• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.9
• /
• pp.385-392
• /
• 2015

In IoT(Internet of Things), it is important for wireless networks to communicate data created among resource-constrained wireless nodes, where time synchronization is needed for meaningful data creation and transmission. Time Synchronization by flooding is one of the mostly used protocols for WSN(Wireless Sensor Networks). Even though this type of scheme has some advantages over other types (i.e. a simple algorithm and independency of topology and so on), too many data transmission is required, leading to large power consumption. So, reducing transmission data is an important issue for energy efficiency in this kind of networks. In this paper, a new Flooding-based time synchronization protocol is proposed to use energy efficiently by reducing a transmitted traffic. The proposed scheme's performance has been evaluated and compared with an representative scheme, FTSP(Flooding Time Synchronization Protocol) by simulation. The results are shown that the proposed scheme is better than FTSP.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.1
• /
• pp.7-13
• /
• 2005

In this paper, we propose the time synchronization module on fiber optic repeater to use optic line delay for obtaining time synchronization between up-link and down-link, in the 2.3 GHz WiBro network using TDD/OFDM (Time Division Duplex/Orthogonal Frequency Division Multiplexing) Generally, when we use fiber optic repeater to remove the shade area, it occurs transmission delay which is caused by optic transmission between RAS (Radio Access Station) and fiber optic repeater and inner delay of fiber optic repeater. Because the WiBro system is adopting a TOO method and there exists the difference of switching time which is caused by these delay between up-link and down-link, it occurs ISI (Inter Symbol Interference), ICI (Inter Carrier Interference). These interference results in the reduction of the coverage. And the inconsistency between Up-Link and Down-Link switching time maybe gives rise to the interruption of communication. In order to prevent these cases, we propose synchronization module using analog optic line delay as the one of synchronizing up-link and down-link. And we propose the consideration factor for the designing time synchronization module and the feature of optic line of analog method. The measurement result of optic line time synchronization module of structure proposed is as follows, the delay error of $0.5{\mu}g$ and the insertion loss value below maximum 4.5dB in range of $0{\sim}40{\mu}s$. These results fully meet the specification of WiBro System.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.6
• /
• pp.669-675
• /
• 2014

In this paper, we described the investigated theoretical time synchronization performances and experiment results obtained by commercially provided PTP (Precise Time Protocol) modules when the time of a slave clock is synchronized to the master clock. In the case of the theoretical performance analysis, we investigated 3 types of clock levels such as Crystal Oscillator (XO), TCXO (Temperature Compensated XO) and OCXO (Oven Controlled XO). From the analysis, it was observed that the synchronization performance is greatly influenced by the synchronization period and the required performance under 1 us can be achieved by using XO level clocks when the synchronization period is less than 2 seconds and the uncertainty of the propagation delay is under 100 ns. For the experiments using commercial PTP modules, the synchronization performance was investigated for direct, through 1 hub and through 2 hubs connections between the master clock and the slave clock. From the experiment results, we observed that time synchronization under 90 ns with 1,000 seconds observation interval can be achieved in the case of direct connection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.449-454
• /
• 2008

As demand for the application in multimedia networks is increasing rapidly, it is important to provide these services in Mobile Environments (ME). Obtaining to multimedia services which satisfy synchronization constraints in ME and improving the delay time and Quality of Service(QoS) between media streams to be presented, new specification model has to be proposed. In this paper we propose Mobile Synchronization Model(MSM) as a new specification model for describing efficiently the QoS and the delay time. Also, we propose the multimedia synchronization algorithm where is a dynamic synchronization method that minimizes the effects of adaptive transmission delay time. The proposed model has higher the guarantee of QoS such as the loss rate and the playout rate than it of the previous work.

• Journal of electromagnetic engineering and science
• /
• v.12 no.3
• /
• pp.223-225
• /
• 2012

In this paper, we develop a symbol/frame time and carrier frequency synchronization scheme for multi-carrier signaling in wireless mobile channels. The proposed scheme achieves simultaneous time synchronization and carrier frequency offset estimation. Simulation results show that the frequency offset of multiple sub-carrier spacings can be estimated and that performance is improved with robustness regardless of the cyclic prefix length.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.7
• /
• pp.622-626
• /
• 2012

This paper presents synchronization of LTV (Linear Time-Varying) MAS (Multi-Agent Systems) with heterogeneous time-varying disturbances under a fixed, connected, and undirected communication network. All the agents can collect only relative state information from their neighborhoods. To achieve synchronization of the MAS, an integral control scheme is proposed based on relative state information between agents.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.953-960
• /
• 2002

Rel-time application programs have constraints which need to be met between media-data. It is client-leading synchronization that is absorbing variable transmission delay time and that is synchronizing by feedback control and palyout control. It is the important factor for playback rate and QoS if the buffer level is normal or not. This paper, The method of maintenance buffer normal state transmits in multimedia server by appling feedback of filtering function. And synchronization method is processing adaptive playout time for smooth presentation without cut-off while media frame is skip. When audio frame which is master media is in upper threshold buffer level we decrease play out time gradually, low threshold buffer level increase it slowly.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.446-457
• /
• 2007

In wireless sensor network, to provide the proper responses quickly for diverse events, wireless sensor nodes have to cooperate with each other. For successful cooperation, the time synchronization among sensor nodes is an important requirement for application execution. In the wireless sensor network, the message packets including time information are used for the time synchronization. However, the transmission of many message packets will exhaust the battery of wireless sensor nodes. Since wireless sensor nodes works on the limited battery capacity, the excessive transmission of message packets has an negative impact upon their lifetime. In this paper, the Reference Interpolation Protocol (RIP) is proposed to reduce the number of message packets for the time synchronization. The proposed method performs the time interpolation between the reference packet's time and the global time of the base station. The proposed method completes the synchronization operation with only 2 message packets when compared to the previous Reference Broadcast Synchronization (RBS) technique. Due to the simple synchronization procedure, our method greatly reduces the number of synchronization messages and showed the 12.7 times less power consumption than the RBS method. From the decrease in the transmission of message packets, the convergence time among wireless sensor nodes is shortened and the lifetime of wireless sensor nodes is also prolonged as much as the amount of saved battery energy.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.1
• /
• pp.53-57
• /
• 2005

When concurrency is integrated to programming language, problem more than inheritance remains yet. Because more than inheritance happens by collision or cross fire between synchronization and inheritance of same time object, when synchronization code is not detached properly from method code about same time object, it makes expanded of code to make derivation class change synchronization code of super class and method code. In this paper, minimize right of inheritance method, When subclass is introduced to new synchronization limitation condition, wish to solve problem more than inheritance of three types that happen in same time programming embodying C++ class that do so that can avoid alteration of method reed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.264-274
• /
• 2014

Time synchronization becomes a critical issue in underwater acoustic networks (UANets) because nodes cooperate together or individually work by communicating each other in diverse underwater applications. Compared with the time synchronization approaches in terrestrial networks, several intrinsic limitations of UANets (e.g., the unavailability of GPS, long propagation delay, mobility due to currents, limited energy consumption, or low data rate) need to be considered in synchronizing the timing among underwater nodes. For the purpose of developing more efficient time synchronization protocols for UANets, we review the existing approaches, which estimate both the clock offset and the clock skew of underwater nodes. Finally, we outline the state-of-the art time synchronization protocols for UANets by comparing and summarizing them according to their synchronization characteristics.