• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.67-73
• /
• 2011

For loads analysis of airplane, applicable regulation should be determined. Then, loads conditions are prepared from the regulation. Modeling for aerodynamic, mass, and structure are performed. Panel method is usually adopted for aircraft loads analysis to obtain air loads. The ARGON which is a multidisciplinary fixed wing aircraft design software co-developed by the KARI and TsAGI are used for loads analysis. The ARGON can be utilized for flutter and stress analysis as well as for flight and ground loads analysis. In this paper, flight loads analysis for wing structural design of the regional aircraft at the conceptual design phase are performed with the ARGON. FAR 25 is used for the regulation for the load analysis. Shear force, bending moment and torsion diagrams for the wing and shear force and hinge moment for the aileron are presented.

• Computers and Concrete
• /
• 제10권5호
• /
• pp.489-505
• /
• 2012

This paper presents a simplified grid beam model for simulating the nonlinear response of reinforced concrete flat-plate structures. The beam elements are defined with nonlinear behavior for bending moment and torsion. The flexural stiffness and torsional strength of the beam elements are defined based on experimental data to implicitly account for slab two-way bending effects. A failure criterion that considers the interaction between the punching strength and slab flexural behavior is incorporated in the model. The effects of bond-slip of slab reinforcement on connection stiffness are examined. The proposed grid beam model is validated by simulating large-scale tests of slab-column connections subjected to concentric gravity loading and unbalanced moment. This study also determines the critical parameters for a hysteretic model used to simulate flat-plates subjected to cyclic lateral loading.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.564-568
• /
• 2006

Smooth picture module is operated by vibration to tilt the light from the DMD (digital micro mirror device) of DLP projection TV, which makes the screen of the TV smoother and DMD chip cost lower. To satisfy the vibration characteristics of smooth picture module, it is designed by optimizing moment of inertia, spring constant and damping coefficient, using structural and fluid dynamic simulation that showed a good agreement with experimental data. To reduce the material cost and moment of inertia, engineering plastic is used and the reliability is estimated. A VCM (voice coil motor) type actuator for smooth picture has to satisfy performance requirements such as higher driving force, lower power consumption, and lower cost. The initial design and optimization for VCM was performed using FE analysis. It allowed us to optimize the design of magnetic circuit of the proposed actuator to obtain higher force while maintaining a lower cost.

• 한국농공학회지
• /
• 제40권1호
• /
• pp.78-87
• /
• 1998

In this study, semi-rigid light-weight framed structures analysis model (SERIFS) was developed by advancing the LEIFS model. This model enables us to analyze simultaneous effects of large deflection and semi-rigid connection by computing unbalanced load occurring in the process of repeated loading through equalization of bending moments and torsion. This model is also able to handle the effect of the semi-rigid connection and large deflection by modifying the elastic stiffness matrix using moment-rotation behavior of connection. Moment-rotation behavior of the semi-rigid connection was adopted from the experimental results of load-vertical displacement of frame element In conclusion, this model achieves to analyze the nonlinear and large deflection behavior on the semi-rigid and light-weight steel frame connection.

• Structural Engineering and Mechanics
• /
• 제57권2호
• /
• pp.221-238
• /
• 2016

One of the objectives of this study is to implement the direct calculation of the torsional moment of inertia for non-circular cross-sections, which is based on the St. Venant torsion formulation and the finite element method. Recently the proposed method provides a unique calculation of the torsional rigidity of simply and multiply connected cross-sections. Next, free vibration analyses of cylindrical and non-cylindrical helices with non-circular cross-sections are solved by a curved two-nodded mixed finite element based on the Timoshenko beam theory. Some thin-thick closed or open sections are handled and the natural frequencies of cylindrical and non-cylindrical helices are compared with the literature and the commercial finite element program SAP2000.

• Computers and Concrete
• /
• 제29권 5호
• /
• pp.285-301
• /
• 2022

This study aims at developing a torsional strength model based on a nonlinear analysis method presented in the previous studies. To this end, flexural neutral axis depth of a reinforced concrete section and effective thickness of an idealized thin-walled tube were formulated based on reasonable approximations. In addition, various sectional force components, such as shear, flexure, axial compression, and torsional moment, were considered in estimating torsional strength by addressing a simple and linear strain profile. Existing test results were collected from literature for verifications by comparing with those estimated from the proposed model. On this basis, it can be confirmed that the proposed model can evaluate the torsional strength of RC members subjected to combined loads with a good level of accuracy, and it also well captured inter-related mechanisms between shear, bending moment, axial compression, and torsion.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.1-21
• /
• 2022

In the structural analysis of steel frames, joints are generally considered as rigid or hinged considering their moment transfer ability. However, the first studies conducted with the beginning of the 20th century showed that the joints do not actually fit these two definitions. In reality, a joint behaves between these two extreme points and is called semi-rigid. Including the actual state of the joint in the structural analysis provides significant economic advantages, so the subject is an intense field of study today. However, it does not find enough application area in practice. For this reason, a large-scale literature published from the first studies on the subject to the present has been examined within the scope of the study. Three important points have been identified in order to examine a joint realistically; modelling the load-displacement relationship, performing the structural analysis and how to design. Joint modelling methods were grouped under 7 main headings as analytical, empirical, mechanical, numerical, informational, hybrid and experimental. In addition to the moment-rotation, other important external load effects like axial force, shear and torsion were considered. Various evaluations were made to expand the practical application area of semi-rigid connections by examining analysis methods and design approaches. Dynamic behaviour was also included in the study, and besides column-beam connections, other important connection types such as beam-beam, column-beam-cross, base connection were also examined in this paper.

