• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.242-243
• /
• 2010

This paper investigates a power supply of medium voltage with enhanced ignition characteristics for plasma torch. Series resonant half-bridge topology is presented to be a suitable ignition circuitry. The ignition circuitry is integrated into the main power conversion system of a multi-phase staggered three-level dc-dc converter with a diode front-end rectifier. The plasma torch rated for 3MW, 2kA and having the physical size of 1m long is selected to be a high enthalpy source in waste disposal system. The steady-state and transient operations of plasma torch are simulated. The parameters of Cassie-Mary arc model are calculated based on 3D magneto-hydrodynamic simulations. Circuit simulation waveform shows that the ripple of arc current can be maintained within ${\pm}10%$ of its rated value under the existence of load disturbance. This power conversion configuration provides high enough ignition voltage around 5KA during ignition phase and high arc stability under the existence of arc disturbance noise resulting in a high-performance plasma torch system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1496-1497
• /
• 2007

This paper deals with the power system development of an arc plasma torch for current control and arc initiation. For stable output of a plasma torch, there are ways of supplying gas suitably, a plasma torch initiation and control system which can control desired output. The design of plasma torch is form of modified Huels type which has narrow downstream. This paper we product suitable feeder of power system and we can control stably in considering many work conditions.

• 융합보안논문지
• /
• 제22권4호
• /
• pp.129-133
• /
• 2022

딥러닝 프레임워크는 현재에도 계속해서 발전되어 가고 있으며, 다양한 프레임워크들이 존재한다. 딥러닝의 대표적인 프레임워크는 TensorFlow, PyTorch, Keras 등이 있다. 딥러님 프레임워크는 이미지 학습을 통해 이미지 분류에서의 최적화 모델을 이용한다. 본 논문에서는 딥러닝 이미지 인식 분야에서 가장 많이 사용하고 있는 TensorFlow와 PyTorch 프레임워크를 활용하여 이미지 학습을 진행하였으며, 이 과정에서 도출한 결과를 비교 분석하여 최적화된 프레임워크을 알 수 있었다.

• Journal of Welding and Joining
• /
• 제25권2호
• /
• pp.49-54
• /
• 2007

Since the wall thickness can be up to 6" or greater, welds must be made in many layers, each layer containing several passes. However, the welding time for the conventional welding processes such as SAW(Submerged Arc Welding) and FCAW(Flux Cored Arc Welding) can be required many hours. The aim of this paper is to develop a high speed welding system with multi-torch and laser vision sensor for increasing the production speed on the line and to remove the need for the operator so that the system can run automatically for the complete multi-torch multi-layer weld. It was shown that the developed laser vision sensor and analysis of arc blow for multi-torch were effective for multi-pass seam tracking and stable arc. A new automated multi-torch welding systems for thick wall applications has been proved in several production lines.

• 한국생산제조학회지
• /
• 제6권2호
• /
• pp.92-101
• /
• 1997

The purpose of this welding process of the exclusive welding-machine using welding torch-rotation type is to develop a mechanism which can solve the problem of twisting of welding wires and cables. The technique was developed by revising the torch position and smooth controlling of both the normal and reverse rotation. Some of the advantages of using the torch-rotation type apply to the work-rotation technique are the practical uses of increased work space and link work with the factory automation system. Do apply the welding process, I designed and made a special unit so called torch part in order to solve the problems of kinematical. And I made a control panel which can manipulate the progress of the entire process at the work shop. Even if it will be applied to another kind of axle casing's welding work, this process can be utilized if other sizes of the fixed pin and work part is produced and changed. The development of this exclusive welding-machine could reduce the manpower of skilled welding labor and increase productivity and better quality product in comparison to the handmade product.

