• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2000-2011
• /
• 2001

In this Paper, we convert conventional low speed(1x, 6x) DVD systems designed by analog PLL(Phase Locked Loop) into digital PLL to operate at high speed systems flexibly, and present optimal DPLL model in high speed(20x) DVD systems. Especially, we focused on the design of DPLL that can overcome channel effects such as bulk delay, sampling clock frequency offset and asymmetry phenomenon in high speed DVD systems. First, the modified Early-Late timing error detector as digital timing recovery scheme is proposed. And the four-sampled compensation algorithm using zero crossing point as asymmetry compensator is designed to achieve high speed operation and strong reliability. We show that the proposed timing recovery algorithm provides enhanced performances in jitter valiance and SNR margin by 4 times and 3dB respectively. Also, the new four-sampled zero crossing asymmetry compensation algorithm provides 34% improvement of jitter performance, 50% reduction of compensation time and 2.0dB gain of SNR compared with other algorithms. Finally, the proposed systems combined with asymmetry compensator and DPLL are shown to provide improved performance of about 0.4dB, 2dB over the existing schemes by BER evaluation.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.70-80
• /
• 1997

In this paper, the performances of two noncoherent code tracking loops, i. e., traditional code tracking loop(TCTL) and modified code tracking loop(MCTL) are analyzed and compared in a CDMA mobile environment. Closed-form formulas for steady-state jitter variance are derived analytically for the two schemes as a function of the pulse shaping filter, timing offset, signal-to-interference ratio, and loop bandwidth. The design issues of the loop filter are also addressed with emphasis on the second-order tracking loop. Finally, the degradation of BER performance due to timing errors is examined in a CDMA reverse link for IMT-2000 designed by ETRI.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.3
• /
• pp.109-118
• /
• 2016

The present paper proposes a method that can estimate a roll rate of spinning vehicles utilizing GPS receivers. The proposed method analyzes a relation between received signal and correlation value and utilizes a phenomenon that received signal power that changes according to a signal incident direction affects a correlation value. That is, a roll-rate estimation method using zero crossing detection method for correlation value, which has sinusoidal periodicity according to rotations of vehicles, is proposed. A correlation value in real environments experiences a jitter so that the proposed method includes a pre-processing filter and detection threshold setting way is also considered to reduce the effect of received signal power. In order to verify the operation of the proposed method and analyze the performance, a signal generator and software-defined receiver (SDR) are designed. The signal generator generates intermediate frequency (IF) signal by taking the rotation of vehicles, antenna gain, and signal power into consideration, and a correlation value is acquired by taking the generated IF signals into consideration. Using the generated correlation value, the operation of the proposed roll rate estimation method is verified and the performance is analyzed.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1120-1128
• /
• 2015

We propose a pseudo optical N-level pulse-amplitude modulation (PO PAM-N) signal using a few externally-modulated lasers (EMLs) operating at different wavelengths, which is suitable for upgrading the transmission speed over an optical link of < 10 km single-mode fiber with low-cost components. To compare a PO PAM-N signal with that of a standard optical PAM-N signal, we perform experiments for evaluating the performance of a 51.56-Gb/s PO PAM-4 signal and standard 51.56-Gb/s optical PAM-4 signal. The receiver sensitivity (at $BER=10^{-5}$) of the PO PAM-4 signal is 1.5 dB better than the receiver sensitivity of a standard optical PAM-4 signal. We also investigate the feasibility of PO PAM-N (N = 4, 8, and 16) signals operating at 103.12 Gb/s, considering relative intensity noise, timing jitter, extinction ratio (ER) of EMLs, and dispersion. From the results, a PO PAM-8 signal performs better than PO PAM-4 and PO PAM-16 signals at 103.12 Gb/s. Finally, we suggest a timing control method to suppress the effect of dispersion in a PO PAM-N signal. We show that the tolerance to dispersion of a 103.12-Gb/s PO PAM-8 signal can be improved to ${\pm}40ps/nm$ by applying a proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1291-1298
• /
• 1998

