A loose part monitoring system is used to detect unexpected loose parts in a reactor coolant system in a nuclear power plant. It is still necessary to develop a new methodology for the localization and mass estimation of loose parts owing to the high estimation error of conventional methods. In addition, model-based diagnostics recently emphasized the importance of a model describing the behavior of a mechanical system or component. The purpose of this study is to propose a new localization and mass-estimation method based on finite element analysis (FEA) and optimization technique. First, an FEA model to simulate the propagation behavior of the bending wave generated by a metal sphere impact is validated by performing an impact test and a corresponding FEA and optimization for a downsized steam-generator structure. Second, a novel methodology based on FEA and optimization technique was proposed to estimate the impact location and mass of a loose part at the same time. The usefulness of the methodology was then validated through a series of FEAs and some blind tests. A new feature vector, the cross-correlation function, was also proposed to predict the impact location and mass of a loose part, and its usefulness was then validated. It is expected that the proposed methodology can be utilized in model-based diagnostics for the estimation of impact parameters such as the mass, velocity, and impact location of a loose part. In addition, the FEA-based model can be used to optimize the sensor position to improve the collected data quality in the site of nuclear power plants.
PWM 인버터에서 임의로 선택한 5,7,11차 고조파를 제거할 때, 후리에 급수를 이용하여 비선형 연립방식을 선형 연립방정식으로 바꾸어 점호각을 분석하던 기존의 방법으로부터 새로운 방법을 구현하였다. 후리에 급수를 이용하여 기억소자에 점호각을 look-up 표로 기억시키거나, 또는 점호각 계산 프로그램을 반복 수행하여 점호시각에 트리거하던 기존의 방법으로는 실시간 제어가 곤란하였다. 본 논문에서는 제안된 왈쉬 급수를 이용하여 점호각을 계산하고 하드웨어로 구성하여 입력되는 클럭 주파수만 가변하면, 즉시로 가변된 주파수가 출력되므로 실시간 제어가 가능함을 밝혔다. 또한 Ordered orthogonal 함수를 이용하여 단상회로와 동일한 하드웨어 구성으로 3장 출력이 가능함을 실험을 통하여 확인하였다.
The rapidly advanced industrial society takes advantage of high-technology, but it also suffered from the side effects such as various diseases by contamination. Of these problems, air pollution is considered as the most important problem nowadays. Air contamination is not only limited outdoors, but it also causes more serious effect in our indoor air environment. Depending on the notion that indoor air effects physical health seriously, the needs of the air cleaner is more earnest. Therefore, the main purpose of this study is to develop the air cleaner to meet the standard and get rid of poisonous and harmful material from the atmosphere by using a Corona Discharge. According to the purpose of this study, We set the negative ion generator, the UV, $TiO_{2}$ optical catalyzer, the electrical dust collector and the air filter in series order. It emits a lot of negative ions. We use these ions to purify harmful factors and contaminated materials. We collect the dust using static power that comes from the discharge of corona. At the same time, we try to develop the air cleaner to keep the air quality to meet the standard and kill the various viruses using UV LED and $TiO_{2}$ optical catalyzer. In this study, we use the UV LED that is smaller and efficient than a existing UV lamp. What is more, the UV LED has a features that a stabilizer occupying much space is not needed any more.
Jung, Chang Young;Kim, Tae Gon;Kim, Sung-Eun;Chung, Kyu-Jin;Lee, Jun Ho;Kim, Yong-Ha
Archives of Plastic Surgery
/
제44권1호
/
pp.42-47
/
2017
Background Skin erosion is a dire complication of implantable cardiac pacemakers and defibrillators. Classical treatments involve removal of the entire generator and lead systems, however, these may result in fatal complications. In this study, we present our experience with a simplified salvage technique for exposed implantable cardiac electronic devices (ICEDs) without removing the implanted device, in an attempt to reduce the risks and complication rates associated with this condition. Methods The records of 10 patients who experienced direct ICED exposure between January 2012 and December 2015 were retrospectively reviewed. The following surgical procedure was performed in all patients: removal of skin erosion and capsule, creation of a new pocket at least 1.0-1.5 cm inferior to its original position, migration of the ICED to the new pocket, and insertion of closed-suction drainage. Patients with gross local sepsis or septicemia were excluded from this study. Results Seven patients had cardiac pacemakers and the other 3 had implantable cardiac defibrillators. The time from primary ICED placement to exposure ranged from 0.3 to 151 months (mean, 29 months. Postoperative follow-up in this series ranged from 8 to 31 months (mean follow-up, 22 months). Among the 10 patients, none presented with any signs of overt infection or cutaneous lesions, except 1 patient with hematoma on postoperative day 5. The hematoma was successfully treated by surgical removal and repositioning of the closed-suction drainage. Conclusions Based on our experience, salvage of exposed ICEDs is possible without removing the device in selected patients.
