• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.203-212
• /
• 2013

The tooth morphology and qualitative mineral contents on enamel surface using energy dispersive X-ray spectroscopy, (EDX) were examined in the white-toothed shrew (genus Crocidura ) Crocidura lasiura and C. suaveolens and the red-toothed shrew (genus Sorex) Sorex caecutiens. In the case of C. lasiura and C. suaveolens, dental formula was found I 3/1 C1/1 P1/1 M3/3=28. The upper 1st and 2nd molars had an unequal W-shape formed by 5 cusps on the crown. The 3rd molar was found one-third the size of those of 1st and 2nd molars. The upper 1st incisor had two different sized hook-shapes and the lower 1st incisor was even. In the case of S. caecutiens, dental formula was found to be I3/1 C1/1 P3/1 M3/3=32. The upper 1st and 2nd molars had an equal W-shape on crown. The upper 3rd molar was half the size of those of the other molars. The upper 1st incisor possessed two similar sized hook-shapes and the lower 1st incisor had an uneven and serrated form. A comparison with the dental and cranial measurements revealed C. lasiura to be the largest of the three species (p<0.001) and C. suaveolens and S. caecutiens were similar in size (p>0.05). A qualitative analysis of mineral contents on enamel surface of the lower 1st incisor and lower 1st molar using EDX revealed C, O, P, Ca and Cu in all specimens and Pb was detected in several enamel specimens. No significant differences in the mineral contents (% weight) were observed among the three species (p>0.05). Fe was only detected on enamel surface of S. caecutiens with red pigmented teeth. Therefore, Fe is responsible for the red tip of the teeth. These results suggest that tooth morphological characteristics including the color of the tooth tip might be used as the key classifying species belonging to Crocidura and Sorex.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.3
• /
• pp.179-188
• /
• 1981

The authors made an investigation concerning the geographical distribution and some major differentiations in morphological characteristics associated with the each habitat, of the pond smelt, Hypomesus olidus, which was introduced into Korea more than 50 years ago. Major characteristics utilized for the comparison study were upper jaw (maxillary), number of fin rays, scale structure, vertebral count, number of pyloric caeca, number of gill rakers, and the relative measurements of these and other internal characters. 1. The main areas of natural distribution are Paro Lake, Soyang Lake, Han River, Euirim Lake, and Ogjeong Lake (or Unam Lake) and the tributaries of these waters. 2. Morphological variations varied when the mean values of measurements from each area were compared with the standard measurement value by mosaic comparison, and in some instances a significant variation was found. 3. The most significant variations were found in the number of fin rays of pectoral and anal fins; the lengths from the tip of snout to the origin of pectoral fin, from snout to ventral fin, and from snout to anal fin, relative to standard body length; eye depth relative to head length; upper jaw: the number of pyloric caeca and the scale structure. Variations, on the other hand, by each habitat were not clear in the numbers of ventral and dorsal fin rays, gill rakers, vertebrae and lateral line scale : and the depth of caudal peduncle and distance from the tip of snout to the origin of dorsal fin relative to standard body length. 4. The scales of pond smelt showed some differences in the shape of scales, the shape and position of the focus and the number of ridges according to the scale positions on the body. No radii were present. The relations between longitudinal and transverse diameters of the scale suggest that the pond smelts of Soyang Lake and Un-am Lake are closely related, and those of Han River and Euirim Lake are also closely related. 5. The geographical variations in morphology of the pond smelt seem to have resulted from the variations in turbidity, water temperature, salinity (rather conductivity) and currents. 6. From the results obtained, it may be concluded that such factors as supramaxillary, relation between scale length and its breadth, number of caudal vertebrae and eye depth relative to head length may be used as the key characters for the classification of geographical varieties of Pond smelt.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.1
• /
• pp.34-41
• /
• 2014

