• 제목/요약/키워드: topographies

검색결과 85건 처리시간 0.028초

대청댐 유역 상수리나무림의 식물사회학적 특성 (Phytosociological Characteristics of Qeurcus acutissima Forest in Daecheong-dam basin)

  • 김성열;문건수;임성빈;백혜정;송원경;최재용
    • 한국환경복원기술학회지
    • /
    • 제24권2호
    • /
    • pp.85-102
    • /
    • 2021
  • Phytosociological characteristics on Quercus acutissima forests distribution in Daechong-dam basin survey has been carried out using Z.-M. School's methodology and numerical-classification analyses. A total of 43 phytosociological relevés were sampled. Syntaxa were described as Oplismenus undulatifolius-Quercus acutissima community(typicum subcommunity, Phryma leptostachya var. asiatica subcommunity, Ulmus davidiana var. japonica subcommunity), Quercus acutissima community and Quercus variabilis-Quercus acutissima community (typicum subcommunity, Castanea crenata subcommunity). The above three plant communities were classified with species composition reflecting local environmental characteristics of mountain topographies, inclination degrees, and rock exposure rates. Conclusively, those communities were recognized as secondary vegetation affected by high intensity and frequency of human impacts as they inhabited in southward hill lands and low lying grounds in mountains adjacent to human settlements and arable lands. Quercus acutissima community was classified as rural type syntax based on their inlandward distribution and species composition differences from urban forests. Afforest process and natural succession were discussed in relation with habitat environmental elements of Quercus acutissima forest in the survey area.

지형대조항법의 신뢰성 추정을 위한 간섭계 레이더 고도계의 지형 유형별 성능 분석 (Performance Analysis of Interferometric Radar Altimeter by Terrain Type for Estimating Reliability of Terrain Referenced Navigation)

  • 하종수;이한진;이수지;홍성용
    • 한국항공우주학회지
    • /
    • 제50권2호
    • /
    • pp.83-92
    • /
    • 2022
  • 본 논문에서는 지형대조항법의 신뢰성 추정을 위해 지형 유형별로 간섭계 레이더 고도계의 성능을 분석한다. 고도 정확도는 지형대조항법 정확도의 주요 요소 중 하나이다. 그런데 간섭계 레이더 고도계에서는 안테나가 넓은 빔을 가지고 있으면 고도 정확도는 지표의 형상에 의해 직접적으로 영향을 받는다. 따라서 TRN의 정확도와 신뢰성도 영향을 받을 수 있으며 이는 항법해 산출에 모호성을 야기할 수 있다. 본 논문에서는 여러 지형 유형들을 모델링하고 간섭계 레이더 고도계의 성능을 분석하여 지형대조항법의 신뢰성 추정을 위한 분석 자료를 제시한다. 시험 데이터와 비교함으로써 분석 결과의 타당성을 검증한다.

Clinical comparison of marginal fit of ceramic inlays between digital and conventional impressions

  • Franklin Guillermo Vargas-Corral;Americo Ernesto Vargas-Corral;Miguel Angel Rodríguez Valverde;Manuel Bravo;Juan Ignacio Rosales Leal
    • The Journal of Advanced Prosthodontics
    • /
    • 제16권1호
    • /
    • pp.57-65
    • /
    • 2024
  • PURPOSE. The aim of this stuldy was to compare the clinical marginal fit of CAD-CAM inlays obtained from intraoral digital impression or addition silicone impression techniques. MATERIALS AND METHODS. The study included 31 inlays for prosthodontics purposes of 31 patients: 15 based on intraoral digital impressions (DI group); and 16 based on a conventional impression technique (CI group). Inlays included occlusal and a non-occlusal surface. Inlays were milled in ceramic. The inlay-teeth interface was replicated by placing each inlay in its corresponding uncemented clinical preparation and taking interface impressions with silicone material from occlusal and free surfaces. Interface analysis was made using white light confocal microscopy (WLCM) (scanning area: 694 × 510 ㎛2) from the impression samples. The gap size and the inlay overextension were measured from the microscopy topographies. For analytical purposes (i.e., 95-%-confidence intervals calculations and P-value calculations), the procedure REGRESS in SUDAAN was used to account for clustering (i.e., multiple measurements). For p-value calculation, the log transformation of the dependent variables was used to normalize the distributions. RESULTS. Marginal fit values for occlusal and free surfaces were affected by the type of impression. There were no differences between surfaces (occlusal vs. free). Gap obtained for DI group was 164 ± 84 ㎛ and that for CI group was 209 ± 104 ㎛, and there were statistical differences between them (p = .041). Mean overextension values were 60 ± 59 ㎛ for DI group and 67 ± 73 ㎛ for CI group, and there were no differences between then (p = .553). CONCLUSION. Digital impression achieved inlays with higher clinical marginal fit and performed better than the conventional silicone materials.

