• 대한금속재료학회지
• /
• 제50권2호
• /
• pp.100-106
• /
• 2012

This study was performed to fabricate porous titanium foam by three-dimensional layer manufacturing process, and to evaluate the porosities, compressive stress, Young's modulus and fracture pattern. Porous titanium foam was made of CP(Commercial Pure) titanium powder (${\leq}5{\mu}m$). Total porosities of titanium foam were in the range of 55-68%. Pore size distribution was $200-440{\mu}m$ for coarse pores, $50-100{\mu}m$ for intermediate pores and $5-10{\mu}m$ for fine pores. Compression elastic modulus and compression stress were decreased with increasing porosity. Young's modulus ranged from 1.04-5.62 GPa and maximum stress ranged from 20-241 MPa. Regarding the mechanical properties, 3D(Three Demensional) porous titanium fabricated layer manufacturing is a promising material for human bone replacement.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.120-127
• /
• 2022

질소산화물(NOx)은 대기오염의 주요 인자로 일산화질소와 이산화질소의 형태로 존재하며 인체에 유해하다. 최근 대기 중 NOx를 제거하기 위한 많은 연구가 진행되고 있으며, 이러한 노력은 건설재료 분야에서도 동일하다. NOx는 광촉매 반응을 이용하여 효율적으로 제거할 수 있는 것으로 알려져 있다. 본 연구에서는 활성탄(AC)과 이산화타이타늄(TiO₂)을 이용한 폼 복합재의 NOx 제거성능을 조사하였다. AC는 폼 복합체의 비표면적을 증가시켜 TiO₂의 광촉매 반응 효율을 향상시켰다. 본 연구에서는 AC의 혼합율을 주요 변수로 하여 폼 복합체를 제조하였다. 제조된 시험체를 이용하여 ISO-22197-1에 제시된 시험방법에 따라 NOx 제거성능을 평가하였다. 폼 복합체의 비표면적은 AC 함량에 따라 증가하는 경향을 나타내었으나 15% 이상에서는 감소하였다. 또한 AC 혼입률이 15%일 때 NOx 제거 효율이 가장 높았다.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.488-495
• /
• 2011

This study was performed to fabricate the porous titanium foam by space holder method using NaCl powder, and to evaluate the effect of NaCl volume fractions (33.3~66.6 vol.%) on the porosities, compressive strength, Young's modulus and permeability. For controlling pore size, CP titanium and NaCl particles were sieved to different size range of 70~150 ${\mu}m$ and 300~425 ${\mu}m$ respectively. NaCl of green Ti compact was removed in water followed by sintered at $1200^{\circ}C$ for 2 hours. Total porosities of titanium foam were in the range of 38-70%. Pore shape was a regular hexahedron similar that of NaCl shape. Porous Ti body showed that Young's modulus and compressive strength were in the range of 0.6-6 GPa and 8-127 MPa respectively. It showed that pore size and mechanical properties of Ti foams was controllable by NaCl size and volume fractions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.209-212
• /
• 2001

Aircraft industry is developed very fast so titanium scrap was generated to manufacture. Titanium scrap was wasted and used to deoxidize cast iron so we are study recycling of it. In this research were studied that metal hydride of reacted in hydrogen chamber of AMS4900, 4901, return scrap titanium alloy and sponge titanium granule. The temperature of hydrogenation was 40$0^{\circ}C$ in the case of pure sponge titanium but return scrap titanium alloy were step reaction temperature at 40$0^{\circ}C$ and 50$0^{\circ}C$, and after the hydride of titanium alloy were crushed by ball mill for 5h. Titanium hydride contains to 4wt.% of hydrogen theoretically as theory. It was determined by heating and cooling curve in reaction chamber. The result of XRD was titanium hydride peak only that it was similar to pure titanium. Titanium hydride Powder particle size was about 45${\mu}{\textrm}{m}$, and recovery ratio was 95w% compared with scrap weight for a aluminum foam agent.

