• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.165-176
• /
• 2014

Purpose: The effects of desensitizing agent are often for a short duration. One of the reasons is believed to be wear of desensitizing agent by tooth brushing. To reduce the wear and make the duration longer, dental bonding resin was applied and the changes of dentin permeability after toothbrushing were measured. Materials and methods: Extracted teeth free from caries were chosen. Coronal dentin discs with thickness of 1 mm were prepared. Using the split chamber device developed by Pashely, hydraulic conductance and scanning electron microscope images (SEM) were compared and contrasted before and immediately after the application of desensitizing agent and bonding resin and then after equivalent tooth brushing of 1 week, 2 weeks, and 6 weeks. Four commercially available desensitizing agents were used in this study; they were All-Bond 2, Seal & Protect, Gluma, and MS Coat. And Dentin/Enamel Bonding resin (Bisco Inc.) was used. The results of this study are as follows. Results: On all specimens, the hydraulic conductance decreased after the application of tooth desensitizing agent and bonding resin. Compared with the specimens treated only with desensitizer, the specimens treated with All-Bond 2, Gluma, MS Coat and plus D/E bonding resin had a little increase in hydraulic conductance after 1, 2 and 6-week tooth brushing. In case of Seal & Protect, the specimens showed the same result only after 6-week tooth brushing. On examination of SEM, the dentinal tubule diameter had decreased after treatment of desensitizing agents and bonding resin. And the specimens treated with All-Bond2, Seal&Protect, Gluma, MS Coat and plus D/E bonding resin had an significant decrease in diameter of dentinal tubule after 6-week tooth brushing. Conclusion: According to the results of this study, it is effective to use bonding resin after application of desensitizer in reducing the wear by tooth brushing and making the duration longer. In this study, just 6-week tooth brushing was performed, and it is not enough to regard it as a long-term data. So further study is needed and more perfect method for treating dentin hypersensitivity should be developed.

• The korean journal of orthodontics
• /
• v.17 no.1
• /
• pp.85-91
• /
• 1987

The aim of this study was to clarify whether bonding/debonding procedure will affect the occurance of enamel crack. The frequency of enamel crack was compared between before-bonding and after-debonding on 200 human extracted teeth. Each facial surface of the tooth was divided in 9 fragments. A presence of crack, which was classified by its direction as vertical, horizontal and oblique crack, was surveyed in each fragment. Number of all cracks in facial surface was 1355 at before-bonding, and 1605 at after-debonding, so it revealed significant increase rate of $18.5\%$, but compared by fragment, cracks were significantly Increased in OC, OD, CC and GC fragments. All kinds of cracks were significantly increased, especially increase rate of oblique crack reached $54.9\%$. The increase rate of cracks was not superior at any fragment or region, but some evidence was seen in CC fragment. Judging from the above, increase of crack is unavoidable with bonding/debonding procedures.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.560.2-560
• /
• 2001

Dental caries is a chronic disease that causes the destruction of tooth structure by the interaction of plaque bacteria, food debris, and saliva. There has been attempts to induce remineralization by supersaturating the intra-oral environment around the surface enamel, where there is incipient caries. In this study, supersaturated remineralized solution was applied to specimens with incipient enamel caries, and the quantitative analysis of remineralization was evaluated using microradiography.(omitted)

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.284-291
• /
• 2011

Numerical experiments on biological interfacial layer, DEJ by finite element software ABAQUS have been conducted to study its fracture behavior including crack bridging / arresting characteristics in the model. Crack growth simulation has been carried out by numerical tool, XFEM, devoted to study cracks and discontinuities. The fracture toughness of DEJ has been estimated before and after crack bridging. The implications of bridging in numerical study of fracture behavior of DEJ-like biological interface have been discussed. It has been observed that the results provided by the numerical studies without proper accommodation of bridging phenomenon can mislead. This study can be helpful for understanding the DEJ-like biological interface in terms of its fracture toughness, an important material characteristics. This property of the material is an important measure that has to be taken care during design and manufacturing processes.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.290-295
• /
• 2011

