, tall and long, long torso and thick ankles, large body circumference, thickness and width, normal torso length, and short stature and thin ankles. To develop garments for adult women over 165.0 cm tall, a new drafting method was required set the waist, knee height, and shoulder width.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.