• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.3
• /
• pp.261-270
• /
• 2010

This paper presents an analytical investigation for a baseline-free imaging of a defect in plate-like structures using the time-reversal of Lamb waves. We first consider the flexural wave (A0 mode) propagation in a plate containing a defect, and reception and time reversal process of the output signal at the receiver. The received output signal is then composed of two parts: a directly propagated wave and a scattered wave from the defect. The time reversal of these waves recovers the original input signal, and produces two additional side bands that contain the time-of-flight information on the defect location. One of the side band signals is then extracted as a pure defect signal. A defect localization image is then constructed from a beamforming technique based on the time-frequency analysis of the side band signal for each transducer pair in a network of sensors. The simulation results show that the proposed scheme enables the accurate, baseline-free detection of a defect, so that experimental studies are needed to verify the proposed method and to be applied to real structure.

• Proceedings of the KOSOMBE Conference
• /
• v.1989 no.05
• /
• pp.51-54
• /
• 1989

In last several years, a number of volume localization techniques, such as ISIS, VSE, SPARS and STEAM etc., have been developed for the MR spectroscopy. These localizing techniques, however, require application of several RF pulses for the 3-D volume selection and suffer from T1 and T2 decays due to relatively long RF excitation time. In this paper, we propose a single-shot RF pulse localization technique to achieve the localized 3-D volume selection. This technique combines the cylindrical volume selection technique with a radial gradient coil with single-shot RF pulse and the oscillating selection gradient technique, so thai it minimizes the volume selection time. We report some experimental results obtained with the proposed method which appears promising for 3-D volume imaging and localized spectroscopy.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1790-1791
• /
• 2011

In this paper, the diagnosis system for detecting and localizing the neutral wire defect in an energized XLPE power cable is proposed. The neutral wire defect is detectd and localized by the time-frequency domain reflectometry. To extract the reflected signal from the neutral wire defect, the adaptive RLS filtering is introduced. To verify the proposed method, the experiments for detecting and localizing neutral wire defect in active XLPE power cable is conducted.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1782_1783
• /
• 2009

Reflectometry that has been used to localize faults on a cable is introduced. One of the key point of reflectometry is finding time delay between the incident and reflected signals. In this paper, we propose new reflectometry that use Gaussian enveloped linear chirp signal, and use Kalman filter to estimate frequency rate parameter of the chirp signal. From the estimated frequency rate parameter, we can measure the time delay. In a simulation assuming open ended cable, the proposed method is proved to give a good estimation results.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.252-260
• /
• 2021

In this paper, a method of using Software Defined Radio (SDR) is proposed for improving the accuracy of identifying two kinds of signals as Wireless Fidelity (Wi-Fi) signal and Bluetooth signal at the same frequency band of 2.4 GHz based on the time-domain signal characteristic. An SDR device was set up for collecting transmitting signals from Wi-Fi access points (Wi-Fi) and mobile phones (Bluetooth). Different characteristics between Wi-Fi and Bluetooth signals were extracted from the measured result. The SDR device is programmed with a Wi-Fi and Bluetooth detection algorithm and a collision detection algorithm to detect and verify the Wi-Fi and Bluetooth signals based on collected IQ data. These methods are necessary for some applications like wireless communication optimization, Wi-Fi fingerprint localization, which helps to avoid interference and collision between two kinds of signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.285-297
• /
• 2015

In this paper, Ulta-WideBand (UWB) channel measurement and modeling based on compressive sampling (CS) are proposed. The sparsity of the channel impulse response (CIR) of the UWB signal in frequency domain enables the proposed channel measurement to have a low-complexity and to provide a comparable performance compared with the existing approaches especially used for the indoor geo-localization purpose. Furthermore, to improve the performance under noisy situation, the soft thresholding method is also investigated in solving the optimization problem for signal recovery of CS. Via numerical results, the proposed channel measurement and modeling are evaluated with the real measured data in terms of location estimation error, bandwidth, and compression ratio for indoor geo-localization using UWB system.

• Journal of KIISE:Software and Applications
• /
• v.37 no.1
• /
• pp.74-79
• /
• 2010

The amino acid composition of a protein provides basic information for solving many problems in bioinformatics. We propose a new method that uses biologically relevant similarity between amino acids to determine the amino acid composition, where the BOLOSUM matrix is exploited to define a similarity measure between amino acids. Futhermore, to extract more information from a protein sequence than conventional methods for determining amino acid composition, we exploit the concepts of spectral analysis of signals such as radar and speech signals-the concepts of time-dependent analysis, time resolution, and frequency resolution. The proposed method was applied to predict subcellular localization of proteins, and showed significantly improved performance over previous methods for amino acid composition estimation.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.411-418
• /
• 2016

In this paper, we developed a new method estimating the location of ballistic missile launching using infrasound signals. Infrasound signal generated from the North Korea's ballistic missile launch was used as source data and its signal was recorded at KMA (Korea Meteorological Administration) infrasound stations located at Cheorwon and Yanggu. Time-frequency analysis, TDOA (Time Delay of Arrival) method and spherical trigonometry were applied for data processing of signal recorded and occurrence location detection. We could confirm the outstanding performance of the algorithm estimating source location which was only 3 km apart from the actual launching site.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.1
• /
• pp.195-199
• /
• 2009

Augmented reality is a field of computer research which deals with the combination of real-world and computer-generated data, where computer graphics objects are blended into real footage in real time and it has tremendous potential in visualizing geospatial information. However, to utilize augmented reality in mobile system, many researches have undergone with GPS or marker based approaches. Localization and tracking of current position become more complex problem when it is used in indoor environments. Many proposed RF based tracking and localization. However, it does cause deployment problems of large sensors and readers. In this paper, we present a noble markerless AR approach for indoor navigation system only using a camera. We will apply this work to mobile seamless indoor/outdoor u-GIS system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.837-842
• /
• 2004

The positions of rotating sound sources have been localized by experiments with the Doppler effects removed. In order to do-Dopplerize the sound signals emitted from moving sources, two kinds of signal reconstruction methods were applied. One is the forward propagation method and the other is the backward propagation method. Forward propagation method analyze the source emission time based on the instantaneous distance between sensors and the assumed source position, then the signals are reconstructed with respect to the emission time. On the other hand, the backward method uses time delay to do-Dopplerize the acquired data for the received time of reference. In both techniques, the reconstructed signal data were processed using beamforming algorithm to produce power distributions at the frequency of interest. Experiments have been carried out for varying frequencies, rotating speeds and the object distances. Forward propagation method has shown better performance in locating source position than the backward propagation method.