• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.161-168
• /
• 2010

RFID has been used as an identification tool substituting bar-code and its application areas are increasing due to its suitability in ubiquitous environment. This paper reviews RFID applications in some areas in which a serious amount of applications were reported such as material handling, physical distribution, and supply chain management of perishable products. The authors try to suggest research issues along with the limitations of RFID.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.117-122
• /
• 2002

Electrical discharge machining uses thermal energy from electrical discharge, while wire electrical discharge machining (WEDM) technology is widely used in conductive material machining. This paper proposes a method for evaluating the characteristics of wires in WEDM. In order to evaluate the wire processing performance, processing speed and roughness, straightness, corner processing have been assessed with precision experiment equipment and image processing including Laplacian filtering with various threshold levels.

• Electrical & Electronic Materials
• /
• v.5 no.1
• /
• pp.1-7
• /
• 1992

유한요소법은 거의 모든 물리계를 대상으로 특정범위의 해석을 할수있는 방법이며 이에 경계요소법등을 보강하면 각종 센서류등으로만 측정이 가능한 여러가지 고체역학적측정, 유체역학적측정, 전자계적측정 및 물성적측정등을 몇가지의 관련 데이타를 가지고 수행할 수 있는 Tool을 만드는데 주도적 역할을 할 것으로 사료된다. 그리고 실제로 유한요소법을 기초로한 유용한 Simulator들이 실용화되어 있는 실정이며 특히 물성계를 해석하는 Simulator의 개발이 미개척분야로 남아있어 첨단 신소재 개발분야에 대한 연구가 요구된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.89-98
• /
• 1991

In this paper, several numerical examples are analyzed and the results are compared with those from other reseachers to verify the applicability and the validity of the geometric and material nonliner analysis method of reinforced concrte shells refered to the paper ( ). As a results, this method is a useful tool to account for geometric and material nonlinearities in detailed analysis of reinforced concrete shells of general form.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.289-289
• /
• 2009

The series hybrid propulsion system in bimodal tram consists of CNG engine, generator, inverter, motor and battery as main components. Among them, battery is very important thing to make a hybrid bimodal tram more efficient in driving. Battery pack is composed of 168 LPB(lithium polymer battery) cells, 650Vdc-300A. LPB should be treated with a good consideration in both temperature and overvoltage. This paper had analyzed and investigated the thermal flow and distribution of LPB module(l4 LPB cells) and Pack in simulated environments by commercial thermal analysis tool.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.148-155
• /
• 2020

This study investigated learners' perceptions of using self-generated listening materials based on Text to Speech. After taking an online training session to learn how to make listening materials for extensive listening practice outside the classroom, the learners were engaged in practice with self-generated listening materials for 10 weeks in a self-directed way. The results show that a majority of the learners found the TTS-based listening materials helpful to reduce anxiety toward listening and enhance self-confidence and motivation, with a positive effect on improving their listening ability. The learners' general satisfaction can be attributed to some beneficial features of TTS-based listening material, including freedom to choose what they want to learn, convenient accessibility to the material, availability of various native speakers' voices, and novelty of digital tools. This suggests that TTS-based digital listening materials can be a useful educational tool to support learners' self-directed listening practice outside the classroom in EFL settings.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.8
• /
• pp.759-765
• /
• 2005

In this paper, developed isolator for gap filler is analyzed and designed using the simulation tool. Using the designed parameters, isolator is fabricated and tested in gap filler band. Temperature characteristics of isolator depend on magnet, YIG ferrite, and conductor etc. These require temperature stability and possible method of compensation for the temperature dependent effects. The temperature stabilization tries to use Ni-alloy. Developed isolator that compare with room temperature and high temperature characteristics has change fewer than 20 MHz. Implemented isolator shows more than 20 dB isolation characteristic at center frequency(2,650 MHz) and has 0.2 dB insertion loss in overall 100 MHz operating bandwidth. Return losses of input and output port are measured below -20 dB.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.988-994
• /
• 1998

In the manufacturing of vitreous bonded CBN tool the porosity change associated with various processing conditions, I. e. the sintering temperature and the size and the amount of abrasive grits was observed. In the case of sintering of vitreous bond material only the specimen density reached the maximum at 950$^{\circ}C$ and then the total porosity was increased slightly with the temperature above 950$^{\circ}C$. In the sintering of a-brasive grits and the vitreous bond material together a marked increase in the total porosity was found with the temperature above 950$^{\circ}C$ Reducing the grit size at the constant volume fraction of abrasive grits showed an increase in the total porosity at whole sintering temperature. On the contrary. it was observed that increasing the volume fraction of abrasive grits with a same size showed the increased open porosity simultaneously with decreased closed porosity at whole sintering temperature.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.70-73
• /
• 2001

The layup optimization by genetic algorithm (GA) for the interlaminar strength of laminated composites with free edge is presented. For the calculation of interlaminar stresses of composite laminates with free edges, extended Kantorovich method is applied. In the formulation of GA, repair strategy is adopted for the satisfaction of given constraints. In order to consider the bounded uncertainty of material properties, convex modeling is used. Results of GA optimization with scattered properties are compared with those of optimization with nominal properties. The GA combined with convex modeling can work as a practical tool for maximum interlaminar strength design of laminated composite structures, since uncertainties are always encountered in composite materials and the optimal results can be changed.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.88-93
• /
• 2001

As the development of High Speed Machining, It is applied in many fields of manufacturing. Among them is to manufacture die and mold. But it still remains as a hard-to-work to apply it in machining pre-hardened materials such as hardened QRO90. It also difficult to machine new materials because there is no machining date of them. Therefore, in this study, we are trying to improve the machinability of new material, QRO90 by applying various cutting conditions, and selecting the best condition which not only reduce the machining time but improve the quality of die and mold made of QRO90 material.