• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.68.2-68.2
• /
• 2020

UVO-Multiband Polarizing Imager System (UVOMPIS) is an ultraviolet to visible light multi-wavelength polarization/imaging system for Compact Advanced Satellite. We developed Linear Astigmatism Free-Three Mirror System (LAF-TMS) D200F2 as an optical system of UVOMPIS which has an entrance pupil diameter of 200 mm, a focal ratio of 2, a field of view of 2° × 4°. LAF-TMS is a confocal off-axis reflecting telescope system that removes linear astigmatism, and its all mirrors (M1, M2, M3) are optimized with the freeform surface to reduce high-order aberrations. Through the sensitivity analysis and Monte-Carlo simulation as the tolerance analysis, we can confirm the feasibility of the system, relatively sensitive parameters (tilt, decenter, despace, surface RMS error), and considerations for optomechanical design. From the sensitivity analysis, we can discover the relatively sensitive optical alignment parameters to a single perturbation. Further more, in the monte-carlo simulation, we investigate the minimum tolerance budget satisfying the required optical performance and whether the tolerance range is satisfied within manufacturing error.

• Journal of Korean Academy of Nursing
• /
• v.33 no.6
• /
• pp.743-752
• /
• 2003

Purpose: This study was conducted to combine the effects of pulmonary rehabilitation program (PRP) on exercise capacity/tolerance and general health status of COPD patients based on the primary research results examined the effects of PRP, Method: Seventeen studies were selected by the sampling criteria established to include the studies that reported enough statistics necessary to conduct meta-analysis. Result: According to the study results, the most effective indicators for exercise capacity/tolerance were exercise time (such as cycling time or treadmill walking time) and ground walking distance within given time (6 minutes or 12 minutes), whereas effects on such indicators as VE and VO$_2$ were not statistically significant. PRP induced significant effect on patients' general health status, frequently measured by physical, psycho-emotional, and holistic indicators, the enhancement on psycho-emotional dimension resulted from PRP was more prominent than those of the other dimensions. From the results, it was noted that the place where PRP was given and the contents of PRP exercised their influence on the outcome variables. Which body part was trained was also one of the important factors that influence on the patients' perception of dyspnea during exercise as well as on exercise capacity/tolerance. Conclusion: PRP including exercise training significantly improved the exercise capacity and general health status of COPD patients.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.228-235
• /
• 2012

It is very important to analyze effectively the tolerance of an optical system with high resolution as the projection lens of photolithography or as the objective lens of a microscope. We would like to find an effective assembly structure and compensators to correct aberrations through global wavefront sensitivity analysis using Zernike polynomial expansion from the field and pupil coordinates rather than from only pupil coordinates. In this paper, we introduce global wavefront coefficients by small perturbations of the optical system, and analyze the optical performance with these coefficients. From this analysis, it is possible to see how we can enlarge the tolerance through the proper assembly structure and compensators.

• Korean Journal of Child Studies
• /
• v.37 no.2
• /
• pp.13-25
• /
• 2016

Objective: The purposes of this study were to examine the effects of school-age children's ego strength, failure tolerance, and performance anxiety on their school class adjustment, and to model the relation structure of the variables. Method: For these purposes, a questionnaire survey was conducted with 562 6th graders. Results and Conclusion: The results of this study are summarized as follows. First, ego strength, failure tolerance, and performance anxiety were significantly different according to gender. Second, in male students, ego strength, failure tolerance, and performance anxiety had a significant direct effect on school class adjustment. In addition, ego strength and failure tolerance had a significant indirect effect on school class adjustment. Third, female students' paths to school class adjustment were similar to male students' but the effect of failure tolerance on performance anxiety and the effect of performance anxiety on school class adjustment were not significant. Fourth, in the results of multi-group analysis, the effect path from ego strength to school class adjustment was different between male and female students, and the effect was higher in female students than in male students.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.221-229
• /
• 2002

In thin paper, error tolerance of each array element which satisfies error tolerance of beam pattern is decided by using the Monte-Carlo method. Conventional deterministic method decides the error tolerance of each element from the acceptance pattern by testing all cases, but this method is not suitable for the analysis of large number of array elements because the computation resources increase exponentially as the number of array elements increases. To alleviate this problem, we applied new algorithm which reduces the increment of calculation time increased by the number of the array elements. We have validates the determined error tolerance region through several simulation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.5
• /
• pp.57-63
• /
• 2010

