• 복합신소재구조학회 논문집
• /
• 제5권2호
• /
• pp.27-32
• /
• 2014

Since the collapse of historical masonry structures in Europe in the late 1990's, the interests in understanding the long-term effect of masonry under sustained compressive stresses have increased. That requires combining the significance of time-dependent effects of creep with the effect of damage due to overstress to realize the evolution of cracks and then failure in masonry. Meanwhile, composite analysis of masonry columns was proven effective for realizing ultimate strength capacity of masonry column. In this study, a simplified mechanical model with step-by-step in time analysis was proposed to incorporate the interaction of damage and creep to estimate the maximum stress occurred in masonry. It was examined that the interaction of creep and damage in masonry can accelerate the failure of masonry.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.220-227
• /
• 2004

본 논문에서는 기존의 무선 PKI에서 개선되어야 할 여러 가지 사항 중에서 핸드오버시 인증서 획득시간을 단축하기 위한 새로운 인증구조에서의 블러킹 확률 분석을 알아보고자 한다. 기존의 키 교환방식에서 키 교환 설정단계가 단순히 이산대수문제에 근거하여 수행되었지만 인증서 시간단축을 위한 무선 PKI 인증구조의 상호인증과정에서는 키 교환 설정단계에서 타원곡선을 적용하였다. 제안한 무선 PKI 구조 안에서의 핸드오버 방법과 블러킹 확률 분석에 대하여 알아보았다.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.143-149
• /
• 2016

In this study, a series of numerical simulation of dam break flow was conducted using EFDC model, and input conditions including cell size, time step, and turbulent eddy viscosity were considered to analyze parameter sensitivity. In case of coarse mesh layout, the propagated length of the shock wave front was ${\Delta}_x$ longer than that of other mesh layouts, and the velocity results showed jagged edge, which can be cured by applying fine grid mesh. Turbulent eddy viscosity influenced magnitude of the maximum velocity passing through gate up to 20% and the cell Peclet number less than 2.0 ensured no numerical oscillations.

• 오토저널
• /
• 제12권6호
• /
• pp.48-59
• /
• 1990

A finite element program was developed using line elements for simulating the stretch/draw forming operation of an arbitrarily-shaped plane-strain section. An implicit, incremental, updated Lagrangian formulation is employed, introducing a minimum plastic work path assumption for each time step. Geometric and material nonlinearities are also considered within each time step. The finite element equation is based on the mesh-normal, which compatibly describes arbitrary tool surfaces and FEM meshes without depending on the explicit spatial derivatives of tool surfaces. The membrane approximation is adopted under the plane stress assumption. The sheet material is assumed to obey a rigid-viscoplastic constitutive law. The developed program was tested in the die-tryout of typical automotive inner panels. In order to determine a single friction coefficient and boundary length, FEM results and measurements of thinning for a stretched section of final die were compared. After finding analysis parameters, the sheet forming operations of original and final die designs were simulated. Excellent agreement between measured and computed thickness strains was obtained and the developed program was able to identify die designs which were rejected during die tryout.

• 한국지역사회생활과학회지
• /
• 제24권4호
• /
• pp.553-565
• /
• 2013

The purpose of this study is to segment urban farming patterns and analyse the preference on urban farming by applying two-step cluster analysis, chi-square analysis and ANOVA. The data was collected by face-to-face surveys on 9 urban farms which were chosen by location and operator. Respondents were asked to describe their urban farming pattern, preference on urban farming and socio-demographic characteristics. Three different clusters were derived from two-step cluster analysis based on operator, transportation, number of visits per month, travel time, area and motive. They were 'hobby-oriented farming', 'producing-oriented farming', and 'multipurpose farming'. The results of chi-square analysis showed that there were significant differences among these three segmented groups in terms of age, with or without children aged under 14, household income per month and housing type. In other words, there is quite a possibility that urbanites have different urban farming patterns according to their socio-demographic profiles. Also, there were significant differences on the preference on urban farming by cluster. According to the results, planning directions of urban farming were presented.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1123-1129
• /
• 2012

This paper presents the fast steady state analysis using time-stepping finite element method for a high power three-phase transformer. The high power transformer spends huge computational cost of the time-stepping finite element method. It is because that the high power transformer requires a lot of time to reach steady state by its large inductance component. In order to reduce computational cost, in this paper, the adaptive time-step control algorithm combined with the embedded 2nd 4th singly diagonally implicit Runge-Kutta method and the analysis strategy using variation of the winding resistance are studied, and their numerical results are compared with those from the typical time-stepping finite element method.