Lee, Gyeongsil;Chang, Jooyoung;Hwang, Seung-sik;Son, Joung Sik;Park, Sang Min
Nutrition Research and Practice
/
제15권1호
/
pp.95-105
/
2021
BACKGROUND/OBJECTIVES: The measurement of body composition, including muscle and fat mass, remains challenging in large epidemiological studies due to time constraint and cost when using accurate modalities. Therefore, this study aimed to develop and validate prediction equations according to sex to measure lean body mass (LBM), appendicular skeletal muscle mass (ASM), and body fat mass (BFM) using anthropometric measurement, serum creatinine level, and lifestyle factors as independent variables and dual-energy X-ray absorptiometry as the reference method. SUBJECTS/METHODS: A sample of the Korean general adult population (men: 7,599; women: 10,009) from the Korean National Health and Nutrition Examination Survey 2008-2011 was included in this study. The participants were divided into the derivation and validation groups via a random number generator (with a ratio of 70:30). The prediction equations were developed using a series of multivariable linear regressions and validated using the Bland-Altman plot and intraclass correlation coefficient (ICC). RESULTS: The initial and practical equations that included age, height, weight, and waist circumference had a different predictive ability for LBM (men: R2 = 0.85, standard error of estimate [SEE] = 2.7 kg; women: R2 = 0.78, SEE = 2.2 kg), ASM (men: R2 = 0.81, SEE = 1.6 kg; women: R2 = 0.71, SEE = 1.2 kg), and BFM (men: R2 = 0.74, SEE = 2.7 kg; women: R2 = 0.83, SEE = 2.2 kg) according to sex. Compared with the first prediction equation, the addition of other factors, including serum creatinine level, physical activity, smoking status, and alcohol use, resulted in an R2 that is higher by 0.01 and SEE that is lower by 0.1. CONCLUSIONS: All equations had low bias, moderate agreement based on the Bland-Altman plot, and high ICC, and this result showed that these equations can be further applied to other epidemiologic studies.
기후 내적 변동성(Climate Internal Variability, CIV)은 기후를 이해하는 데 중요한 역할을 하며 기후예측에 있어 주요 불확실성 원인들 중 하나이다. 본 연구는 다양한 이산화탄소 배출 시나리오에 대해 CIV와 기후학적 평균(Climatological Mean, CM)을 추정하는 것을 목표로 한다. 확률론적 날씨생성기(Stochastic Weather Generator)를 이용하여 국내 40개 기상 관측소에 대해, 30년에 해당하는 시단위 시계열 100개 앙상블을 생성하였다. CIV는 Detrend 방법과 Differenced 방법을 이용하여 추정되었으며, noise 계산값과 비교하였다. 그 결과, CIV 값과 noise 값들 사이의 correlation이 매우 높았으며, 제시된 방법론이 신뢰할 수 있음을 검증하였다. 국내 40개 지역에 적용하여 계산된 CIV와 CM의 주요 결과는 다음과 같다. (1) 국내의 대부분의 지역에 있어 평균적으로 CM과 CIV는 미래에 증가할 것이며, 그 증가 정도는 RCP 8.5의 경우와 먼 미래END(2071-2100년) 기간에서 더 커질 것이다; (2) CM과 CIV의 미래 변화의 특성은 강수의 특성 지수에 따라 다르다. 강수량의 양을 나타내는 3개의 지수(총 강수량, totPr, 일 최대 강수량, maxDa 및 시간당 최대 강수량, maxHr)와 강수량의 발생일수를 나타내는 지수(무강우 일수, nonPr)의 특성은 크게 다르다. (3) CIV와 CM의 변화 요인들 사이의 관계를 조사하면 maxDa와 maxHr에 대해서는 그들 사이에 높은 상관관계가 있지만 다른 지수에는 그렇지 않다. (4) 국내에서 CIV 값이 공간적으로 변동성이 큰 경우는 계절적으로 여름이며, 이는 totPr 및 maxDa에서만 유효하다. 시단위 시계열 앙상블을 생성하여 추정된 기후내적변동성 정보는 기후 변화의 영향을 평가하고 적절한 적응 및 대응 전략을 개발하는 데 도움이 될 것이다.