뇌전도 기반 마우스 제어를 위한 동작 상상 뇌 신호 분석 (Motor Imagery Brain Signal Analysis for EEG-based Mouse Control)

  • 이경연;이태훈;이상윤
    • 인지과학
    • /
    • 제21권2호
    • /
    • pp.309-338
    • /
    • 2010
  • 본 논문에서는 사지가 마비되어 신체를 움직이지 못하지만 뇌의 기능은 살아있는 장애인들을 위하여, 생각만으로 외부의 장치를 제어할 수 있도록 하는 뇌-컴퓨터 인터페이스(BCI: Brain-Computer Interface) 기술을 연구하였다. 신경생리학 분야에서의 연구 결과에 의하면, 신체를 움직이는 상상을 할 경우, 뇌의 운동/감각 피질 영역에서는 $\beta$파(14-26 Hz)와 $\mu$파(8-12 Hz)가 억제/증가되는 ERD/ERS(Event-Related Desynchronization / Synchronization) 현상이 발생한다고 알려져 있다. 본 연구에서는 이를 기반으로 혀, 발, 왼손, 오른손의 동작 상상을 자극으로 이용하여 변화하는 뇌 신호 패턴을 실시간으로 분석하여 피험자의 생각을 읽을 수 있도록 하였으며, 상 하 좌 우의 네 방향으로 이동할 수 있도록 하는 마우스 제어 인터페이스를 구현하였다. 동작 상상 시 발생하는 뇌 신경 활동의 변화를 관측하기 위해서 뇌에 손상을 주지 않으면서도 높은 시간 해상도로 측정이 가능한 비침습적 뇌전도(EEG: ElectroEncephaloGraphy)를 이용하였다. 그러나 뇌전도 신호는 특성상 신호의 크기가 미약하고, 잡음의 영향을 많아 분석이 어렵다. 따라서 이를 극복하기 위해 통계적 방법을 기반으로 한 기계학습 기법인 CSP(Common Spatial Pattern)와 선형판별 분석(Linear Discriminant Analysis)을 이용하여 서로 다른 동작 상상에 의해 발생하는 뇌 신호들 간의 분산이 최대가 되도록 신호를 변환하여 인식 성능을 높일 수 있었다. 또한 분석된 뇌 신호의 시각화를 통해, 기존에 알려진 뇌의 해부학적, 신경생리학적 지식과 일치하는 ERD/ERS 현상이 발생하는 것을 확인할 수 있었다.

  • PDF

울릉도 너도밤나무림의 미세지형별 생태적 특성 (The Ecological Characteristics by Micro-Topographies of Beech forest in Ulleung Island)

  • 한상학;윤충원;송주현;김호진;이정은;윤이슬;유윤서;이상훈
    • 한국환경생태학회지
    • /
    • 제33권6호
    • /
    • pp.686-694
    • /
    • 2019
  • 본 연구는 울릉도 너도밤나무림의 동태변화를 통한 유지기작을 연구하기 위하여 알봉분지에서 성인봉 사이 소능선부, 사면상부 및 계곡부를 포함한 너도밤나무가 우점하는 임분 1ha(20m×20m, 25개소)를 대상으로 흉고직경급 분포, 중요치, 종조성 분석을 통해 미세지형별 너도밤나무림의 임분구조 특성을 파악하기 위하여 실시하였다. 너도밤나무림 전체에서 흉고직경급 10cm 미만에서는 소능선부와 사면상부가 계곡부에 비하여 개체수가 많이 나타났으며, 흉고직경급 10-25cm에서는 소능선부의 개체수가 가장 많이 나타났고, 흉고직경급 25-45cm에서는 사면상부, 45cm 이상의 계곡부의 개체수가 가장 많이 나타났다. 모든 지형에서 흉고직경급 10cm 미만의 너도밤나무가 다수 분포하고 있는 것은 종자번식이 아닌 영양번식 또는 교란에 의한 맹아갱신인 것으로 판단된다. 지표종 분석결과 소능선부에서는 솔송나무, 만병초, 호자덩굴, 섬벚나무, 마가목, 큰두루미꽃 등 8종이, 계곡부에서는 풍게나무, 관중, 난티나무, 섬노루귀, 말오줌나무, 큰연영초, 공작고사리, 황벽나무 8종이 유이하게 나타났다.

