• 한국연초학회지
• /
• 제4권1호
• /
• pp.29-35
• /
• 1982

Potassium deficiency symptoms were studied with flue-cured tobacco which was applied with different levels of compound fertilizer (10-15-20) ; 75kg, 100hg, and 125kg/10a. Ratio of N/$K_2O$ in leaves was increased from bottom to top stalk position due to the increase of nitrogen content in leaves. Nitrogen content in leaves was increased from stalk to tip as wall as from midrib to laminae, but vice versa in potassium content. Consequently, resulting in potassium deficiency symptoms in tip of leaves. Rate of reabsorption by rainfall during the latter part of growth was highest at top stalk position in case of nitrogen, but lowest in potassium. This observation was more evident with higher application rate of fertilizer. Nitrogen content of about 4 % in leaves of top stalk position applied with 125kg/10a was maintained up to 85days after trans planting. No increase in potassium in upper leaves was observed over the level of 100kg/10a fertilizer application. As the result, N/$K_2O$ ratio in leaves of top stalk position applied with 125kg/10a was kept at more than 1.0 up to 85days after transplanting, but it was less than 0.9 at 65days after tracts planting with less than 100kg/10a fertilizer application.

• Journal of Ship and Ocean Technology
• /
• 제8권1호
• /
• pp.10-30
• /
• 2004

High-fidelity RANS simulations are presented for a ducted marine propulsor, including verification ＆ validation (V＆V) using available experimental fluid dynamics (EFD) data. CFDSHIP-IOWA is used with $\textsc{k}-\omega$ turbulence model and extensions for relative rotating coordinate system and Chimera overset grids. The mesh interpolation code PEGASUS is used for the exchange of the flow information between the overset grids. Intervals V＆V for thrust, torque, and profile averaged radial velocity just downstream of rotor tip are reasonable in comparison with previous results. Flow pattern displays interaction and merging of tip-leakage and trailing edge vortices. In interaction region, multiple peaks and vorticity are smaller, whereas in merging region, better agreement with EFD. Tip-leakage vortex core position, size, circulation, and cavitation patterns for $\sigma=5$ also show a good agreement with EFD, although vortex core size is larger and circulation in interaction region is smaller.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.713-716
• /
• 2004

In this paper a dynamic behavior of a double-cracked cnatilver beam with a tip mass and the moving mass is presented. Based on the Euler-Bernoulli beam theory, the equation of motion is derived by using Lagrange's equation. The influences of the moving mass, a tip mass and double cracks have been studied on the dynamic behavior of a cantilever beam system by numerical method. The cracks section are represented by the local flexibility matrix connecting two undamaged beam segments. ,Therefore, the cracks are modelled as a rotational spring. Totally, as a tip mass is increased, the natural frequency of cantilever beam is decreased. The position of the crack is located in front of the cantilever beam, the frequencies of a double-cracked cantilever beam presents minimum frequency.

• 대한치과교정학회지
• /
• 제23권2호
• /
• pp.179-197
• /
• 1993

Tongue posture at rest position of Class III malocclusion is very important in malocclusion and phonation. Because Class III malocclusion shoves low tongue position, speech defect is commonly occured. This study was attempted to evaluate the correlationship between the tongue posture at rest position and during /s/ phonation and facial skeleton in centric occlusion. Thirty subjects with Class III malocclusion who had no orofacial defects such as cleft palate, medical history of neurologic pathology, hearing defect and any previous speech therapy were selected. Ninety sheets of lateral cephalometric radiographs taken at rest position, during /s/ phonation and centric occlusion were traced, measured and statistically analysed. The results obtained were as follows ; 1. In Class III malocclusion, the posture of tongue was positively correlated with the position of hyoid body. The hyoid body was positioned anteriorly and inferiorly as the vertical facial skeleton was increased in centric occlusion. 2. In Class III malocclusion, the vertical position of tongue tip at rest position was not correlated with facial skeleton in centric occlusion, but the horizontal position had low correlation with mandibular body length, APDI, and $\underline{1}$ to SN. 3. In Class III malocclusion, there was the tendency that the dorsal position of the tongue was lowered as the vertical facial skeleton was increased. 4. In Class III malocclusion, the vertical and horizontal position of tongue tip during /s/ phonation was not correlated with facial skeleton in centric occlusion.