Purpose: In this study, the diameter of each implant driver was measured and compared to find out the compatibility of implant drivers. Materials and methods: Drivers from 12 implant systems being used in Dankook University Dental Hospital were included in this study. The shapes of the implant drivers were segregated, and the effective length and the diameter of upper, middle, lower part of driver tips were measured (n=10). The measured data were mathematically analyzed for its compatibility. Results: A driver with the smallest diameter (1.17 mm) had the highest compatibility at the upper part of driver tip. This driver could be used for a bigger driver up to 1.35 mm in diameter. There were several driver groups which had the same diameter so as to be interchangeable each other. In the middle part, the smallest diameter measured was 1.2 mm and this was able to replace a driver up to 1.40 mm diameter. Since the diameter generally became thicker from upper part (the tip of driver) to the lower part (the shank of driver), some drivers with bigger diameter at the upper part so which was failed to show any compatibility became compatible with a driver which had smaller diameter at the upper part but wider in the middle part. The compatibility of torx shape drivers were affected by the inner diameter of the drivers not only by the outer diameter. Furthermore, the inner diameter of torx drivers decided the compatibility between torx and hex drivers. Conclusion: From the study it was found that compatibility in drivers existed among certain implant systems and to check its compatibility the diameter at a certain effective length should be measured. However, there has been not enough studies about long-term use of compatible drivers, so effects of using compatible drivers on drivers and implants are unknown. Therefore, usage in inevitable cases only is recommended and further study is needed.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.16-27
• /
• 2000

In order to produce raw material powder of advanced magnetic material by spray roasting process, newly modified spray roasting system was developed in this work. In this spray roasting system, raw material solution was effectively atomized and sprayed into the reaction furnace. Also, uniform temperature distribution inside reaction furnace made thermal decomposition process fully completed, and produced powder was effectively collected in cyclone and bag filter. This system equipped with apparatus which can purify hazard produced gas. In this study complex acid solution was prepared by dissolution of mill scale and ferro-Mn into the acid solution, and the pH of this complex acid solution was controlled about to 4. It was conformed that mill scale and ferro-Mn containing a lot of impurities such as $SiO_2$, P and Al could be used as raw material by reducing the impurities content of complex acid solution below 20 ppm. Complex oxide powder of Fe-Mn system was produced by spraying purified complex acid solution into the spray roaster through nozzle, and the variations of produced powder characters were studied by changing he reaction conditions such as reaction temperature, the injection velocity of solution and air, nozzle tip size and concentration of solution. The morphology of produced powder had spherical shape under the most experimental conditions, and concentration of solution. The morphology of produced powder has spherical shape under the most experimental conditions, and the composition and the particle size distribution were almost uniform, which tells the excellence of this spray roasting system. The grain size of most produced powder was below 100 nm. From the above results, it will be possible to produce ultra fine oxide powder from the chloride of Fe, Mn, Ni, Cu and rare earth by using this spray roasting system, and also to produce ultra fine pure metal powder by changing reaction atmosphere.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.76-83
• /
• 1984

This experiment was performed to investigate the flowering habit of sesame (Sesamum indicum L.). Sesame varieties tested could be classified into 8 different plant types by their morphological traits such as capsule shape, capsule setting habit and branching types among sesame gene pool of Crop Experiment Station, ORD. The first flower was appeared at the lowest node on main stem. Flowers were appeared progressively toward the tip of the main stem and also toward the tips of branches. The interval of flowering for a node was about one day, but 3 to 8 days for the flowers on the tips. Side flowers started at 4 to 5 nodes lower than those of center flower at the same day. Flowers were beared 2 by 1 node on the middle part of flower setting node (7-9) in mono capsule setting habit in spite of its normal is 1 by 1 node on the other nodes. Flowers were beared opposite direction on each node of stem and flowering toward the tip of main stem composed of cross shape between nodes and spiral, reverse of clockwise direction. We called this habit as cross spiral flowering order and cross spiral phyllotaxis. The first flower on branches was appeared when center flower on the 5th node of main stem began to flower. The branches produced at higher nodes on main stem showed larger flowering periods and more number of flowers than that at lower parts. BTB (Branch, Tricapsule, Bicarpels, 4 Loculi) type showed three capsule setting habits and same flowering period both on main stem and branches while BTQ (Branch, Tricapsule, Quadricarpels, 8 Loculi) type showed three capsule setting habit on main stem and mono-capsule setting habit on branches. In BTQ type, the period of flowering was much shorter on branches than on main stem. Branching type was considered more promising than non branching type for the breeding of early maturing high yielding variety because branching type has the advantage of bearing a lot of flowers in comparatively short flowering period.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.503-514
• /
• 2011