• 대한치과보철학회지
• /
• 제31권2호
• /
• pp.191-205
• /
• 1993

In order to compare the strength of soldered joints relative to the various sol dering method, soldering processes were performed using Palladium based ceramo-metal alloy(Bond-on 4)and Nickel-cromium alloy(Vera Bond). The obtained data include difference in strength between presoldering and postsoldering The data also contain difference among postsoldered groups for 3 difference soldering methods(torch, infrared. Oven) The following results were obtained : 1. For postsoldering with Pd alloy, the oven-using group showed the highest strength while the difference in strength between the torch-using group and the infrared machine group was negligible. 2. For Pd alloy with the torch method, postsoldering resulted in the higher strength than presoldering. 3. There was a negligible difference in strength between presoldering and postsoldering when Ni-Cr alloy with torch method is used. 4. Through microscopic study of the fractured surfaces, the torch-using group showed more porosity than both the oven-using and the infrared machine groups. 5. In terms of fracturing patterns, the oven-using group showed adhesive failure while both the torch and the infrared machine groups showed cohesive failure and cohesive-adhesive failure.

• 대한치과보철학회지
• /
• 제37권6호
• /
• pp.791-799
• /
• 1999

The purpose of this study was to investigate the displacements of cast framework by torch soldering and electric soldering techniques. Specimen had two cylinders and connecting bar that had sectioned with 0.3mm gap at mid point. 10 of total specimens were divided into two groups. In torch soldered group, soldering investment block was made and conventional torch solder-ing procedure was carried out. In electric soldered group, electric soldering was carried out on the master cast without soldering investment block by using electric soldering machine(Dentapunkt DP 7, Kulzer, Germany) After soldering procedure, three dimensional coordinates of two centroids of each cylinder were measured by three dimensional coordinate measuring machine. The intercentroidal displacement and global displacement were calculated and then, these values were compared and evaluated. The results were obtained as follows: 1. Intercentroidal distances of specimens decreased after both soldering procedures, and the decrease in intercentroidal distance was greater for torch soldered group than for electric soldered group 2. Global displacements of torch soldered group were greater than those of electric soldered group.

• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.19-24
• /
• 2010

Five different size of orifice were applied in a constant volume combustion chamber for evaluating the effects of torch-ignition on combustion. The initial flame development and flame propagation were analyzed by the mass burned fraction and combustion enhancement rate. The combustion pressures were measured to calculate the mass burned fractions and the combustion enhancement rates. In addition, the flame propagations were visualized by the shadowgraph method for the qualitative comparison. The result showed that the combustion pressure and mass burned fraction were increased when using the torch-ignition device. The combustion enhancement rates of torch-ignition cases were improved in comparison with conventional spark ignition. Finally, the visualization results showed that the torch-ignition induced faster burn than conventional spark ignition due to the earlier transition to turbulent flame and larger flame surface, during the initial stage.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.48-53
• /
• 2003

원자력발전소로부터 발생하는 비가연성 고체폐기물의 모사시료에 대해 플라즈마 토치를 이용하여 고온용융처리 시험을 실시하였다 실험은 AP-200L 공동형 플라즈마토치를 사용하여 콘크리트, 흙과 금속이 포함되는 혼합물에 대하여 약 50시간 정도 수행되었다. 처리속도, 토치의 노즐과 용융물 표면과 간격, 토치 회전속도, 토치가스 유속 그리고 용융로의 압력 등 몇몇 실험조건을 사전에 결정하였으며, 냉각수 온도, 배가스 온도, 토치출력변화 등 기본 파라메타를 측정하였다. 유리화된 시료는 SEM/EDS로 분석하였다.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3074-3079
• /
• 2009

지속적인 경제 발전과 인구증가로 인하여 에너지 소비가 급증하게 되면서 에너지의 효율적인 사용이 필요하다. 특히 에너지 손실이 많은 건물의 창호에 단열성능이 좋은 고효율 진공유리 사용이 절실한데 아직 가격 및 성능등의 문제로 보급화가 이루어지지 않고 있다. 따라서, 본 연구에서는 저가의 진공유리 개발을 위한 유리 용접용 토치를 설계 및 제작하였다. 연료는 고밀도 열원인 수소-산소 혼합가스를 사용하였고 주로 토치 형상, 노즐 직경, 노즐 배치 등의 최적화를 수행하였다. 끝으로 개발된 토치를 이용하여 두 장의 유리용접을 성공적으로 수행함으로써 저가의 진공유리 개발 가능성을 확인하였다.