• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.1035-1038
• /
• 2002

The electrical properties of Porous polycrystalline silicon Nano-Structure (PNS) as a cold cathode were investigated as a function of anodizing condition, the thickness of Au film as a top electrode and the substrate temperature. Non-doped 2${\mu}m$-polycrystalline silicon was electrochemically anodized in HF: ethanol (=1:1) mixture as a function of the anodizing condition including a current density and anodizing time. After anodizing, the PNS was thermally oxidized for 1 hr at 900 $^{\circ}C$. Then, 20nm, 30nm, 45nm thickness of Au films as a top electrode were deposited by E-beam evaporator. Among the PNSs fabricated under the various kinds of anodizing conditions, the PNS anodized at a current density of 10mA/$cm^2$ for 20 sec has the lowest turn-on voltage and the highest emission current than those of others. Also, the electron emission properties were investigated as functions of measuring temperature and the different thickness of Au film as a top-electrode.

• ETRI Journal
• /
• 제45권6호
• /
• pp.1056-1064
• /
• 2023

The optical properties of the materials composing organic light-emitting diodes (OLEDs) are considered when designing the optical structure of OLEDs. Optical design is related to the optical properties, such as the efficiency, emission spectra, and color coordinates of OLED devices because of the microcavity effect in top-emitting OLEDs. In this study, the properties of top-emitting blue OLEDs were optimized by adjusting the thicknesses of the thin metal layer and capping layer (CPL). Deep blue emission was achieved in an OLED structure with a second cavity length, even when the transmittance of the thin metal layer was high. The thin metal film thickness ranges applicable to OLEDs with a second microcavity structure are wide. Instead, the thickness of the thin metal layer determines the optimized thickness of the CPL for high efficiency. A thinner metal layer means that higher efficiency can be obtained in OLED devices with a second microcavity structure. In addition, OLEDs with a thinner metal layer showed less color change as a function of the viewing angle.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.313-316
• /
• 2012

In this study, the combustion and emission characteristics of waste cooking oil biodiesel was investigated. The fuel was injected from 5 CAD (Crank angle degree) ATDC (After top dead center) to -60 CAD ATDC by 5 CAD with 800 bar and 1600 bar injection pressure. Generally, the hydrocarbon, carbon monoxide and smoke emissions from biodiesel fuel were lower than the emission levels of diesel fuel. However, the emission characteristic of biodiesel got worse than diesel when the fuel was injected earlier than -30 CAD ATDC. $NO_x$ emission from biodeisel was higher than diesel fuel in all experimental conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.43-46
• /
• 2007

Though bottom emission AM-OLED has advantages in respect of mass production, the bottom emission type is underrated due to its low aperture ratio and low color gamut, compared with top emission type. In this paper, we demonstrate that the color gamut up to 89 % can be simply achieved by depositing dielectric multilayers, whose thicknesses are determined using an optical simulation program, prior to formation of Si layer.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.289-294
• /
• 2006

Interior finishing materials are known as main VOCs and formaldehyde emission sources in residential buildings. The interior finishing materials are usually comprised of several layers with different emission properties, which complicates the emission patterns of the finishing materials. Thus, experiments on composite finishing materials and each of layers are needed to understand the emission characteristics of interior finishing materials. Results indicate that composite finishing materials have the various emission characteristics according to compositions of the materials and kinds of contaminants. Mostly, the emission rates of composite materials are higher than that of the single layer materials. The main reason is assumed to be rapid diffusion of contaminants from the bottom layer material into the top layer material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.450-450
• /
• 2006

Organic light-emitting diodes (OLED) as pixels for flat panel displays are being actively pursued because of their relatively simple structure, high brightness, and self-emitting nature [1, 2]. The top-emitting diode structure is preferred because of their geometrical advantage allowing high pixel resolution [3]. To enhance the performance of TOLEDs, it is important to deposit transparent top cathode films, such as transparent conducting oxides (TCOs), which have high transparency as well as low resistance. In this work, we report on investigation of the characteristics of an indium tin oxide (ITO) cathode electrode, which was deposited on organic films by using a radio-frequency magnetron sputtering method, for use in top-emitting organic light emitting diodes (TOLED). The cathode electrode composed of a very thin layer of Mg-Ag and an overlaying ITO film. The Mg-Ag reduces the contact resistivity and plasma damage to the underlying organic layer during the ITO sputtering process. Transfer length method (TLM) patterns were defined by the standard shadow mask for measuring specific contact resistances. The spacing between the TLM pads varied from 30 to $75\;{\mu}m$. The electrical properties of ITO as a function of the deposition and annealing conditions were investigated. The surface roughness as a function of the plasma conditions was determined by Atomic Force Microscopes (AFM).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2005년도 제28회 학술발표회 초록집
• /
• pp.104-104
• /
• 2005

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제24회 학술발표회 초록집
• /
• pp.130-130
• /
• 2003

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.153-159
• /
• 2004

The purpose of this research is to investigate the performance of swirl combustion chamber diesel engine by changing the jet passage area, the depth and shape of the piston top cavity (main chamber). The performance of diesel engine with newly changed swirl combustion chamber was tested through the experimental conditions as engine speed, load and injection timing etc. The test results were compared and analyzed. And another purpose of this research is to make a new diesel engine that is satisfied fuel consumption and regulation value of exhaust gas. 1. The rate of fuel consumption was affected significantly by the jet passage area at the high speed and load than low speed and low load. The influence of jet passage large area was proven to decrease the rate of fuel consumption. 2. Smoke was affected significantly by the depth of the piston top cavity, but exhaust temperature and the rate of fuel consumption wasn't affected. The rate of fuel consumption was affected by changing injection timing. 3. The rate of fuel consumption, exhaust temperature and Smoke were affected significantly by the shape of the piston top cavity from rectangular to trapezoid. That is we have all high value. The exhaust smoke density and exhaust gas temperature depended sensitively on variation of the injection timing rather than the shape of the combustion chamber within the experimental conditions. 4. We made a new diesel engine that is satisfied design target values(sfc=190 g/hr, NOx + THC=6.0 g/KWh, PM=0.3 KWh), the rate of fuel consumption and emission standard etc., through changing injection timing at the maximum torque point and rated power point. Although we have a little high NOx value.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권4호
• /
• pp.251-259
• /
• 2022

This study investigates the impact of ownership structures and audit quality on carbon emission disclosure. It also examines how audit quality affects the relationship between ownership structures and carbon emission disclosure. This research includes 106 standalone sustainability reports from non-financial companies that were listed on the Indonesia Stock Exchange (IDX) between 2015 and 2018. Our findings show that family and concentrated ownerships convey less information about carbon emissions. Our results fail to demonstrate that disclosure of carbon emissions could be a corporation's approach to respond to stakeholder pressure and public visibility and to provide legitimacy for its existence. We also find a positive and significant association between high-quality (Big4) auditors and carbon emission performance. Our further result suggests that Big4 auditors seem to compromise their high standard quality on auditing family and concentrated ownership firms. They fail to influence their family and concentrated ownership clients to be socially responsible. Policymakers should support the existence of Big4 auditors as a driver of carbon emission performance. Top management should be proactive to tackle carbon emission issues by adopting stakeholder-driven mechanisms and establishing legitimacy with society. Nevertheless, the involvement of family and highly concentrated shareholders in decision-making processes and information disclosure should not be encouraged.