Biocompatibility study of lithium disilicate and zirconium oxide ceramics for esthetic dental abutments

  • Brunot-Gohin, Celine;Duval, Jean-Luc;Verbeke, Sandra;Belanger, Kayla;Pezron, Isabelle;Kugel, Gerard;Laurent-Maquin, Dominique;Gangloff, Sophie;Egles, Christophe
    • Journal of Periodontal and Implant Science
    • /
    • 제46권6호
    • /
    • pp.362-371
    • /
    • 2016
  • Purpose: The increasing demand for esthetically pleasing results has contributed to the use of ceramics for dental implant abutments. The aim of this study was to compare the biological response of epithelial tissue cultivated on lithium disilicate ($LS_2$) and zirconium oxide ($ZrO_2$) ceramics. Understanding the relevant physicochemical and mechanical properties of these ceramics will help identify the optimal material for facilitating gingival wound closure. Methods: Both biomaterials were prepared with 2 different surface treatments: raw and polished. Their physicochemical characteristics were analyzed by contact angle measurements, scanning white-light interferometry, and scanning electron microscopy. An organotypic culture was then performed using a chicken epithelium model to simulate peri-implant soft tissue. We measured the contact angle, hydrophobicity, and roughness of the materials as well as the tissue behavior at their surfaces (cell migration and cell adhesion). Results: The best cell migration was observed on $ZrO_2$ ceramic. Cell adhesion was also drastically lower on the polished $ZrO_2$ ceramic than on both the raw and polished $LS_2$. Evaluating various surface topographies of $LS_2$ showed that increasing surface roughness improved cell adhesion, leading to an increase of up to 13%. Conclusions: Our results demonstrate that a biomaterial, here $LS_2$, can be modified using simple surface changes in order to finely modulate soft tissue adhesion. Strong adhesion at the abutment associated with weak migration assists in gingival wound healing. On the same material, polishing can reduce cell adhesion without drastically modifying cell migration. A comparison of $LS_2$ and $ZrO_2$ ceramic showed that $LS_2$ was more conducive to creating varying tissue reactions. Our results can help dental surgeons to choose, especially for esthetic implant abutments, the most appropriate biomaterial as well as the most appropriate surface treatment to use in accordance with specific clinical dental applications.

지형자료의 해상도와 공간보간기법에 따른 다차원 수리모형의 유출 특성 평가 (An Assessment on the Hydraulic Characteristics of a Multi-dimensional Model in Response to Measurement Resolution and Spatial Interpolation Methods)

  • 안정민;박인혁
    • 대한공간정보학회지
    • /
    • 제20권1호
    • /
    • pp.43-51
    • /
    • 2012
  • 수변공간 및 수자원에 대한 효율적 활용 요구가 증대됨에 따라 하천의 수리적인 특성을 보다 정밀하게 모의하고 이를 활용한 의사결정이 필요하다. EFDC 모형은 이러한 의사결정을 지원하기 위한 다차원 수리모형으로 3차원 정밀지형을 활용하여 수체의 수리적인 특성을 분석할 수 있다. 그러나 EFDC 모형의 입력자료로 활용되는 3차원 정밀지형의 경우, 측량간격과 지형보간기법에 의해 많은 영향을 받게 되며 3차원 정밀지형의 변화에 따라 대상 수체의 수리적인 특성이 영향을 받게 된다. 이에 본 연구에서는 다른 측량간격 및 지형보간기법에 따라 도출된 3차원 정밀지형이 EFDC 모형의 모의결과에 미치는 영향을 검토하였다. 연구 대상지역은 낙동강 금호강 유입구간이며, 검토 사상은 2006년 강우사상에 대한 수치모의를 수행하고, 면적-고도 곡선, 수위 및 유속의 모의결과를 비교 분석하였다. 분석결과, 동일한 측량 간격에서는 지형보간기법에 따른 면적고도곡선의 차이는 크지 않았으나, 측량 간격이 160m에서 모든 보간기법에서 차이가 발생하였고 측량간격이 80m 이상이 되면 하상단면의 변화가 발생하였다. 또한, 수위의 경우에 Kriging을 제외한 나머지 기법은 해상도에 따른 차이가 크지 않았고, Kriging은 160m 측량간격에서 다른 기법에 비해 차이가 크게 나타났다. 유속의 경우, 80m 측량간격이상에서 각 보간기법별 차이가 나타나기 시작했으며 160m 측량간격에서 Kriging은 다른 보간기법과 큰 차이를 보이는 것으로 나타났다.