• 한국운동역학회지
• /
• 제27권1호
• /
• pp.75-81
• /
• 2017

Objective: The purpose of this study was to compare and analyze the kinematic variables and electromyography (EMG) findings that change with varying characteristics of crouch start and feedback provision, and to provide the fundamental data for record improvement in 400 mH. Method: Four short-distance runners participated in the experiment. The analyzed variables were elapsed time per interval, stride length, and muscle activities in three lower limb muscles. These variables were analyzed by using Kwon3d XP and Noraxon Myoresearch. The participants were subjected to three conditions, including two conditions that relate to the thrusting foot on the rear block and another condition pertinent to feedback provision. Results: In terms of a one-step interval, the elapsed time in condition A was longer than that in condition B, and the one after the feedback was the longest. The stride length of a one-step interval was the longest in condition A. The stride length of a two-step interval was the shortest in condition A. The muscle activity during a one-step interval showed differences in vastus medialis and medial gastrocnemius, with condition A being the highest. Conclusion: When the non-dominant left foot was located at the back, negative results were observed in terms of elapsed time and stride length. Moreover, an imbalance in muscle activity was observed between the left and right feet when the left foot was placed at the back. As a result, significant differences in elapsed time, stride length, and muscle activity were observed depending on the foot placed on the rear block. In conclusion, we identified the characteristics of crouch start in 400 mH, and a specialized program must be suggested.

• 대한전자공학회논문지
• /
• 제4권4호
• /
• pp.13-18
• /
• 1967

삼각함수형 선형 수동 RC분포회로의 전압전달함수의 모든 극점은 s-평면상에서 부의 실축상에 존재하므로 unit step input에 대한 과도응답은 단조한 특성을 갖는다. 이러한 특성은 집중정수회로에 적용하였던 Elmore의 상승시간 및 지연시간 계산방법을 RC분포회로에도 적용시킬 수 있는 충분한 조건이므로 본 논문에서는 삼각함수형 RC분포회로의 과도응답특성해석을 위의 방법으로 시도하였다. 그 결과 이 회로의 상승시간 및 지연시간은 시정수 및 거리각 θ의 증가와 더불어 이들 시간도 증가함을 확인하였다.

• 한국운동역학회지
• /
• 제17권2호
• /
• pp.23-29
• /
• 2007

The purpose of this study was to examine if there are kinematic variables differences between national representative players (NRP) and non national representative players (NNRP) during 500 m inline skate starting motion. Four NRP and six NNRP were recruited for the study. Each subject executed starting motion five times on a $2{\times}12m$ start way in a gymnasium. Kinematic variables were analyzed by the three-dimensional motion analysis system (60Hz). It was hypothesized that there are difference in elapsed time and center of mass acceleration in starting phase between groups since starting phase has been considered important in sprinting. The results showed that the NRP had significantly shorter starting phase time than that of NNRP. 1) An elapsed time in phase P1 of NRP was shorter than that of NNRP, and excellent players have early started their first stroke. 2) Both NRP and NNRP have started at the same spot, and displacement of the center of gravity in starting posture of NRP group was at the front compared to NNRP group. 3) Average step lengths of NRP were longer than those of NNRP, and a step change of NRP was stabler compared to that of NNRP. 4) In a speed change of the center of gravity NRP showed comparatively high speed from P1 to P4.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.213-216
• /
• 1996

R'||'&'||'D project management is a process of decisions concerned with the achievement of goals of objectives. Especially, defense R'||'&'||'D project planning is the key in the successfull management of defense development. The defense project managers are constantly having to perform "what if\ulcorner" exercise, such as what if the project is extended out for an additional cost\ulcorner In this reserch, we developed a schedule-cost analysis model based upon Critical Path Method(CPM) and Venture Evaluation and Review Technique(VERT) for schedule-cost trade off analysis defense R'||'&'||'D projects. In the first step, a deterministic model is developed as a heuristic which deterministic model is developed as a heuristic which determines the schedule extension and reduction cost as a function desired schedule. In the second step, a stochastic network simulation model is developed to analyse the project risk (sucess and failure). The expected time and cost can be determined for desired schedule under the assumptions of stochastic arc data (time and cost) with a various precedence relationships. This model provides the defense R'||'&'||'D managers with an estimated and expected cost for curtailing or extending a project a given amount of time. The effectiveness and efficiency of the proposed methods, a heuristic and stochastic networks simulations, have been demonstrated through examples.