During tooth formation, tooth development can be affected by physical action or metabolic changes around dental follicle. Especially trauma to primary dentition is the most representative physical factor that can cause development disorders of succedaneous tooth. Enamel hypoplasia and crown discoloration of succedaneous tooth are common complications of trauma. And impaction, ectopic eruption, arrest of root formation and root dilaceration of succedaneous tooth are rare. In this case, a 6-year and 5-month-old female patient visited for dental evaluation after trauma. She was diagnosed with alveolar bone fracture near upper front teeth, extrusion of the upper right and left primary central incisors, intrusion of the upper right primary lateral incisor, and palatal luxation of the upper left primary lateral incisor. Upper right and left primary central incisors with severe mobility were extracted, with gingival suture on the day of the visit. During 24 months check up, root dilacerations were found near the cemento enamel junction in the upper lateral incisors and arrests of root formation were found on the coronal 1/3 of the root in the upper central incisors. Although alveolar bone fracture is rare type of trauma in children, a thorough examination of alveolar bone is essential for prognosis and following treatment in patients with trauma.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.291-316
• /
• 1993

Restorative procedures can lead to tooth fracture due to the relatively small amount of the remaining tooth structure. It is essential to prevent fractures by having a clear concept of the designs for cavity preparations. Among the several parameters in cavity designs, profound understanding of isthmus width factor would facilitate selection of the appropriate cavity preparation for a specific clinical situation. In this study, MO amalgam cavity were prepared on maxillary first premolar and filled with amalgam. Three dimensional, model with 1365 8-node brick elements was made by serial photographic method. In this model, isthmus was varied in width at 1/4, 1/3, 1/2 and 2/3 of intercuspal width and material properties were given for three element groups, i.e., enamel, dentin and amalgam. A load of 500 N was applied vertically on amalgam and enamel. In case of enamel loading, 2 model (with and without amalgam) was compared to consider the possibility of play at the interface between tooth material and amalgam. These models were analyzed with three dimensional finite element method. The results were as follows: 1. The stress was concentrated on the facio-pulpal line angle and distal marginal ridge of the cavity. 2. With the increase of the isthmus width, the stress spread around the facio-pulpal line angle and the area of stress concentration moved toward the proximal box. 3. In case of narrow isthmus width, the initiation point of crack would be in the area of isthmus corner of the cavity, and with the increase of the isthmus width, it would move toward the proximal box and at the same time the possibility of crack increase at the distal marginal ridge. 4. The direction of crack progressed outward and downward from the facio-pulpal line angle, and with the increase of the isthmus width, it approximated vertical direction. At the marginal ridge, it occurred in vertical direction. 5. It would be favorable to make the isthmus width narrower than a third of the intercuspal width, and to cover the cusp if isthmus width were wider than half of the intercuspal width. 6. It is necessary to apply the possibility of play to the finite element analysis.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.470-488
• /
• 1996

The end products of the metabolism of the oral microorganism, organic acids, are an element that produces dental caries. Four organic acids in plaque fluid, lactic acid, acetic acid, succinic acid, propionic acid which take the important role in producing dental caries, were chosen to evaluate the effect of acid type and concentration. The subject, $100{\mu}m$ in thickness, were immersed in acid-buffer solution which has the different acid concentration of 10mM, 25mM, 50mM, 100mM and pH 4.3 and degree of saturation was $0.153{\pm}0.003$ kept in constant and were operated to produce artificial caries under different demineralization time (1, 2, 3 day) at x25. The results were obtained by observing under polarizing microscope at x25. 1. The subsurface lesion, specific finding of incipient enamel caries, showed positive birefringence. but surface zone and sound enamel showed negative birefringence. 2. The demineralization rate of enamel was increased as the acid concentration increased. 3. The subsurface lesion showed increasing depth in the order of lactic, acetic, propionic acid, succinic acid. 4. The concentration of organic acid in artificial caries system had an independent effect on demineralization rate in enamel under the constant pH and degree of saturation. The result of this study showed that not only pH and the acid strength but the concentration of organic acid had an independent effect on demineralization rate in early enamel caries. And through the further research on the factors influencing enamel demineralization, it will be necessary to develop an effective caries preventive therapy.

