• 한국산업보건학회지
• /
• 제33권1호
• /
• pp.3-5
• /
• 2023

Objective: This study introduces exposure concentrations of time-weighted average standard (TWA) evaluation and short-time exposure standard (STEL) evaluation for trichloroethylene in the cleaning process. Methods: Trichloroethylene measurement was conducted according to the KOSHA Guide (A-24-2019) method. It was carried out twice. Results: As a result of the first measurement, TWA concentration exceeded 4 times the exposure standard and STEL concentration exceeded 16 times, but the inaccuracy and breakthrough of the collection time could not be considered, so the second measurement was conducted. The second measurement result was lower than the first measurement result, but exceeded the exposure standards (TWA, STEL). Conclusions: We were able to confirm that the exposure level of workers in the cleaning process using trichloroethylene exceeded the exposure standard. And it is also considered necessary to grasp the approximate concentration using a detector tube in the preliminary survey.

• 한국경영과학회지
• /
• 제39권1호
• /
• pp.1-12
• /
• 2014

This article proposes a variable sampling interval (VSI) $\bar{X}$ control chart using weighted standard deviation (WSD) method for skewed populations. The WSD method decomposes the standard deviation of a quality characteristic into upper and lower deviations and adjusts control limits and warning limits of a control chart in accordance with the direction and degree of skewness. A control chart constant is derived for estimating the standard deviation of skewed distributions with the mean of sample standard deviations. The proposed chart is compared with the conventional VSI $\bar{X}$ control chart under some skewed distributions. Simulation study shows that the proposed WSD VSI chart can control the in-control average time to signal (ATS) as an adequate level better than the conventional VSI chart, and the proposed chart can detect a decrease in the process mean of a quality characteristic following a positively skewed distribution more quickly than the standard VSI chart.

• 품질경영학회지
• /
• 제34권4호
• /
• pp.125-132
• /
• 2006

An adjusted control limit of the $\overline{X}$ chart is proposed for monitoring the continually improving processes. The continual improvement of the process implies the decrease of the process variance, which is represented by a logistic curve. The process standard deviation is estimated by the exponentially weighted moving average of the sample standard deviations from the past to the current times. The control limits are adjusted by the estimated standard deviation at every sampling time. The performance of the adjusted control limit is compared with that of the standard control limits for various cases of the decreasing speed and size of the variance. The results show that the $\overline{X}$ chart with the adjusted control limits provides better performances for monitoring the small and moderate shifts in continually improving processes.

• Journal of Welding and Joining
• /
• 제8권1호
• /
• pp.31-42
• /
• 1990

Arc must be stable during welding first of all other factors for obtaining sound weldment, especially in the automation of welding process. Arc stability is somewhat sophisticated phenomenon which is not clearly defined yet. In consumable electrode welding, the voltage and current variation due to metal transfer enables to assess arc stability. Recently, statistical analyses of the voltage and current waveform factors are performed to assess the degress of arc stability which is assessed and controlled by operator's own experience by now. But, considering the increasing need and the trend of automation of welding process, it is necessary to monitor arc stability in real-time. In this sutdy, the modified stability index composed of two voltage and current wvaeform factors (arc time and short circuit time) reduced from four factors (arc time, short circuit time, average arc current and average short circuit current) in Mita's index by the welding electrical circuit modeling is proposed and verified by experiments to be well estimating arc stability in the static sense. Also, the recursive calculation form estimating present arc stability in the dynamic sense is developed for real-time estimation. The results of applying the recursive index during welding show good estimation of arc stability in real-time. Therefore, the results of this study offers the mean for real-time control arc stability.

• 응용통계연구
• /
• 제31권2호
• /
• pp.205-216
• /
• 2018

본 논문에서는 모형 기반 GARCH 변동성, 실현변동성(realized volatility; RV), 역사적 변동성(historical volatility), 지수가중이동평균(exponentially weighted moving average; EWMA) 등 다양한 변동성 추정 방법을 소개하고, 실현변동성에 비대칭 효과(leverage effect)를 반영한 분계점 실현변동성(threshold-asymmetric realized volatility; T-RV)을 제안하였다. 또한, 예시를 위해 KOSPI 고빈도 수익률 자료의 변동성을 분석하였다.

• 한국BIM학회 논문집
• /
• 제13권2호
• /
• pp.1-15
• /
• 2023

Since the 1960s, the Korean Peninsula, which consists of 77.4 of the country's land and mountains, has seen a surge in demand for buildings due to population concentration due to urbanization and industrialization. Since then, the development of slopes has been inevitable due to the concentration and expansion of the city's population. When building a building on a slope, it is important to set the height of the surface. In this case, the means of regulating buildings in construction-related laws, such as the building closure ratio, floor area ratio, number of floors and total floor area of buildings, have an overall effect on buildings through the height of the surface. In the Korean Building Act, the setting of the height of the ground affects the calculation of the building height limit standard and the calculation of the underground floor, and it takes a long time to calculate. Therefore, the time required for attempts to change various design plans of buildings increases. The purpose of this study is to speed up the time required to calculate the weighted average of the surface when constructing buildings on slopes. In addition, the existing calculation process allows various design attempts compared to the same time given.