무인잠수정 해미래 활용 동해 저서환경 심해탐사 (Deep-sea floor exploration in the East Sea using ROV HEMIRE)

  • 민원기;김종욱;김웅서;김동성;이판묵;강정훈
    • 한국산학기술학회논문지
    • /
    • 제17권4호
    • /
    • pp.222-230
    • /
    • 2016
  • 국내 심해 저서환경의 접근 한계로 서식생물과 인근환경 연구를 위한 정밀채집이 불가능하였으나, 6,000 미터급 심해 무인잠수정 해미래의 개발로 가능성이 열렸다. 활용가능성 확인을 위해, 2015년 6월에 2주간 동해에서 연구선 온누리호와 무인잠수정 해미래를 이용하여 울릉분지와 후포퇴 사면의 8개 정점에서 심해 종합해양연구를 국내최초로 수행하였다. 수심 범위가 194~2,080m인 조사해역에서 총 10회 잠수를 수행하였고, 잠수시간은 운용조건에 따라 약 1~6시간 소요되었다. 조사 결과, 1) 주요 심해 해저면의 실제 영상, 2) 주요 수산자원인 홍게류의 서식밀도 및 미기록 생물종을 포함한 심해생물상 자료, 3) 해저협곡의 경사면 등 특이 지형 확인, 4) 압력주상채니기를 이용한 퇴적물 주상시료 채집, 5) 육상폐기물 해양 투기현황을 확인 및 획득하였다. 본 탐사결과 심해 저서환경 및 생물의 직접관찰 및 채집이 가능함을 확인하였다.

일본 동양문고(東洋文庫) 소장 한국본 고지도 연구 (The Korean Old Maps in Toyo Bunko, Japan)

  • 양보경
    • 대한지리학회지
    • /
    • 제50권6호
    • /
    • pp.717-734
    • /
    • 2015
  • 일본 최대의 한국본 고서 소장 도서관 중의 하나인 동양문고에는 풍부한 지리 관련 자료가 소장되어 있다. 지리지(地理志)의 편찬과 개선방안을 기록한 "기인한상량 杞人間商量"을 비롯해 다수의 군현읍지들, 조선후기 도로와 유통의 발달을 반영한 도로망을 기록한 "해동도리표" 등 다양한 조선시대의 지리 자료들이 소장되어 있다. 동양문고 소장 지도와 지리지 중에는 한국에 소장본이 확인되지 않은 유일본들이 다수 포함되어 있어 중요한 지리학적 가치를 지닌다. 특히 지도 중에는 고산자 김정호의 "대동여지도" 6종을 비롯해 매우 중요한 고지도들이 소장되어 있다. 마에마 교사쿠(前間恭作)의 소장인이 찍힌 고산자 김정호의 "대동여지도"와 "수선전도", 시데하라 다이라(幣原坦) 소장본이었던 20리 방안지도인 "강역전도"와 10리 방안지도인 "동여도", 정상기의 "동국지도" 유형의 매우 훌륭한 팔도의 도별 지도인 "근구팔역 槿邱八幅", 해주신본 계열의 "좌해지도 左海地圖", 특히 함경도와 평안도의 병마절도사를 지낸 이삼(李森)의 서문이 기록된 북방 국경지역 지도인 "관북지도 關北地圖" 등은 조선의 지도 중 역사적 가치를 지니는 자료를 선별하는 안목을 지닌 수집가에 의해 소장된 자료임을 보여주는 대표적인 지도들로서, 한국의 지도학 발달사를 보충할 수 있는 중요한 자료들이다.

  • PDF

GIS를 이용한 3차원 지형도 생성 및 정확도 분석 (3dimension Topography Generation and Accuracy Analysis Using GIS)

  • 임영빈;박창숙;이철희
    • 한국측량학회지
    • /
    • 제23권2호
    • /
    • pp.189-196
    • /
    • 2005
  • 최근 지도제작 기법의 발달과 기 제작된 종이 및 수치지도의 보급이 활발해짐에 따라 2차원 형태의 지형도보다 지형을 보다 사실감 있게 표현하는 3차원 지형도에 대한 요구가 증가되고 있다. 본 연구 는 기존의 국가기본도 중 축척 1:25,000 종이지형도와 수치지도의 지형정보들을 이용하여 3차원 지형도를 생성하였으며, 3차원 지형도의 정확도분석 결과 1:25,000 국가기본도 허용오차 범위에 포함되어 그 활용가능성을 입증하였다. 3차원 지형도의 정확도를 분석하기 위하여 좌표 변환된 국가기본도의 이미지와 동일도엽의 수치지도상의 각종 지물지모들간의 평면 위치오차 및 수직 위치오차를 레이어별로 분석하여 정확도를 평가한 결과 영상자료의 좌표변환시 이용되는 변환 프로그램뿐만 아니라 보정방법에 따라서도 위치오차가 상이함을 알 수 있었다. 좌표 변환된 영상자료의 평면정확도는 지상거리 ${\pm}4.1m$로 1:25,000의 수치지도 허용범위를 만족하였다. 따라서 기 제작된 다양한 축척의 국가기본도와 수치지도를 이용하여 신속하고 효율적으로 3차원 지형도를 제작할 수 있으며, 향후 기존 지형도 및 수치지도를 이용한 입체지형도의 활용가능성이 기대된다.