• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.8
• /
• pp.461-465
• /
• 2016

n-type silicon shows the better tolerance towards metal impurities with a higher minority carrier lifetime compared to p-type silicon substrate. Due to better lifetime stability as compared to p-type during illumination made the photovoltaic community to switch toward n-type wafers for high efficiency silicon solar cells. We fabricated the front electrode of the n-type solar cell with AgAl paste. The electrodes characteristics of the AgAl paste depend on the contact junction depth that is closely related to the firing temperature. Metal contact depth with p+ emitter, with optimized depth is important as it influence the resistance. In this study, we optimize the firing condition for the effective formation of the metal depth by varying the firing condition. The firing was carried out at temperatures below $670^{\circ}C$ with low contact depth and high contact resistance. It was noted that the contact resistance was reduced with the increase of firing temperature. The contact resistance of $5.99m{\Omega}cm^2$ was shown for the optimum firing temperature of $865^{\circ}C$. Over $900^{\circ}C$, contact junction is bonded to the Si through the emitter, resulting the contact resistance to shunt. we obtained photovoltaic parameter such as fill factor of 76.68%, short-circuit current of $40.2mA/cm^2$, open-circuit voltage of 620 mV and convert efficiency of 19.11%.

• Clinical and Experimental Reproductive Medicine
• /
• v.35 no.3
• /
• pp.223-229
• /
• 2008

Objective: This pilot study was performed to investigate the effect of metformin on insulin resistance, hormone levels, and lipid profiles in non-obese patients with polycystic ovary syndrome. Methods: This study included 16 non-obese patients with polycystic ovary syndrome diagnosed at our hospital from June 2006 to September 2007. Blood samples were collected before and 6 months after metformin treatment for analysis of fasting serum glucose levels, fasting serum insulin levels, a glycemic response to 75 g oral glucose tolerance test (OGTT), and hormonal blood profile including FSH, LH, estradiol, testosterone, free testosterone, serum lipid profiles. Insulin resistance was estimated by calculating fasting glucose/insulin ratio (FGIR), 2 hr glucose/insulin ratio after 75 g glucose load. And we investigated insulin resistance and pancreatic beta cell function by calculating HOMA beta cell function and HOMA IR. Results: After the treatment of metformin, there was significant increase in 2 hr glucose/insulin ratio after 75 g glucose load (p=0.04) and decrease in HOMA IR (p=0.000). But serum lipid profiles did not change significantly. Also the metformin treatment induced a significant reduction in serum free testosterone and LH levels, and LH/FSH ratio (p=0.001, p=0.000, p=0.034). Conclusion: This pilot study showed that metformin might be effective in improving insulin sensitivity, ameliorating hyperandrogenemia in non-obese patients with polycystic ovary syndrome. Further investigations with larger number of patients and long-term observations are necessary to determine the role of metformin.

• Food Science and Preservation
• /
• v.19 no.5
• /
• pp.757-766
• /
• 2012

The SSH100-10 bacterial strain, which exhibits strong antifungal (anti-mold and anti-yeast) activity, was isolated from traditional korean soysauce aged 100 years. The strain was identified as Bacillus velezensis based on Gram-staining, the biochemical properties and 16S rRNA gene sequence determination. B. velezensis SSH100-10 showed strong proteinase activity and NaCl tolerance, but did not produce enterotoxin. Two-antifungal compounds from B. velezensis SSH100-10 were purified using SPE, preparative HPLC, and reverse phase-HPLC. The purified antifungal compounds were identified as $C_{14}$ and $C_{15}$ iturin through MALDI-TOF-MS and amino acid composition analysis. The stability characteristics of the antifungal compounds after temperature, pH, and enzyme treatments suggested that B. velezensis SSH100-10 produced more than two antifungal compounds; pH-stable $C_{14}$ iturin A and $C_{15}$ iturin A, and unidentified pH-unstable compounds. The results suggested that B. velezensis SSH100-10 can be used in soybean fermentation as a starter. Moreover it has potential as a biopreservative in the food and feed industry and as a biocontrol agent in the field of agriculture.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.51-56
• /
• 2009

Time synchronization algorithm in wireless sensor networks is essential to various applications such as object tracking, data encryption, duplicate detection, and precise TDMA scheduling. This paper describes CDRS that is a time synchronization algorithm using the Clock Drift rate and Reference Signals between two sensor nodes. CDRS is composed of two steps. At first step, the time correction is calculated using offset and the clock drift rate between the two nodes based on the LTS method. Two nodes become a synchronized state and the time variance can be compensated by the clock drift rate. At second step, the synchronization node transmits reference signals periodically. This reference signals are used to calculate the time difference between nodes. When this value exceeds the maximum error tolerance, the first step is performed again for resynchronization. The simulation results on the performance analysis show that the time accuracy of the proposed algorithm is improved, and the energy consumption is reduced 2.5 times compared to the time synchronization algorithm with only LTS, because CDRS reduces the number of message about 50% compared to LTS and reference signals do not use the data space for timestamp.

• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.19-33
• /
• 2003

The objective of this study was to evaluate the effects of crumb rubber recycled from used tires as a soil incorporation and topdressing materials on a trafficked Korean lawngrass‘Zenith’(Zoysia japonica). In Exp 1, incorporation treatments included three particle sizes (PS: coarse =4∼6.35 mm, medium =2∼4 mm, and One : less than 2 mm in diameter) and two incorporation rate (IR: 10 and 20%). Wear treatments were applied 30 passes per day by compactor weights being 60 kg with soccer shoes. Topdressing treatments included three PS and two topdressing depth (TD: 5 and 10 mm). Wear treatments were the same as described in Exp 1. In Exp 1, the treatment with medium PS+IR 20 resulted in the tendency to have high total clipping yield. There was no significant difference in clipping yield, turfgrass visual color, coverage, and root length among the treatments. Compared to control, tissue Zn levels increased about 6.5-fold by the treatments. The treatment with fine PS +IR 20 caused a less peak deceleration than coarse PS +IR 10. Total porosity, air-filled porosity, and capillary porosity increased with fine PS +IR 20. In Exp 2, compared to controls, however, there was a difference in turfgrass visual color after the termination of traffic treatment. There was no difference in root length. The treatment with fine PS + TD 10 resulted in the highest total clipping yield. As a result of soil physical analysis, soil penetration resistance was reduced by the treatments. The treatment with coarse PS resulted in a less peak deceleration than fine PS. In conclusion, turfgrass growth was increased by crumb rubber incorporation which enhanced soil physical properties. The crumb rubber topdressing was able to cushion the crown tissue area while still providing a smooth and uniform surface, improve overall turfgrass quality, and reduce compaction.

• Journal of Korea Foresty Energy
• /
• v.22 no.3
• /
• pp.1-10
• /
• 2003

The successional status and potential natural vegetation were examined in the natural deciduous forest in Mt. Chombong area. The examination was based on the subsequent process of generation replacement by understory saplings for the dominant canopy trees within 106 20mx20m square sample plots. The transition matrix model, which was modified from mathematical theory of Markov chain, was employed to analyze the successional status of the study forest. The model suggests that study forest is still seral, and it is considered to be more than 500 years away from the steady state or climax in terms of species composition. The simulations predict a remarkable decrease in the proportion of species composition of the present dominant Quercus mongolica and Kalopanax pictus from current 42.6% and 8.1% to less than 13.3% and 0.5%, respectively, at the steady state. On the contrary, the proportions of Abies holophylla, Acer mono, Fraxinus mandshurica, Tilia amurensis, and Acer pseudo-sieboldianum will increase at the steady state. The change of predicted composition ratio was generally coincide with the result of tolerance index to be compared with the study model. The hypothesis and sensitivity of the model were also discussed to evaluate the applicability to the real situation. The overall results indicated that the present dynamics of the forest must reflect the seral state due to previous disturbance mainly by human related interference.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.37-44
• /
• 2020

This study aimed to explore the relationship between Intelligent Robot Reacher(IRT)-student by examining the factors of their relationship perceived by middle school students. In doing so, we developed questionnaires based on the existing teacher-student relationship scale and conducted an online survey of 283 first graders in middle school. The collected date were analyzed using exploratory factor analyses with SPSS 23 and confirmatory factor analysis with Amos 21. The study findings identified four factors of IRT-student relationship namely "trust", "competence", "emotional exchange", and "tolerance". It is expected that the study can be used to discuss ways to enhance educationally significant interaction between students-IRT and teaching methods using intelligent robots(IRs). Also, the study will contribute to the understanding and development of various services using IRs. Based on the study finidngs, future studies should investigate the perception of various education stockholders (teachers, parets, etc) on IRT to elevate the Human-Robot Interaction in the education field.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.6
• /
• pp.528-538
• /
• 2011