효율적(效率的)인 농업기계(農業機械)의 실내(室內) 및 실외실험(室外實驗)을 위(爲)하여 Microcomputer에 의(依)한 Data 측정(測定)을 위(爲)해 A/D 변환기(變煥器)를 Interface 시키고, 이를 기록보관(記錄保管)하기 위해 Computer memory인 2716용(用) EPROM programmer와 Microprinter를 interface시켰고, 실험(實驗) 후(後)Data를 다시 HP computer로 전송(傳送)하기 위(爲)한 RS232C 장치(裝置) 등(等)의 Hardware를 구성(構成)하고, 이들의 작동(作動)을 위(爲)한 Microprogram을 개발(開發)하여 Data acquisition system으로 활용(活用)할 수 있는 방안(方案)을 연구(硏究)한 본(本) 연구(硏究)의 주요(主要) 결과(結果)를 요약(要約)하면 다음과 같다. 1. 사용(使用) channel수(數), 측정시간(測定時間) 간격(間隔) 및 측정(測定) data수(數)를 자유(自由)로 조정할 수 있는 측정용(測定用) microprogram을 개발(開發)하였으며 최소(最小) 측정시간(測定時間) 간격(間隔)은 $58.8{\mu}s$이었다. 2. A/D 변환기(變煥器)의 Calibration을 위(爲)해 Function generator에서 삼각파(三角波), 구형파(矩形波), sin파등(波等)을 발생(發生)시켜 Oscillograph에서 확인(確認)하고 이를 계측(計測)하여 보관(保管)한 후(後) HP Computer에 전송(傳送)하여 plotting한 결과(結果) 정확(正確)한 파형(波形)을 얻을 수 있었다. 3. Data 기록(紀錄)을 위(爲)한 EPROM programmer는 잘 동작(動作)하였으며 기록(紀錄) 및 원래(原來)의 Data와 비교(比較)하는 데 총 소요시간(所要時間)은 75초 정도였고, 취급이 용이(容易)할 뿐 아니라 지워서 재사용(再使用)할 수 있어 경제적(經濟的)이었다. 4. Data의 기록(記錄)을 위(爲)한 Microprinter는 그 2kB Decimal로 변환(變換)시켜 Print하는 시간(時間)이 15분(分) 정도이었으며 계측(計測)과 동시(同時)에 기록(記錄)시키는 완속측정용(緩速測定用)으로 적당하였다. 5. 본(本) system과 HP3000 컴퓨터 간(間)의 Data 전송(傳送) 장치(裝置)를 사용(使用)하면 2k byte의 Data를 HP3000 computer로 전송(傳送)하는데 1~2분(分)정도 소요(所要)되었고, 작동(作動)은 만족스러웠다. 6. 사용(使用) 전원(電源)은 DC/DC 변환기(變煥器)를 사용(使用)하여 입력전원(入力電源)이 7~25V로 단일화(單一化)하였으며, 그 상용전류(常用電流)는 1.8A정도로 tractor의 battery를 사용(使用)할 경우도 시동시(始動時)에 전압강하(電壓降下)에 의(依)한 컴퓨터의 오동작(誤動作)이 일어나지 않았으며 야외실험(野外實驗)에서의 적응성(適應性)이 우수하였다. 이상(以上)의 결과(結果)를 종합할 때 본(本) system은 실내(室內) 및 실외(室外) 실험(實驗)을 위(爲)한 Data auquistition system으로 활용(活用)할 수 있으며 경제적면(經濟的面)이나 정말 고속 측정(側定) 면(面)에서 우수한 성능(性能)을 갖춘 것으로 인정(認定)된다.
최대수요전력 예측과 제어의 목적은 공장 또는 빌딩등의 전력수용가의 입장에서 수시로 변동하는 부하의추이를 파악 예측하여 에너지 합리화 경제성 증대 산업기기의 보호 수용가의 비용절감과 더불어 크게는 국가적인 전력시스템안정화를 가져가기 위함에 있다. 최대수요전력 예측/제어를 위한 기존의 방법들은 수용가 특성이나 계절별 요일별 차이를 고려하지 않고 고정된 알고리즘에 의해 예측값이 결정되므로 환경변화에 적극적인 대응능력이 부족한 단점이있다. 이와같은 문제점의 해결을 위해 본 논문에서는 현재 많은 연구가 되고 있는 SOFM 신경망을 이용한 예측 방법과 예측치의 보정방법으로 퍼지제어길르 추가한 형태의 최대수요전력예측 제어기를 제안한다, 예측방법의 경우 유동적이며 적은 구간을 통하여 순시부하처럼 변동이 많은 데이터에 대하여 예측시간을 단축함과 동시에 오차를 줄여나갈수 있다. 또한 2단계의 학습을 통하여 SOFMd의 출력값이 패턴이 아닌 예측치가 될 수 있도록 변형하였으며 패턴자체의 변화에 대응하여 패턴오차를 이용하여재학습을 하도록 하여 불안정한 전력에 대하여 보완한다. 그리고 예측후반부에 퍼지제어기를 연결하여 예측의 신뢰성을 높이는 안정된 예측구조를 가지고 있다. 실험결과 시계열 예측방법인 지수평활법보다 제안된 예측/제어 방법이 우수함을 확인하였다.