• 한국세라믹학회지
• /
• 제49권5호
• /
• pp.427-431
• /
• 2012

The $TiO_2$ foam synthesized using freeze-casting is a promising photocatalyst and photovoltaic electrode for a variety of energy applications, because the freeze-casting technique is easy to use, cheap, and suitable for mass-production. Despite its several advantages, little scientific information is available on the processing and morphology of the $TiO_2$ foams processed by freeze-casting. In particular, no systematic study has been performed on the microstructural evolution and morphological change of the rutile-phase $TiO_2$ foams during sintering. Therefore, in the present study, several $TiO_2$ foam samples were produced using the freeze-casting technique, which were then sintered at a relatively high temperature of $1200^{\circ}C$ for 1, 2, and 4 h to compare the morphological changes in the microstructure and to understand the effects of processing parameters of the rutile-phase $TiO_2$ foams. The foam ligament size increased near linearly with increasing sintering time whereas the average pore size decreased only slightly with increasing sintering time, with changes in particle morphology from sphere to rod and complete phase transformation from anatase to rutile.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.289-292
• /
• 2001

Aluminium foams, having a closed cell structure, fabricated by applying the powder compact method and an induction heating were studied. The powdered A6061 mixed with the powdered titanium hydride as a foaming agent was hot pressed into a foamable precursor. The resulting precursor was foamed by induction heating up to desired temperature. The effects of the titanium hydride content ($0.3{\~}1.5 wt.\%$), pressing pressure of the foamable precursor material (50-150kN), the forming temperature ($610{\~}690^{\circ}C$) and heating rate during foaming on the expansion behavior of the foam were investigated.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.309-310
• /
• 2006

Porous titanium implants can be produced by powder metallurgy in combination with suitable space holder materials. Various mechanical experiments were done to characterize this material regarding the influence of the processing parameters on microstructure and mechanical properties taking into account the properties of the human bone. In this paper, the anistropic behaviour of uniaxially compacted samples was analysed in compression tests and compared to the behaviour of isostatically pressed samples. The failure of the struts of the porous titanium and the crack- initiation and -growth was examined by in-situ SEM analysis.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.308-308
• /
• 2006

• 한국주조공학회지
• /
• 제31권3호
• /
• pp.145-151
• /
• 2011

Metallic foam has been known as a functional material which can be used for absorption properties of energy and sound. The unique characteristics of Al foam of mechanical, acoustic, thermal properties depend on density, cell size distribution and cell size, and these characteristics expected to apply industry field. Al-Zn-Mg-Cu alloy foams was fabricated by following process; firstly melting the Al alloy, thickening process of addition of Ca granule to increased of viscosity, foaming process of addition of titanium hydride powder to make the pores, holding in the furnace to form of cooling down to the room temperature. Metal foams with various porosity level were manufactured by change the foaming temperature. Compressive strength of the Al alloy foams was 2 times higher at 88% porosity and 1.2 times higher at 92% porosity than pure Al foams. It's sound and vibration absorption coefficient were higher than pure Al foams and with increasing porosity.

• Elastomers and Composites
• /
• 제49권4호
• /
• pp.341-345
• /
• 2014

본 연구에서는 이산화티타늄에 산소의 2p궤도보다 높은 에너지를 갖고 있는 2종 이상의 전이금속을 도핑시켜 빛의 유무와 관계없이 광촉매 작용을 하도록 한 자기구동형 광촉매를 PU발포체에 코팅하였다. 그리고 자기구동형 광촉매가 코팅된 PU발포체에 대하여 항균성 및 항곰팡이 특성을 알아보았다. 항균성은 자기구동형 광촉매가 코팅된 PU발포체에서 균수가 99.9%이상 저감되는 것으로 나타났으며, 항곰팡이성도 96%이상의 곰팡이포자수가 감소함을 보여 항균성 및 항곰팡이성이 우수한 것으로 확인되었다. 또한 내구성은 자기구동형 광촉매가 코팅된 PU발포체에 대하여 Weather-O-meter로 test하고 test전과 후의 포름알데히드 분해율을 확인한 결과 96.5%에서 89.8%로 약 7%p로 미약하게 감소하였으며 전자현미경으로도 관찰한 표면상태도 그대로 고르게 부착되어 있음을 확인할 수 있어 표면부착강도가 우수한 것으로 확인되었다.