• 한국간담췌외과학회지
• /
• 제27권1호
• /
• pp.20-27
• /
• 2023

There are many variations and unclear definitions of the appropriate timing of laparoscopic cholecystectomy (LC) after endoscopic retrograde cholangiopancreatography (ERCP), and there is still a lack of consistency about the appropriate timing. Inappropriate timing can be associated with serious comorbidity and can affect the patients. This meta-analysis was conducted to assess the operative outcomes and morbidity to provide a benefit to the patients based on the best timing of LC after ERCP. Randomized controlled trials (RCTs) and retrospective studies were identified from the PubMed and Scopus databases from inception to July 2021. A meta-analysis was performed to estimate the treatment effects on operative outcomes and morbidity. Four RCTs and four retrospective studies met our inclusion criteria. A meta-analysis indicated that patients who received LC after ERCP on the same day or within 72 hours had about 0.354 days shorter length of hospital stay with a shorter operative time of about 0.111-1.835 minutes and a lower risk of complications around 37%-73%. Our evidence suggests that the appropriate timing of LC after ERCP is either the same day or within 72 hours for treating cholelithiasis patients based on the severity of disease.

• 한국통신학회논문지
• /
• 제21권6호
• /
• pp.1554-1566
• /
• 1996

In this paper, a new symbol timing algorithm for a magnetic recording system as HDD, is proposed. Above all, the Lorentzian channel model applied, the distortion and the attenuation problems of playback signals at high speed and storage density were considered. The structure and the operation of popular data detectors for HDD were understood, and the adopted symbol timing algorithm were profoundly analyzed. On the basis of these understanding and analysis, a new symbol timing algorithm for high density HDD was proposed, and the performance evaluation of this proposed algorithm was done.

• Journal of information and communication convergence engineering
• /
• 제22권2호
• /
• pp.89-97
• /
• 2024

This research conducted a comparative analysis of two communication systems. The first system utilizes a conventional series configuration consisting of a symbol-rate least mean square (LMS) equalizer followed by a timing recovery loop. The second system introduces an innovative approach that integrates a symbol-rate LMS equalizer and a timing recovery component within a single loop, allowing mutual feedback between the two blocks. In this integrated system, the equalizer also provides timing error information, thereby eliminating the requirement for a separate threshold error detector. This study examines the performance curves of both system configurations. The simulation results revealed that the integrated system may offer improved stability in terms of multiple transmission challenges, including phase and frequency offsets and intersymbol interference. Further analysis and discussion highlight the significant insights and implications of the proposed architecture. Overall, the present findings provide an alternative perspective on the joint implementation of equalization and timing recovery in communication systems.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권2호
• /
• pp.89-96
• /
• 2015

Based on multi-body dynamic software RecurDyn, this paper proposes a modified form of timing silent chain system combing with the existing problem that vibration and chain tension is too large, which is applied for complicated conditions in a V-type engine, such as high speed, variable loads. The analysis of chain drive meshing characteristics is completed. Using the multi-body dynamic soft-ware RecurDyn, the dynamics characteristics of the improved system is studied, including chain tension, transmission error, chain fluctuations, equivalent spring force in different operating conditions. The study results show that chain tension, transmission error, chain fluctuation and equivalent spring force are within the scope of permission, all of them can meet the design requirement. There-fore, the design of this system is reasonable and practicable. The research results will provide a basis for assessing timing silent chain system in a V-type engine and a theoretical reference for designing and optimizing the timing silent chain system.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.1077-1088
• /
• 1996

In this paper, we propose a new method to analyze the performance degradation by timing jitters in the receivers of intensity modulation/direct detection digital optical communication systems where pulse-shaping filters are used to minimize intersymbol interference. The results obtained from the proposed analytical method show that conventional analytical methods underestimate the influence of timing jitters on the receiver performance. Using the proposed anlaytical method, we derive an analytic equation for approximated power penalty due to timing itters and obtain an exact power penalty by numerical analyses. Assuming Gaussian or uniform probability density function for timing jitters, we also show that assumption of Gaussian distribution for timing jitters yields more performance degration than that of uniform distribution.

• 전자공학회논문지S
• /
• 제34S권7호
• /
• pp.28-38
• /
• 1997

Previously, we have proposed the M-BECM(Modified-Band Edge Component Maximization), which is a symbol synchronization algorithm based on spectral line method for all-digital high speed digital communications. However, Until now, the characteristics of the timing detector based on the spectral line method including M-BECM was not analyzed, particularly the effect of a timing offset at the optimal convergence pont. In this paper, we analyze the timing dtector's characteristics of the M-BECM and present optimal design value. First, the expression for the timing detector's mean value(often called its S-Curver) as a function of the normalized symbol timing offset is derived. Next, the P $D_{bias}$, the value for compensating the timing offset at an optimal convergence point, and the bandwidth of bandpass filter in the timing detector are calculated. It is also shown and analyzed that the P $D_{bias}$ is affected by varuous factors such as the excess bandwidth of input signal, frequency offsets, noise and particularly, the excess bandwidth of input signal is a major parameter to decide P $D_{bias}$. Finally, analytic resutls are compared to simulation results.

