• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.128-134
• /
• 2013

In the summer season (June~August) during the study period of Lake Doam, average concentrations of major water quality parameters, COD, SS, TN, and TP were 4.0, 16.2, 3.129 and $0.077mg\;L^{-1}$, respectively, and Chl-a was $11.8mg\;m^{-3}$. The result has indicated that Lake Doam was a meso-eutrotrophic lake. Lake Doam data from the summer season (June~August), precipitation from 2001 to 2012, and water quality (COD, SS, TN, TP, Chl-a etc.) of seven years (2001, 2002, 2004 and 2009~2012), were statistically analyzed for long-term trends by Mann-Kendall test and Sen's slope estimator methods. The statistical results showed that precipitation, SD, COD, TN, $NO_3-N$, $NH_3-N$ and Chl-a had decreasing trends, and EC, turbidity, SS, TP and DIP had increasing trends. Suspended solids and total phosphorus were directly affected by precipitation. In the case of suspended solids, more aggressive and constructive plans need to be implemented than the current turbidity reduction project to achieve the targeted water quality ($5mg\;L^{-1}$ of SS) in Lake Doam. In particular, we need to specify a project that considers the steep topographic characteristics of high, land farming areas and precipitation conditions of the Lake Doam watershed, which can increase the efficiency of a turbidity reduction project.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.3
• /
• pp.3-9
• /
• 2013

As interest in green growth picks up, the importance of bicycles which are an environment friendly means of communication has been magnified. However, bicycle routes which are the base of bicycles are designed without considering topographic elements and thus many users are experiencing inconvenience in using bicycles. The present study presents a routing technique to select optimal routes when selecting routes in commuting to school utilizing bicycles. To this end, a formula for optimum route calculation considering slope and intersections was drawn and a method to select optimum routes by applying modified Dijkstra Algorithms was studied. According to the results, the bicycle routes for commuting to school should be selected by the shortest time rather than the shortest distances to the destination, because it required reach the destination faster. Therefore when selecting the routes, it must be based on the shortest time considering waiting time due to crosswalks or crossroads and speed variations due to slopes.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.2
• /
• pp.104-111
• /
• 1990

The water level variation due to the Typhoon around the coast of Pusan in the southern sea of Korea is investigated from the observed tidal record. Water level variations at six stations along the coast are discussed in association with the meteorological data. The characteristics of storm surge at Pusan during Typhoon Thelma in 1987 is analysed using the observed data, and it is performed the numerical simulation of storm surge which includes a inverse barometric effect due to the horizontal distribution of sea sur-face pressure. From the calculation results, the peak value of storm surge in the coast of Pusan was occur-red around the 01：00 July 16th, which is well coincident with the observed water level variation at the Kadukdo. However, the calculated value at the Pusan TBM is inconsistent with the observed one, which is regarded due to a reason that the Tidal Bench Mark (TBM) locates in the channel. In the computation results, the maximum surge occurs at the coast of Nakdong estuary, which is considered primarily due to a topographic effect, and water level variation exceeded 2.5 meter in these areas while only about 60 cm in another coasts.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.498-504
• /
• 2014

PURPOSE. Dental implant has gained clinical success over last decade with the major drawback related to osseointegration as properties of metal (Titanium) are different from human bone. Currently implant procedures include endosseous type of dental implants with nanoscale surface characteristics. The objective of this review article is to summarize the role of nanotopography on titanium dental implant surfaces in order to improve osseointegration and various techniques that can generate nanoscale topographic features to titanium implants. MATERIALS AND METHODS. A systematic electronic search of English language peer reviewed dental literature was performed for articles published between December 1987 to January 2012. Search was conducted in Medline, PubMed and Google scholar supplemented by hand searching of selected journals. 101 articles were assigned to full text analysis. Articles were selected according to inclusion and exclusion criterion. All articles were screened according to inclusion standard. 39 articles were included in the analysis. RESULTS. Out of 39 studies, seven studies demonstrated that bone implant contact increases with increase in surface roughness. Five studies showed comparative evaluation of techniques producing microtopography and nanotopography. Eight studies concluded that osteoblasts preferably adhere to nano structure as compared to smooth surface. Six studies illustrated that nanotopography modify implant surface and their properties. Thirteen studies described techniques to produce nano roughness. CONCLUSION. Modification of dental osseous implants at nanoscale level produced by various techniques can alter biological responses that may improve osseointegration and dental implant procedures.

• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.611-622
• /
• 2000

In this study, MODFLOW model is used to analyze the groundwater flow system of Seoguipo area in Cheju island, The final parameters of permeability coefficient and storage coefficient of target area can be obtained by trial and error method using the measured data of pumping rate as initial values. And it is found that the applicability for groundwater flow system is reflected well from the simulation result of the model. Seoguipo area spring water is thought to appear by relatively stable groundwater recharge below EL. 400m according to head distribution through the analysis of observed data considering topographic and geological characteristics, Lee's study(996), and the simulation result. Also it is known that point II, III, and VI show relatively large velocity vectors, and groundwater flows through the movement path which is distributed in various directions of I, II, III, IV, V, VI, and VIl form the result of velocity vector analysis using head distribution result values to analyze the groundwater flow path under unsteady flow condition.dition.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.29-40
• /
• 2002

In photogrammetry, the accuracy is analyzed by using the coordinate of the targeted position determined by the geometric principle, thus, the reliability depends on the accuracy of the coordinate of the targeted position. Thereby, geographic surveying is essential to perform such tasks, and it requires approximately $30{\sim}50%$ of total cost and times to produce a finalized map. The main purpose of this study is to determine the configuration of the disposition of minimum datum points and their configuration, which were determined by surveying values available through using the structure of block model based on the aerotriangulation. ortho projection image was produce and digital topographic map was achieved by the optima model(CASE7). We also performed comparative analysis about the result of local datum point and the accuracy of overlapping based on the surveying results. Consequently, it is possible to analyze the unknown position accurately with the optimal model., CASE 7, which is the minimum datum points configuration required to block adjustment. Furthermore, this optimal model, which provides the minimum datum points, results costs and time saving effects compared to the previous methodology.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.2
• /
• pp.37-46
• /
• 2004

In order to decrease the area damaged by forest fires and to prevent the occurrence of forest fires, we are making an effort to improve prevention measures for forest fires. The objective of this study is to classify hazard regions where forest fires occur based on the factors that contribute to the occurrence of forest fires. Forest fire sites in the Uiseong-gun, Gyeongsangbuk-do were surveyed according to the factors of forest type and topographic characteristics where the forest fires occurred. We used a correlation analysis to determine the forest fire occurrence factors and a conditional probability analysis and GIS to determine a forest fire danger index. The resulting forest fire danger index was used in the classification of forest fire occurrence risk regions.

• Journal of the Korean Geographical Society
• /
• v.38 no.1
• /
• pp.70-86
• /
• 2003

This study aimes to describe the forms and characteristics of Myungdang tomb sites in Andongs Area by conducting field trips and analyzing on topographic maps. Most Myundang sites are concentrated around hills, mountains, and tributaries that collectively are located in a northern parts of Nakdong river. The river and the mountain, which the principle of Pungsu, so called Jangpung and Duksu, is applied to, constitute the various forms. They provide the sites with physical settings for Myungdang that can be said to commonly retain such properties as semi-openness, multi-surroundedness, stability, harmony, balance. It can be further argued that those properties of Myungdang sites offer criteria for human settlement and sustainable land development in the current world.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1860-1866
• /
• 2016

Helicopter-related collision accidents with structures mostly occur at landing, especially in a limited visibility environment, which necessitates some secondary equipment like a radar that can generate stationary clutter image. In this paper, we propose an algorithm that makes an image of stationary ground clutter in two dimensional range and azimuth angle domain. We present a mathematical model for the received signals from each clutter patch in the iso range ring and analyze their clutter and Doppler characteristics, assuming that a helicopter-borne radar has a rotational antenna. We propose a filter structure, which suppresses side lobe signal components while extracting a main lobe signal component, and suggest a solution for a problem stemmed from the filtering process. Finally, by conducting a simulation we show the performance of the suggested imaging algorithm on a two dimensional virtual scenario of the topographic clutter.

• Journal of Korea Water Resources Association
• /
• v.35 no.4 s.129
• /
• pp.345-358
• /
• 2002

The flow apportioning algorithms with digital elevation models have been developed to reflect reasonable flow divergence properties but they showed several defects related to the connectivity of channel cells, various divergence features along to local topography and channel cells' size etc. Topographic data used by existing flow apportioning algorithms are flow accumulation area and local slope. However, the size and location of channel cells which play the dominant role in the flow pathway were not properly considered. Therefore, a new flow apportioning algorithm considering various flow divergence characteristics in the complicate terrain is proposed. The GA optimization scheme is used to represent the location and scale of the channel pixel. Improved result can be obtained by using both a new flow apportioning algorithm and optimization.