• 대한토목학회논문집
• /
• 제13권5호
• /
• pp.39-52
• /
• 1993

비대칭단면(非對稱斷面)을 갖는 박벽공간(薄壁空間)뼈대와 원형(圓形)아아치의 휨-비틂 좌굴해석(挫屈解析)을 수행하기 위하여, 가상(假想)일의 원리(原理)를 이용한 공간(空間)뼈대요소(要素)의 접선강도(接線剛度)매트릭스가 유도(誘導)된다. 양단(兩端) 구속(狗束)된 비틂을 무시(無視)하는 경우와 구속(狗束)된 비틂을 고려(考慮)하는 경우 각각에 대하여 semitangential rotation and moment에 대응(對應)하는 박벽공간(薄壁空間) 뼈대요소(要素)의 탄성(彈性) 및 기하적(幾何的)인 강도(剛度)매트릭스를 산정한다. 이 때, 휨을 받는 평면(平面)보의 처짐함수를 공간(空間) 뼈대요소(要素)의 축방향(軸方向) 및 횡방향(橫方向) 처짐과 비틂회전각에 대한 형상함수(形狀函數)로 사용한다. 순수휨과 균일한 압축력을 받는 도형(圖形)아아치의 횡좌굴문제(橫挫屈問題)를 해석(解析)하여 본(本) 연구(硏究)에 의한 해석결과(解析結果)과 문헌(文獻)의 엄밀해(嚴密解)에 의한 결과들을 비교(比較), 분석(分析)하여 본(本) 연구(硏究)에서 제시한 이론(理論)의 정당성(正當性)을 입증(立證)한다.

• The Journal of Korean Physical Therapy
• /
• 제13권1호
• /
• pp.1-18
• /
• 2001

Aging has been recognized as the primary cause of disc degeneration. A biomechanical characteristics of disc degeneration has been demonstrated that intradiscal pressure is reduced. With the increasing population of elderly people, disc degeneration and associated problems of nerve entrapment are becoming more prevalent. Presently, research on reduced intradiscal pressure associated with degeneration is insufficient. In this study. we used the Finite Element Method (FEM) of computerized simulations to investigate the effects of variation in intradiscal pressure on mechanical behaviours of L4-5 intervertebral disc degeneration. Degeneration was classified using four grades based on initial intradiscal pressure; Normal (135 kPa), mild(107 kPa), moderate (47 kPa) and severe (15 kPa). The predicted results f3r bending loads were as follows; 1 . Range of motion increased progressively with severity of degeneration with flexion and lateral bending moments, but decreased with extension moments. 2. Discal bulging of posterolateral aspect was larger in lateral bending and extension moment. But bulging was increased with severity of degeneration in lateral bending and torsion(same side).3. The rate of increasing intradiscal pressure was decreased in all bending motions with severity of degeneration. In conclusion, lateral bending and extension moment yield greatest bulging in severe degeneration. In torsion, although bending load produces disc bulging, disc bulging was associated more strongly with severity of degeneration than increasing torsional moments. Clinical Implications: Discal bulging may produce nerve root impingement and irritation. The effect of loading and posture on the varying degrees of disc degeneration has important implications especially in the elderly. In the presence of disc degeneration, avoidance of end range postures, especially extension and lateral bending may help reduce discal bulging and in turn, nerve entrapment.

• 대한치과교정학회지
• /
• 제33권2호
• /
• pp.131-140
• /
• 2003

본 연구는 전기도금을 이용하여 각형 선재의 굵기를 증가시킨 후 기존의 선재와 물성을 비교함으로써 이의 임상적 적용 가능성을 알아보고자 시행되었다. 한 변의 길이가 0.016 인치인 정사각형 스테인레스 스틸 교정용 선재에 니켈 전기도금을 시행하여 굵기를 0.001 인치 증가시켜 한 변의 길이가 0.017인치인 정사각형 선재로 만들었고 도금층의 밀착성을 증진시키기 위해 $400^{\circ}C$의 전기로에서 10분간 열처리를 시행하였다 시편의 물성변화를 알아보기 위하여 전기도금을 이용하여 제작된 15개의 시편을 실험군(016P군)으로, 기존의 0.016 인치 (016군), 0.017 인치 (017군) 스테인레스 스틸 교정용 선재를 대조군으로 설정한 후 3점 굴곡 시험과 비틀림 시험을 시행하여 다음과 같은 결과를 얻었다. 1. 3점 굴곡 시험 결과 0l6P군이 016군에 비해 강성과 항복강도, 극한강도 모두 증가하는 경향을 보였으며, 강성과 극한강도는 통계적으로 유의한 차이가 있었다(p<0.05). 2. 3점 굴곡 시험 결과 0l6P군이 017군보다 강성과 항복강도, 극한강도 모두 낮은 경 향을 보였으며, 강성은 통계적으로 유의한 차이가 있었다(p<0.05). 3. 비틀림 시험 결과 016P군이 016군에 비해 비틀림 강성과 항복 비틀림 모멘트, 최대 비틀림 모멘트 모두 높았으며, 통계적으로 유의한 차이가 있었다(p<0.05). 4. 비틀림 시험 결과 016P군이 017군에 비해 비틀림 강성과 항복 비틀림 모멘트, 최대 비틀림 모멘트 모두 낮은 경향을 보였으며, 이 중 항복 비틀림 모멘트와 최대 비틀림 모멘트에서 통계적으로 유의한 차이가 있었다(p<0.05). 이상의 결과를 요약해 보면 각형 선재에 도금을 시행하여 굵기를 증가시키고 물성이 증가될 수 있음을 알았다. 비록 도금을 시행한 016P군이 기존의 017군보다 강성이 낮았으나 이는 반대로 016P군이 017군보다 탄성이 높음을 나타내며 토크조절이 부족한 경우 브라켓 슬롯에 쉽게 삽입되어 교정력을 발휘할 것으로 기대된다.