In this research, the seismic connection details for two concrete-filled U-shape steel beam-to-H columns were proposed and cyclically tested under a full-scale cruciform configuration. The key connecting components included the U-shape steel section (450 and 550 mm deep for specimens A and B, respectively), a concrete floor slab with a ribbed deck (165 mm deep for both specimens), welded couplers and rebars for negative moment transfer, and shear studs for full composite action and strengthening plates. Considering the unique constructional nature of the proposed connection, the critical limit states, such as the weld fracture, anchorage failure of the welded coupler, local buckling, concrete crushing, and rebar buckling, were carefully addressed in the specimen design. The test results showed that the connection details and design methods proposed in this study can well control the critical limit states mentioned above. Especially, the proposed connection according to the strengthening strategy successfully pushed the plastic hinge to the tip of the strengthened zone, as intended in the design, and was very effective in protecting the more vulnerable beam-to-column welded joint. The maximum story drift capacities of 6.0 and 6.8% radians were achieved in specimens A and B, respectively, thus far exceeding the minimumlimit of 4% radians required of special moment frames. Low-cycle fatigue fracture across the beam bottom flange at a 6% drift level was the final failure mode of specimen A. Specimen B failed through the fracture of the top splice plate of the bolted splice at a very high drift ratio of 8.0% radian.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.1
• /
• pp.18-39
• /
• 2016

The study pertains to reviewing and discussing of the master plan of the main buildings in the palaces of Joseon Dynasty regarding on a Feng Shui concept that has been implemented on the palace axis that is originated from the main mountain. Gyeongbokgung (景福宮) Palace is located on the northwest coner of Hanyang (漢陽) and on the tip of the main mountain which is in contrast a quite distinguishable from the location of the Fobidden city in Beijing located in the middle of a vast basin. Changdeokgung (昌德宮) Palace as well is also located on the tip of Eungbong (鷹峯), a part of Samkaksan (三角山) mountain, of which the locations were designed for the palaces to receive the benevolent force from the main mountain. The same concept was also applied to appointing the ideal location of the maJor buildings such as Jungjeon (正殿: The throne hall), Pyunjeon (便殿: The king's office) and Chimjeon (寢殿: The king and queen's residence) in the palace that must receive the benevolent force from the qui stream also originated from the main mountain, as such that the buildings have in close relationship with the king. Amisa (蛾眉砂) had been considered as an important geographical milestone of the estate where the palace is located, especially as the guiding landmark for other buildings that must be on the land axis. The land axis with the Amisa as the starting point attributed the Feng Shui as an important measure that determines the location and the shape of other buildings. The buildings location was appeared as having the conceptual buildings location as 'front office-back bedroom building (前朝後寢)' and 'three gates-three sectors (三問三朝)' as per the Rites of Zhou (周禮). On both palaces, Amisa is located on the benevolent point of the land, and the king's bed room buildings are located near the Amisa. The main offices were located on the south of the king's bed room buildings. By practicing this type of concept, consequently the king can receive the pure benevolent force first. In the case of the clearly distinguished locations of the buildings in Gyeongbokgung Palace, Chimjeon, Pyunjeon and Jungjeon were located on the same main qui stream. However, in Changdeokgung Palace where scattered qui stream is observed, the buildings are located on the scattered qui stream. The study found that the type of location of Jungjeon receives least amount of benefit from the Feng Shui but reflects primarily the king's authority rather than order and formality of the space.