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.173-178
• /
• 1988

The purpose of the study was to confirm the influence of fluoride to enamel decalcification. Specimens were prepared from 20 extracted teeth. Every tooth was sliced into 4 pieces by means of seperating disc. The pieces with sound enamel were distributed to 4 groups. 1st group was treated with 0.5% NaF solution for 2 minutes. 2nd group was treated with 0.5% NaF solution for 10 minutes. 3rd group was treated with 1% NaF solution for 2 minutes. 4th group was treated with 1% NaP solution for 10 minutes. The enamel surface of each specimen were decalcified with 30% $H_3PO_4$ for 2 minutes and the findings through electron microscope were as follows; 1. The degree of decalcification on the 1st group was greater than that of the 2nd group. 2. Roughness of the 3rd group was slightly higher than that of the 4th group. 3. Under the same procedure of decalcification, the specimen treated by higher conceutration of NaF solution for same length of time showed less decalcified picture. 4. Under the same procedure, of decalcification, the specimens treated by same concentration of NaF solution for different length of time, were compared and found longer the time less decalcified.

• KSBB Journal
• /
• v.8 no.2
• /
• pp.126-132
• /
• 1993

The objective of this study was to develop an artificial dentin for easy handle and accurate observation of the mechanism on dental caries and to screen biologically active materials from the extracts of traditional plants and fruits for prevention of early dental cares. In order to produce disc PAHA (artificial dentin), the powdered hydroxylapatite was immobilized in a 20% polyacrylamide gel. The characteristics of disc PAHA was very similar to the surface, figure and lattice of human enamel. After decalcification in 0.1M citric acid based on observation with SEM. The critical point of decalcification of disc PAHA by acids was found to be pH 5.0-5.5, which was hi agreement with human enamel. The degree of decalcification from disc PAHA in 0.1M citric acid solution was sixfold higher than that of human enamel. This result suggested that disc PAHA would be useful as a substitute of human enamel for in vitro experiment. The extracts of garlic and Flower Apple A, B seemed to inhibit growth of S. mutans. Especially, when the 300$\mu\ell$ of its extracts added to the medium to incubate S. mutans, F. apple B showed strongly an inhibitory effect in both the growth of S. mutans and the synthesis of insoluble glucan.

• Restorative Dentistry and Endodontics
• /
• v.43 no.2
• /
• pp.20.1-20.9
• /
• 2018

Objectives: The aim of this in vitro study was to evaluate the bond strength of 2 universal adhesives used in different application modes to bleached enamel. Materials and Methods: Extracted 160 sound human incisors were used for the study. Teeth were divided into 4 treatment groups: No treatment, 35% hydrogen peroxide, 16% carbamid peroxide, 7.5% carbamid peroxide. After bleaching treatments, groups were divided into subgroups according to the adhesive systems used and application modes (n = 10): 1) Single Bond Universal, etch and rinse mode; 2) Single Bond Universal, self-etch mode; 3) Gluma Universal, etch and rinse mode; 4) Gluma Universal, self-etch mode. After adhesive procedures nanohybrid composite resin cylinders were bonded to the enamel surfaces. All specimens were subjected to shear bond strength (SBS) test after thermocycling. Data were analyzed using a 3-way analysis of variance (ANOVA) and Tukey post hoc test. Results: No significant difference were found among bleaching groups (35% hydrogen peroxide, 16% carbamid peroxide, 7.5% carbamid peroxide, and no treatment groups) in the mean SBS values. There was also no difference in SBS values between Single Bond Universal and Gluma Universal at same application modes, whereas self-etch mode showed significantly lower SBS values than etch and rinse mode (p < 0.05). Conclusions: The bonding performance of the universal adhesives was enhanced with the etch and rinse mode application to bleached enamel and non-bleached enamel.