• 대한원격탐사학회지
• /
• 제28권6호
• /
• pp.635-651
• /
• 2012

To produce a level-3 monthly composite image from daily level-2 Sea-viewing Wide Field-of-view Sensor (SeaWiFS) chlorophyll-a concentration data set in the East Sea, we applied four average methods such as the simple average method, the geometric mean method, the maximum likelihood average method, and the weighted averaging method. Prior to performing each averaging method, we classified all pixels into normal pixels and abnormal speckles with anomalously high chlorophyll-a concentrations to eliminate speckles from the following procedure for composite methods. As a result, all composite maps did not contain the erratic effect of speckles. The geometric mean method tended to underestimate chlorophyll-a concentration values all the time as compared with other methods. The weighted averaging method was quite similar to the simple average method, however, it had a tendency to be overestimated at high-value range of chlorophyll-a concentration. Maximum likelihood method was almost similar to the simple average method by demonstrating small variance and high correlation (r=0.9962) of the differences between the two. However, it still had the disadvantage that it was very sensitive in the presence of speckles within a bin. The geometric mean was most significantly deviated from the remaining methods regardless of the magnitude of chlorophyll-a concentration values. Its bias error tended to be large when the standard deviation within a bin increased with less uniformity. It was more biased when data uniformity became small. All the methods exhibited large errors as chlorophyll-a concentration values dominantly scatter in terms of time and space. This study emphasizes the importance of the speckle removal process and proper selection of average methods to reduce composite errors for diverse scientific applications of satellite-derived chlorophyll-a concentration data.

• 대기
• /
• 제24권3호
• /
• pp.365-378
• /
• 2014

The limits of S-band dual-polarization radars in Korea are not reflected on the recent weather forecasts of Korea Meteorological Administration and furthermore, they are only utilized for rainfall estimations and hydrometeor classification researches. Therefore, this study applied four merging methods [SA (Simple Average), WA (Weighted Average), SSE (Sum of Squared Error), TV (Time-varying mergence)] to the QPE (Quantitative Precipitation Estimation) model [called RAR (Radar-AWS Rainfall) calculation system] using single-polarization radars and S-band dual-polarization radar in order to improve the accuracy of the rainfall estimation of the RAR calculation system. As a result, the merging results of the WA and SSE methods, which are assigned different weights due to the accuracy of the individual model, performed better than the popular merging method, the SA (Simple Average) method. In particular, the results of TVWA (Time-Varying WA) and TVSSE (Time-Varying SSE), which were weighted differently due to the time-varying model error and standard deviation, were superior to the WA and SSE. Among of all the merging methods, the accuracy of the TVWA merging results showed the best performance. Therefore, merging the rainfalls from the RAR calculation system and S-band dual-polarization radar using the merging method proposed by this study enables to improve the accuracy of the quantitative rainfall estimation of the RAR calculation system. Moreover, this study is worthy of the fundamental research on the active utilization of dual-polarization radar for weather forecasts.

• 대한소아치과학회지
• /
• 제48권2호
• /
• pp.209-220
• /
• 2021

소음은 불쾌감과 신체적 변화를 일으키는 원치 않는 소리로 정의된다. 이 연구는 진료실 환경에서 발생하는 소음의 강도를 평가하고 소아치과의사의 소음환경을 조사하기 위해 시행되었다. 사람의 양측 귀 형태를 재현한 마이크와 휴대용 소음계를 활용하여 소음을 녹음하고 소음의 강도를 계산하였다. 한국 고용노동부 산하 안전보건공단의 소음 측정 규정에 따라 시행하여 다음과 같은 결과를 얻었다. 16일 간 시행한 결과 8시간-가중평균소음수준은 최고 58.54 dBA, 최저 33.97 dBA, 평균 49.33 dBA로 측정되었으며 누적소음노출량은 최고 1.28%, 최저 0.04%, 평균 0.49%로 측정되었다. 이는 한국 안전보건공단의 기준치인 85 dBA에 미치지 못하는 값이다. 협조도와 술식에 따른 환자별 최고 소음수준을 비교하였을 때 치수치료 군과 Frankel grade 1등급 군이 가장 높았다. 소아치과의사의 소음환경은 한국 안전보건공단이 제시한 근로자의 작업환경 기준에는 미치지 못했지만 소아치과 진료실의 환경을 고려한 새로운 기준을 마련하여 소음 환경을 재평가할 필요가 있다.

• 한국수자원학회논문집
• /
• 제54권11호
• /
• pp.925-932
• /
• 2021

가뭄-홍수 급변사상은 가뭄과 홍수가 중첩된 사상으로, 생태계뿐만 아니라 산업과 농업 그리고 사회경제까지 큰 영향을 미치기 때문에 가뭄이나 홍수의 개별 사상보다 대처하기 어렵다. 하지만 국내의 가뭄-홍수 급변사상에 대한 연구는 부족한 실정이다. 본 연구에서는 표준가중평균강수(SWAP) 지수를 사용하여 가뭄-홍수 급변사상의 특성들을 분석하였다. SWAP 지수는 일강수량에 시간 가중치를 적용한 가중평균강수(WAP) 지수를 표준화 것으로, 한강유역의 중권역별 면적평균강수량(1966-2018년)을 사용해 산정하였다. SWAP 지수는 가뭄·홍수의 단일사상 분석 뿐 아니라 가뭄-홍수 급변사상을 분석하는데 용이하고, 시간의 척도 측면에서도 유연하게 사용할 수 있다. 또한, 심각도 K를 사용해 가뭄-홍수 급변사상의 상대적인 심각도를 지역별로 분석할 수 있다. 연구 결과, 한강유역 30개의 중권역 중 20개의 중권역이 시간이 지남에 따라 가뭄-홍수 급변사상의 심각도가 상승하는 추세가 확인되었고, 중권역별 가뭄-홍수 급변사상의 발생 빈도와 심각도 등을 고려하여 위험지역을 확인할 수 있었다. 예를 들어, 한강유역 내 가뭄-홍수 급변사상으로 인한 위험지역은 남한강상류(#1001) 유역으로 나타났다.