• 말소리와 음성과학
• /
• 제3권4호
• /
• pp.33-43
• /
• 2011

The present study investigates supralaryngeal articulatory characteristics of denti-alveolar (coronal) stops /t, $t^h$, $t^*$/ and /n/ in /aCa/ context in Seoul Korean. An Electromagnetic Articulograph (EMA, Carstens) was used to explore kinematics of the consonants by examining the kinematic data of the tongue tip (the primary articulator for the coronal consonants), along with some additional supplementary position data of the tongue body, the tongue dorsum and the jaw. The results showed that the constriction duration was the most robust articulatory correlates of the three-way stop contrast with a pattern of /t/$t^h$/$t^*$/. The contrast was further reinforced by the tongue body position (higher for /$t^h$, $t^*$/) and the tongue tip opening displacement (less displaced for /$t^h$, $t^*$/). The articulation of /n/ was quite similar to that of the lenis /t/ in terms of the constriction duration, and it was different from the oral stops in that it was produced with larger tongue tip displacement and lower jaw position than the oral stops, indicating its weak articulatory nature. The results are also discussed in comparison with those of bilabial stops with implications that the three-way contrast may be kinematically expressed differently depending on the physiological constraints imposed on the primary articulator (the tongue tip versus the lips). The present study, therefore, provides new articulatory (kinematic) data of denti-alveolar consonants in Korean, and demonstrates that the three-way stops, that have been known to differ primarily in their laryngeal settings, are indeed produced with kinematic distinctions at the supralaryngeal level.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 추계학술대회 논문집
• /
• pp.155-159
• /
• 1991

This paper is a study on the Inverse dynamics of a one-1ink flexible robot arm which is control led by the transiational base motion. The system is composed of the flexible arm, the mobil stage, a DC servomotor, and a computer. The arm base is shifted so that the tip follows a desired path function. The tip Rotten is measured by the laser displacement sensor. The governing equations are based on the Bernoullie-Euler beam theory and solved by applying the Laplace transform method and then the numerical inversion method to the resulted equations. Tip responses obtained both theoretically and experimentally are in good agreement with the desired trajectory, which shows that the scheme of inverse dynamics is effective for the open-loop endpoint positioning of the flexible am driven by the translation stage.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.477-480
• /
• 2000

It is useful way to make indentations near crack tip in order to increase fatigue life or repair a fatigue crack. In this study, bending fatigue tests were performed to investigate the optimal position of the indentations near crack tip. The results shows that fatigue life of the specimen is dramatically increased by indentation and the most effective location is the back of the crack tip.

• 소성∙가공
• /
• 제14권6호
• /
• pp.570-576
• /
• 2005

Powder Injection Molding(PIM) has recently been recognized as an advanced manufacturing technology for low-cost mass production of metal or ceramic parts of complicated geometry With this regards, design technology of dental scaler tip PIM mold, which has complex shape and small core pin (diameter=0.6mm), with the help of computer-aided analysis of powder injection molding process was developed. Computer-aided analysis for dental scaler tip mold was implemented by finite element method with non-Newtonian fluid, modified Cross model viscosity, PvT data of powder/binder mixture. Compter-aided analysis results, such as filling pattern, weldline formation, air vent position prediction were compared with experimental result, and eventually have been shown good agreement. The core pin (diameter=0.6mm) deflection analysis of dental scaler tip PIM mold during PIM filling process was also investigated before mold fabrication.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권1호
• /
• pp.50-60
• /
• 2004

An experimental analysis using three-dimensional Laser Doppler Velocimetry(LDV) measurement and computational analysis using the Reynolds stress model in FLUENT are conducted to give a clear understanding of the effect of blade loading on the structure of tip leakage flow in a forward-swept axial-flow fan operating at the maximum efficiency condition ($\Phi$=0.25) and two off-design conditions ($\Phi$=0.21 and 0.30). As the blade loading increases, the onset position of the rolling-up of tip leakage flow moves upstream and the trajectory of tip leakage vortex center is more inclined toward the circumferential direction. Because the casing boundary layer becomes thicker and the mixing between the through-flow and the leakage jet with the different flow direction is enforced, the streamwise vorticity decays more fast with the blade loading increasing. A distinct tip leakage vortex is observed downstream of the blade trailing edge at $\Phi$=0.30, but it is not observed at $\Phi$=0.21 and 0.25.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.295-310
• /
• 2015

In the present study, an unstructured mixed mesh flow solver was used to conduct a numerical prediction of the aerodynamic performance of the S-76 rotor in hover. For the present mixed mesh methodology, the near-body flow domain was modeled by using body-fitted prismatic/tetrahedral cells while Cartesian mesh cells were filled in the off-body region. A high-order accurate weighted essentially non-oscillatory (WENO) scheme was employed to better resolve the flow characteristics in the off-body flow region. An overset mesh technique was adopted to transfer the flow variables between the two different mesh regions, and computations were carried out for three different blade configurations including swept-taper, rectangular, and swept-taper-anhedral tip shapes. The results of the simulation were compared against experimental data, and the computations were also made to investigate the effect of the blade tip Mach number. The detailed flow characteristics were also examined, including the tip-vortex trajectory, vortex core size, and first-passing tip vortex position that depended on the tip shape.