• Korean Journal of Ichthyology
• /
• v.36 no.2
• /
• pp.109-119
• /
• 2024

This study was conducted to investigate the early life history by observing the egg development of Ladislavia taczanowskii in endangered fish and to use it as basic data for species conservation research. The broodstork used in the study was secured from the area of the Hongcheon River in Hongcheon-gun, Gangwon State. The broodstork, who was being raised in the laboratory, selected mature individuals in May 2021 and induced them to spawn by hormone injection. The size of the maturation egg was 1.50~1.79 (average 1.59±0.08, n=30) mm due to the circular invasive egg. The incubation time took 168 hours at 16.5℃ and 109 hours and 30 minutes at 25.5℃. Newly hatched larvae, the consonants had a total length of 5.55~6.31 mm (6.30±6.93, n=30) mm, and the mouth and anus did not open and had egg yolk. 5 days after hatching, the preflexion larvae had a total length of 9.91~10.8 (10.1±0.27, n=30) mm, and the mouth and anus opened, and feeding activities began. 8 days after hatching, the flexion larvae had a total length of 10.3~11.4 (10.8±0.38, n=30) mm, and the end of the vertebrae at the tail fin tip began to bend upward. 10 day after hatching, the postflexion larvae had a total length of 11.8~13.1 (12.3±0.43, n=30) mm, and the end of the vertebrae at the tail tip was completely bent at 45°. 18 days after hatching, the total length of the juveniles was 18.9~23.4 (20.4±1.69, n=30) mm, and the number of fins in each part was fin rays with 10 dorsal fins, 9 anal fins, 22 caudal fins, and 7 ventral fins. As a result of the study, the postflexion larvae showed differences in morphology from other Gobioninae fishes in the upper part of the tail's hypural, the shape of spots on the dorsal vertebrae, the vertical stripes developed on the head, and the irregularly deposited melanophore throughout the body.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.501-504
• /
• 2001

The effect of soil EC on tissue morphology of leaf and shoot tip in cucumber (Cucumis sativus L. cv. Euinchim-baekdadagi) seedlings was investigated. Number of trichomes on leaf upper epidermis increased with the increase in soil EC from 1.0 to $3.0dS{\cdot}m^{-1}$, but the shape and number of stomata on lower epidermis remained unchanged. Epidermal cells of cucumbers grown in EC $1.5dS{\cdot}m^{-1}$ soil was occupied mostly by large vacuole whereas those grown in EC $3.0dS{\cdot}m^{-1}$ soil were filled with a nucleus, mitochondria, chloroplast and other micro-organelles. Sponge parenchima cells were also larger and contained fewer chloroplasts at EC $1.5dS{\cdot}m^{-1}$ than those grown at EC $3.0dS{\cdot}m^{-1}$. Leaf thickness decreased at high EC and the color of epidermal cells became significantly darker on the photograph of optical microscope. Normal tissue differentiation was greatly suppressed in plants grown in soils with $3.5dS{\cdot}m^{-1}$ or higher EC.

• Korean journal of applied entomology
• /
• v.33 no.2
• /
• pp.60-65
• /
• 1994

This study was carried out to investigate the ecology of Nesodiprion japonlcus (Mmm,m) damaging many conifers The results obtained were as follows: Nesod~prion japonicus (Maun) emerged two times for a year and their body was black m both sexes. A female (10.1t 1 2 mm) adult was larger than a male (9.9t 0.8 mm) one in the body size. The size of antenna as plumose of female was different from that of male. Life span of adults was 3 or 4 days, those emergence rate was 92% and sex ratio of female to male was 6: 4. Adults 1a1d only an egg in the leaf and the region of the leaf aviposited turned brown. Duration of egg was 14.35 1 2 days, egg was In the shape of banana and red~sh-yellow,a nd its sire was 2.4+ 0.2 mm long. Duration of larvae was 30.35 2.1 days and its slze 20.15 2.2 mm, body was green with grey~sh shipes on the dorsal and lateral aspect, the tip of front and hind was yellow and head was brown with a dark-p~gmented area. Mature larva turned into light green and get lost a dark-pigmented area of head. The firstly-emerged larva made cocoons on the base of leaves and the secondawemerged larva among fallen leaves Duration of prepupa was 14.3f 2.0 days and their size 10.15 2.3 mm Duration of pupa was 12.2+ 1.3 days and its size 10.lt0.2mm.