• 한국통신학회논문지
• /
• 제14권5호
• /
• pp.472-485
• /
• 1989

광대역 화상정보신호(TV방송파)의 이동수신에 의한 화상품질영화는 고정수신의 경우와는 전혀 다른 상황을 타나내며, 이동체의 이동과 더불어 시시각각 복잡하게 변화한다. 본 논문에서는 야외 및 실내에서의 기초적 실험에 의해 텔레비 이동수신에서 Fluttering ghost가 화상품질열화원인중 가장 중요하다고 생각하여, 그 발생원인과 특성을 조사했다. Fluttering ghost는 텔레비 수상기에서 재생되는 수평동기펄스의 동기시각이 다중파간섭 페이딩에 의해 불안정하게 변동하므로서 발생한다는 것을 알았다. 따라서, H-sync pulse timing의 다중파 조건에 대한 변화를 이론적으로 해석하고 그 특성을 밝혀 동기시간변동의 조건과 원인을 밝혔다.

• 한국정보처리학회논문지
• /
• 제6권8호
• /
• pp.2204-2212
• /
• 1999

본 논문에서는 허위 경로 문제를 해결하고 지연 시간 정보를 추출해내는 지연 시간 부울법을 이용하여 조합 회로에서 증가적 지연 시간 검사를 수행할 수 있는 방법을 제시한다. 내부 출력단에서 대치되는 내부 입력단의 히스토리를 작성하고 외부 출력단의 활성화 경로를 검사하여 최대 지연 시간을 구한다. 이때 외부 출력단의 히스토리를 참조하여 변형된 지연 시간을 적용시켜 다시 외부 출력단의 최대 지연 시간을 구할 수 있다. 이 방법으로 일단 외부 출력단의 근지연항의 합을 구하면 내부 회로의 지연 시간이 변하더라도 이미 구해 놓은 외부 출력단의 근지연항의 합으로써 빠르고 효율적으로 최대 지연 시간과 입력값을 추출해 낼 수 있다. 회로의 구조가 변경되었을 때 전체 회로를 다시 계산해야 할 필요는 없다. 전체 회로를 검사하여 변경된 구조의 영향을 받아서 다시 계산해야 할 필요가 있는 게이트를 선택하고 이 선택된 게이트만을 계산하여 부분적인 지연 시간 분석을 행할 수 있다. 이러한 증가적 지연 시간 분석은 회로의 지연 시간의 변화 뿐만 아니라 회로 구조의 변화를 고려하였고, 기존의 지연 시간 분석에 비해 회로 설계시 성능 시험 단계에서 생기는 시행 착오의 비용을 줄일 수 있다.

• Journal of Korean Neurosurgical Society
• /
• 제66권4호
• /
• pp.438-445
• /
• 2023

Objective : Preoperative transarterial embolization (TAE) of tumor feeders in hypervascular spine metastasis is known to reduce intraoperative estimated blood loss (EBL) during surgery. The effect of TAE varies for several reasons, and one controllable factor is the timing between embolization and surgery. However, the adequate timing remains unclear. This study aimed to evaluate the timing and other factors that reduce EBL in spinal metastasis surgery through a meta-analysis. Methods : A comprehensive database search was performed to identify direct comparative studies of EBL stratified by the timing of surgery after TAE for spinal metastasis. EBL was analyzed according to the timing of surgery and other factors. Subgroup analyses were also performed. The difference in EBL was calculated as the mean difference (MD) and 95% confidence interval (CI). Results : Among seven studies, 196 and 194 patients underwent early and late surgery after TAE, respectively. The early surgery was defined as within 1-2 days after TAE, while the late surgery group received surgery later. Overall, the MD in EBL was not different according to the timing of surgery (MD, 86.3 mL; 95% CI, -95.5 to 268.1 mL; p=0.35). A subgroup analysis of the complete embolization group demonstrated that patients who underwent early surgery within 24 hours after TAE had significantly less bleeding (MD, 233.3 mL; 95% CI, 76.0 to 390.5 mL; p=0.004). In cases of partial embolization, EBL was not significantly different regardless of the time interval. Conclusion : Complete embolization followed by early spinal surgery within 24 hours may reduce intraoperative bleeding for the patients with hypervascular spinal metastasis.

• 한국건축시공학회지
• /
• 제4권4호
• /
• pp.135-142
• /
• 2004

The purpose of this study is to predict remodeling timing of Permanent Rental Housing through historic data and cash flow analysis. For this aim, the study has estimated cash flow of Permanent Rental Housing considering initial construction costs, government supporting fund, rental incomes and maintenance expenses. Based on the expected cash flow analysis, reasonable remodeling timing is predicted for Permanent Rental Housing. The results of this study are as follows: (1) it is analyzed that building a8e of about 27 years is the best time for remodeling because cumulative surplus amounts reach maximum level, (2) it is required that remodeling should be made before 34 years of age roughly because cumulative surplus amounts change into minus from this time.