• Preventive Nutrition and Food Science
• /
• v.16 no.1
• /
• pp.37-44
• /
• 2011

The potential probiotic of a total of 15 Bacillus species isolated from Korean soybean paste (doenjang) was evaluated. Among those tested, the CSY191 and CSY388 strains were selected as probiotic bacteria due to their acid and bile tolerance, respectively. These strains were classified as Bacillus subtilis based on morphological, physiological, and chemotaxonomic features as well as on phylogenetic analysis based on their 16S rDNA sequences. These strains CSY191 and CSY388 showed a significant survival with rate range of 30.0 to 58.3% and of 31.0% to 58.1%, respectively, under artificial gastric acidic conditions at pH 3.0. These CSY191 and CSY388 strains appeared to have high antimicrobial activity against Salmonella Typhimurium, Bacillus cereus and Listeria monocytogenes. Also, methanol extractions (surfactin-like compounds) of strain CSY191 and strain CSY388 activated RAW264.7 microphages and induced the production of nitric oxide (NO) in a concentration-dependent manner, respectively. Therefore, strain CSY191 and strain CSY388 can be used as potential probiotics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.9
• /
• pp.1736-1745
• /
• 2002

The objective of this study is to predict the roll wear in hot rod rolling process. In this study hot rod rolling process for round and oval passes has been investigated. In order to predict the roll wear, the wear model is reformulated as an incremental form and then wear depth of roll is calculated at each deformation step on contact area using the results of finite element analysis, such as relative sliding velocity and normal pressure at contact area. Archard's wear model was applied to predict the roll wear. To know the thermal softening of DCI (Ductile Cast Iron) roll according to operating conditions, high temperature micro hardness test is executed and a new wear model has been proposed by considering the thermal softening of DCI roll expressed in terms of the main tempering parameter curve. 3D wear program developed in this study might be used for adjusting the gap of rolls to set up a suitable rolling schedule for keeping dimensional tolerance of the product.

• Journal of Plant Biotechnology
• /
• v.36 no.2
• /
• pp.149-156
• /
• 2009

Application of exogenous polyamines (PAs) reduced the paraquat (PQ)-induced cotyledon injuries in radish seedling plants with 1 mM spermidine (Spd) being the most effective protectant. PQ injury symptoms in the cotyledons, e.g., large accumulation of $H_2O_2$, and losses of fresh weight, chlorophyll, and proteins, were significantly alleviated. Likewise, analysis of $H_2O_2$-scavenging enzymes such as catalase (CAT) and guaiacol peroxidase (GPX) showed that pretreatment with Spd among PAs remarkably increased total CAT activity and strongly retarded PQ-induced rapid decline in total GPX activity. In a native gel assay, one CAT isozyme (CAT1) and two GPX isozymes (GPX1 and a newly synthesized GPX isozyme) proved to be more responsible for PQ tolerance, as manifested by the strong increases in their activities by Spd pretreatment. Based on these results, we can suggest that PAs (especially 1 mM Spd) may function as antioxidant protectors by invoking CAT and GPX enzymes which control the endogenous $H_2O_2$ level in radish cotyledons exposed to PQ.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.3
• /
• pp.328-336
• /
• 2017

The exit surface of a lens is designed using a three-dimensional free-form expression in order to easily modify a curved surface. This enables the design of numerical values and mathematical things using three-dimensional free-form expression, and enhances precision because it can be fine-tuned via numerical control. The standard of "Classification of Luminaire Light Distribution" for outdoor lighting fixtures by IESNA is adopted in order to examine the correlation between three-dimensional free-form surface expression and lighting performance. The variation of light distribution type and range is analyzed using the values of maximum light intensity and 50% light intensity. The actual tolerance occurs owing to parameters such as the thickness of the lens, the distance between LEDs, and the movement of the center of the incident surface; the effects of changes in these parameters on the performance are compared and analyzed.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.76-81
• /
• 1999