최근 계측 기술의 발전으로 압력계와 유량계 등 다양한 센서를 설치하여 상수도관망의 상태를 효과적으로 파악할 수 있게 되었으나, 도시가 광범위하게 개발됨에 따라 계측 신뢰도에 영향을 미치는 변수는 다양해지고 있다. 특히 상수도관망 분석에 중요한 영향력을 가지는 수요 데이터의 경우 직접 계측의 난이도가 높고 결측이 발생하기 쉬운 것으로 알려져 데이터 생성의 중요도가 증가하고 있다. 본 논문에서는 상수도관망에서 누락된 데이터를 정확하게 생성하기 위해 생성적 딥러닝 모델에 기반한 적대적 학습 기반 오토인코더(ATAE) 모델을 제안한다. 제안된 모델은 판별 신경망과 생성 신경망의 두 가지 신경망의 적대적 학습을 사용하여 압력 데이터로부터 수요 데이터를 생성한다. 학습이 완료된 ATAE 모델의 생성 신경망은 관망의 계측되는 압력 데이터가 존재하는 경우, 그로부터 추정된 관망 수요 데이터를 제공할 수 있다. ATAE 모델은 미국 텍사스주 오스틴의 실제 상수도망에 적용되어 성능이 검증되었다. 수요 및 압력 시계열 데이터의 불확실성 정도에 따른 ATAE 예측 결과의 정확도를 비교하여 데이터 불확실성의 영향을 분석하였으며, 또한 수요 수준에 따른 데이터 수집 기간별 생성 결과를 비교하여 이에 따른 데이터 생성 성능을 검토하였다.
Mukin, Roman;Clifford, Ivor;Zerkak, Omar;Ferroukhi, Hakim
Nuclear Engineering and Technology
/
제50권3호
/
pp.356-367
/
2018
A series of tests dedicated to station blackout (SBO) accident scenarios have been recently performed at the $Prim{\ddot{a}}rkreislauf-Versuchsanlage$ (primary coolant loop test facility; PKL) facility in the framework of the OECD/NEA PKL-3 project. These investigations address current safety issues related to beyond design basis accident transients with significant core heat up. This work presents a detailed analysis using the best estimate thermal-hydraulic code TRACE (v5.0 Patch4) of different SBO scenarios conducted at the PKL facility; failures of high- and low-pressure safety injection systems together with steam generator (SG) feedwater supply are considered, thus calling for adequate accident management actions and timely implementation of alternative emergency cooling procedures to prevent core meltdown. The presented analysis evaluates the capability of the applied TRACE model of the PKL facility to correctly capture the sequences of events in the different SBO scenarios, namely the SBO tests H2.1, H2.2 run 1 and H2.2 run 2, including symmetric or asymmetric secondary side depressurization, primary side depressurization, accumulator (ACC) injection in the cold legs and secondary side feeding with mobile pump and/or primary side emergency core coolant injection from the fuel pool cooling pump. This study is focused specifically on the prediction of the core exit temperature, which drives the execution of the most relevant accident management actions. This work presents, in particular, the key improvements made to the TRACE model that helped to improve the code predictions, including the modeling of dynamical heat losses, the nodalization of SGs' heat exchanger tubes and the ACCs. Another relevant aspect of this work is to evaluate how well the model simulations of the three different scenarios qualitatively and quantitatively capture the trends and results exhibited by the actual experiments. For instance, how the number of SGs considered for secondary side depressurization affects the heat transfer from primary side; how the discharge capacity of the pressurizer relief valve affects the dynamics of the transient; how ACC initial pressure and nitrogen release affect the grace time between ACC injection and subsequent core heat up; and how well the alternative feeding modes of the secondary and/or primary side with mobile injection pumps affect core quenching and ensure stable long-term core cooling under controlled boiling conditions.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.