Tolerance analysis is one of the most important processes to improve the image quality of products. High resolution camera module for mobile phones needs precision assembly technology since the module becomes smaller and thinner. This paper will focus on the unit tolerance and the assembly tolerance which can affect the performance of the module. Lens shading and relative illumination were used to evaluate the optical axis scatter for each component on camera and estimate the assembly yield rate based on the evaluation result. A program was developed to analyze the impact on optical axis by each module, then to optimize the dimensions and tolerance for reducing the scatter of optical axis assembly. Through the simulation, though a rate of relative illumination was declined in where optical axis is displaced $100{\mu}m$ from sensor center, MTF performance is not influenced by increasing in optical axis displacement. It was seen that assembly yield was improved in result of simulation after correcting optical axis tolerance.

• Molecules and Cells
• /
• v.21 no.2
• /
• pp.192-196
• /
• 2006

Salt tolerance was evaluated at the young seedling stage of rice (Oryza sativa L.) using recombinant inbred lines (MG RILs) from a cross between Milyang 23 (japonica/indica) and Gihobyeo (japonica). 22 of 164 MG RILs were classified as tolerant with visual scores of 3.5-5.0 in 0.7% NaCl. Interval mapping of QTLs related to salt tolerance was conducted on the basis of the visual scores at the young seedling stage. Two QTLs, qST1 and qST3, conferring salt tolerance, were detected on chromosome 1 and 3, respectively, and the total phenotypic variance explained by the two QTLs was 36.9% in the MG RIL population. qST1 was the major QTL explaining 27.8% of the total phenotypic variation. qST1 was flanked by Est12~RZ569A, and qST3 was flanked by RG179~RZ596. The detection of new QTLs associated with salt tolerance will provide important information for the functional analysis of rice salt tolerance.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.147-147
• /
• 2017

Rice is one of the major staple food in Asia, covering around half of the world population. More than 40% of rice cultivation area are subject to abiotic stresses such as drought, submergence and phosphate deficiency. Pyramiding useful genes into elite variety is a promising strategy to develop tolerance varieties to multiple abiotic stresses. However, some genes are not functionally compatible when they are introgressed into the same elite variety. Here, we tested the functional compatibility of Sub1 and Pup1, major QTLs for tolerance to submergence and phosphate (P)-deficiency conditions, respectively. Phenotypic analysis revealed that IR64-Sub1 Pup1(SP1) plants harboring both Sub1 and Pup1 QTLs showed significant tolerance to submerged conditions, similarly in IR64-Sub1 (Sub1) plant, while SP1 plants failed to tolerate to P-deficiency conditions; only IR64-Pup1 (Pup1) showed strong P-deficiency tolerance phenotype. In submerged conditions, the expression levels of Sub1A and PSTOL1, major genes for Sub1 and Pup1 QTLs, respectively, were not significantly different in between Pup1 and SP1 plants. On the other hand, the expression of both Sup1A and PSTOL1 was significantly downregulated in P-deficiency conditions, suggesting that Sub1 and Pup1 repressed gene expression each other in P-deficiency conditions. These results suggest Pup1 does not compromise the Sub1 function in submerged conditions while Sub1 suppresses the function of Pup1 in (P)-deficient condition, possibly by regulating transcript level of Pup1. In conclusion, Sub1 and Pup1 are functionally compatible in terms of submergence tolerance but not in P-deficiency conditions. Further analysis need to be performed to elucidate how Sup1 suppresses the function of Pup1 in P-deficiency conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.905-913
• /
• 2003

Generally, most of optimization have been performed with fixed sizes and variables. But, the optimum value considering tolerance of design variables and material properties, might be useless owing to exist in infeasible region. It is needed that the tolerance of design variables and material properties is considered for a real design problem. A deterministic optimal solution can be in the feasible region by performing robust optimization considering tolerance. In the paper, robust design is suggested to gain an optimum insensitive to variation of design variables and it is applied for optimization problem of caliper disc brakes for vehicles.