216 microorganisms which able to degrade wasted lubricant were isolated in the region of contaminated with wated lubricant such automobile repair shops, garages and gas stations in Taejon. Most activated strain among them is selected and used in this research. The microorganism in identified as Acinetobacter lwoffii 16C-1, which shows active growth and hydrocargon utilization withnormal alkane such as tetradecane, hexadecane and octadecane, and do not grow aromatic hydrocargons, cycloalkane, and branched alkane. In addition, A. lwoffii 16C-1 has resistance to heavy metals such as Ba, Li, Cr, and Mn more than 6.4mg/ml, and showed negligible tolerance against antibiotics. Effects of environmental conditions including concentration of wasted lubricnt, pH, NaCl concentration, nitrogen source and phosphate on microorganism growth and emulsification were studied. 2% of wasted lubricant, pH 7.0, 0-1% of NaCl, 0.2% of peptone, and 0.01% of K2HPO4 is turn out to be optimum condition. By the analysis of remaining oils, almost of hydrocarbons added to the media are removed by A. lwoffii 16C-1 at 30$^{\circ}C$ after 2 days of culture, which showed excellent oil degradation characteristics.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.3
• /
• pp.35-45
• /
• 2011

Due to people's internet use growth and proliferation of ubiquitous technology, the internet addiction is becoming a social issue. However, the current adults' self-diagnosis measure about internet addiction, the K-scale, is a normal diagnostic method, which it does not consider user characteristics. In this research, we will propose a new internet addiction diagnostic method based on users' non-duty internet activities by using some questionnaire items to collect users' basic internet patterns used on duty related or non-duty related web sites. Since we simply ask for the basic internet usage pattern to each user who does not like to check frankly questionnaire items in the K-scale, the proposed method can find some hidden internet addicts compared to the K-scale with the SPSS statistical analysis tool.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.206-214
• /
• 2018

This paper proposes an impact point estimation algorithm of the rifle using microphone sensors. The proposed algorithm resolves the time synchronization problem by expanding the existing ToA (Time of Arrival) method to TDoA (Time Difference of Arrival) method and verifies the performance of the algorithm through the actual shooting experiments. By comparing analysis of the actual and the estimated impact points by the algorithm, it is confirmed that the proposed algorithm has excellent performance by estimating the impact point accurately within the tolerance range.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.2
• /
• pp.144-154
• /
• 2000

We propose an algorithm for obtaining a triangular approximation of a trimmed NLRBS surface. Triangular approximation is used in the pre-processing step of many applications such as RP(Rapid Prototyping), NC(Numerical Control) and FEA(Finite Element Analysis), etc. The algorithm minimizes the number of triangular elements within tolerance and generates a valid triangular mesh for STL file and NC tool path generation. In the algorithm, a subdivision method is used. Since a patch is a basic element of triangular mesh creation, boundary curves of a patch are divided into line segments and the division of curves is applied for the interior of the surface. That is, boundary curves are subdivided into line segments and two end points of each line segment are propagated to the interior of the surface. For the case of a trimmed surface, triangulation is carried out using a model space information. The algorithm is superior because the number of elements can be controlled as the curvature of the surface varies and it generates the triangular mesh in a trimmed region efficiently. To verify the efficiency, the algorithm was implemented and tested for several 3D objects bounded by NURBS surfaces.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.441-445
• /
• 2020

A Permanent Magnet Synchronous Motor (PMSM) for an electrical power steering system (EPS) is adopting various dual three-phase type stator windings to get the high fault tolerance capability when the motor runs at the failure condition. In this paper, we analyze the effects of stator winding arrangements on the characteristics such as torque and efficiency of the PMSM with leading and lagging current angle variations using finite element method. As a result, the most valuable design criteria are proposed to select stator winding method. Especially, we suggest the most appropriate winding method in terms of torque and efficiency, extending constant output area and decreasing noise and torque ripples.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.98-106
• /
• 1998

Efficient power transmission from a single mode fiber to a thin-film waveguide devices is one of the most fundamental and inevitable subject that should be first solved toward the realization of the integrated optic system. In this paper, fiber-waveguide coupling structure is considered and the large mismatch of field profiles at the fiber-waveguide interface is well avoided by using to the coupling guide which is intentionally developed on the top of the thin-film guuide. From the simulation, the taper-type structure are shown to be easier realizeable than the uniform one, since optical coupling between the guides in the latter has a stronger tolerance to the deviation of waveguide parameters.