As a forming method for curved hull plates more efficient than the flame bending, mechanical bending using multi point press forming and die-less forming is discussed in this paper. the mechanical forming is a flexible manufacturing system for automatically forming of hull parts. It is especially suited to varied curved parts. This paper discusses a multiple point pressing machine composed of a pair of reconfigurable punches in order to achieve the rapid forming of curved hull plates using division forming and presents how forming information is obtained from the given design surface. Although the mechanical forming can be efficient in the metal forming, spring back after pressing is a phenomenon which must be carefully considered when quantifying the process variables. If the spring back is not accurately controlled, the fabricated shell plate cannot meet assembly tolerance. This paper describes the principles to calculate the proper stroke of each punch at the divided areas. the strokes are determined by an iterative process of sequential pressing and spring back compensation from an unfolded flat shape to its given design surface. FEA(finite element analysis) is used to simulate the spring back of the plate and the IDA(iterative displacement adjustment) method adjusts the offset of pressing punches from the deformation results and the design surface. The shape deviations of two surfaces due to spring back are compensated by integrated system using FEA and IDA method. For the practical application, It is aimed to develop an integrated system that can automatically perform the compensation process and calculate strokes of punches of the double sides' reconfigurable multiple-press machine and some experimental results obtained with mechanical bending are presented.

• Korean Journal of Clinical Pharmacy
• /
• v.12 no.1
• /
• pp.22-28
• /
• 2002

Aceclofenac, 2-[(2',6'-dichlorphenyl)amino]phenylacetoxiacetic acid, is a new nonsteroidal anti-inflammatory drug that belongs to the family of phenylacetic acids. It shows good tolerance and potent analgesic/antiinflammatory properties, and acts on cartilaginous chondriocytes, stimulating their repair mechanism. The purpose of the present study was to evaluate the bioequivalence of two aceclofenac products, $Airtal^{TM}$ tablet (Daewoong Pharmaceutical Co.) and $Acer^{TM}$ capsule (Kyungdong Pharmaceutical Co.), according to the guideliner of Korea Food and Drug Administration (KFDA). The aceclofenac release from the two aceclofenac products in vitro was tested using KP VII Apparatus II method at pH 7.8 dissolution media. Sixteen normal male volunteers, $23.13\pm2.03$ years in age and $66.33\pm7.08$ kg in body weight, were divided into two groups and a randomized $2\times2$ cross-over study was employed. After one tablet or capsule containing 100 mg of aceclofenac was orally administered, blood was taken at predetermined time intervals and the concentrations of aceclofenac in serum were determined using HPLC with UV detector. The dissolution profiles of the two aceclofenac products were very similar at pH 7.8 dissolution media. The pharmacokinetic parameters such as $AUC_t,\;C_{max}\;and\;T_max$ were calculated and ANOVA test was utilized for the statistical analysis of the parameters. The results showed that the differences in $AUC_t,\;C_{max}\;and\;T_{max}$ between two products were $6.50\%,\;-1.06\%\;and\;11.96\%$ respectively, when calculated against the $Airtal^{TM}$ tablet. The powers $(1-\beta)\;for\;AUC_t,\;C_{max}\;were\;89.82\%\;and\;82.84\%$, respectively. Minimum detectable differences $(\Delta)\;at\;\alpha=0.05\;and\;1-\beta=0.8$ were less than $20\%\;(e.g.,\;17.51\%\;and\;19.30\%\;for\;AUC_t,\;C_{max}$, ). The $90\%$ confidence intervals were within $\pm20\%\;(e.g.,\;-3.73\%\sim16.73\%\;and\;-12.34\%\sim10.22\%\;for\;AUC_t,\;C_{max},\;respectively)$. Two parameters met the criteria of KFDA for bioequivalence, indicating that $Acer^{TM}$ capsule is bioequivalent to $Airtal^{TM}$ tablet.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.328-333
• /
• 2012

Current differential GPS (DGPS) system consists of reference station (RS), integrity monitor (IM), and control station (CS). The RS computes the pseudorange corrections (PRC) and generates the RTCM messages for broadcasting. The IM receives the corrections from the RS broadcasting and verifies that the information is within tolerance. The CS performs realtime system status monitoring and control of the functional and performance parameters. The primary function of a DGPS integrity monitor is to verify the correction information and transmit feedback messages to the reference station. However, the current algorithms for integrity monitoring have the limitations of integrity monitor functions for satellite outage or anomalies. Therefore, this paper focuses on the detection and identification methods of satellite anomalies for maritime DGPS RSIM. Based on the function analysis of current DGPS RSIM, it first addresses the limitation of integrity monitoring functions for DGPS RSIM, and then proposes the detection and identification method of satellite anomalies. In addition, it simulates an actual GPS clock anomaly case using a GPS simulator to analyze the limitations of the integrity monitoring function. It presents the brief test results using the proposed methods for detection and identification of satellite anomalies.