In this paper, a simple algorithm for detection of timing error of a synchronous, band-limited, multi-level data stream is proposed. The proposed algorithm can be applied to multi-level PAM, M-ary PSK, or M-ary QAM. The proposed algorithm for M-ary PSK requires only two samples per symbol for its operation, and it is based on the concept of transition logic table and transition level table. In orer to prove the steady-state operation of the proposed algorithm, its performance is evaluated and compared to BECM by Monte Carlo simulation method under Gaussian noise and fading noise channel environments. The comparison results confirm that the perforance of proposed algorithm is superior to that of BECM in jitter characteristics.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.147-150
• /
• 2013

본 논문에서는 A/V라우터, SDI to HDMI 비압축신호변환기 등 방송장비에서 주로 사용되는 SDI(Serial Digital Interface) 신호의 입력감도 특성이 케이블 길이에 따라 특성이 어떻게 변화되는가를 분석하기 위해 케이블 길이에 따른 신호의 특성을 분석하였다. 특성의 확인을 위해 ITU 및 SMPTE 표준에서 규정하는 Rise/Fall Time, Timing/Alignment Jitter 값과 PSNR 값을 활용하였다. 본 논문은 전송률에 따른 케이블 길이 변화를 비교 시험하여 방송장비 제조사에서 권고하는 케이블 길이에 대한 신뢰도 확인 및 실 사용 환경에서의 케이블 길이 고려 등을 위해 필요한 데이터를 추출하였으며, 향후 시험규격개발에 중요한 자료로 활용될 것으로 기대된다.

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.19-24
• /
• 2014

We report stable, wideband, flat-topped, 10 GHz optical frequency comb generation from a semiconductor-based mode-locked ring laser with an intra-cavity high finesse Fabry-Perot etalon. We demonstrate a stable 10 GHz comb with greater than 200 lines within a spectral power variation below 1 dB, which is the largest value obtained from a similar mode-locked laser in our knowledge. Greater than 20 dB of the spectral peak to deep ratio at 0.02 nm resolution, ~92 femtosecond timing jitter over 1 kHz to 1 MHz range, and non-averaged time traces of pulses confirm very stable optical frequency comb lines.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.852-855
• /
• 2002

This paper presents a design of FIR near-equiripple Nyquist filters having zero-intersymbol interference (ISI) and low sensitivity to timing jitter, with coefficients taking only discrete values. Using an affine scaling linear programming algorithm, an optimum discrete coefficient set can be obtained in a feasible computational time. Also presented is a pipelined multiplier-free FIR filter realization with periodically time-varying (PTV) coefficients based on a hybrid form suitable for Nyquist filter. The realization exploits the coefficient symmetry to reduce the hardware by about one half. High speed computation and low power consumption are achieved by its pipelined and low fan-out structure.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.109-112
• /
• 2005

ATSC 지상파 DTV 시스템에서 심볼 타이밍 동기 성능 개선을 위한 알고리즘을 제안한다. 일반적으로 심볼 타이밍 동기를 위해 사용되는 가드너 방법은 다중 경로 페이딩 환경에서 성능이 좋지만 지터에 의해 성능 열화가 발생한다. 지터량는 루프 필터 대역폭이 작을수록 작아지지만, 수렴속도는 느려지게 된다. 수렴속도는 빠르면서 수렴 후 지터량를 감소시키기 위해 일정시간마다 루프필터의 출력 값을 평균하고 이 평균값을 이용하여 옵셋량을 추정한 후 추정된 옵셋의 변화율에 따라 루프 필터의 대역폭을 줄여 지터의 크기를 줄이는 알고리즘을 제안한다.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.969-972
• /
• 2000

This paper proposes 1.5V-3GHz CMOS PLL with a new delay cell for operating in high frequency and multi chained two stage VCO to improve phase noise performance. The proposed multi-chained architecture is able to reduce a timing jitter or a transition spacing and the newly VCO is operating in high frequency. The PFD circuit designed to prevent fluctuation of charge pump circuit under the locking condition. Simulation results show that the tuning range of proposed VCO is wide at 1.8GHz-3.2Ghz and power dissipation is 0.6mW.