• The Journal of the Acoustical Society of Korea
• /
• 제17권4E호
• /
• pp.41-47
• /
• 1998

Microphone is the first link in the speech recognition system. Depending on its type and mounting position, the microphone can significantly distort the spectrum and affect the performance of the speech recognition system. In this paper, characteristics of the speech signal for different microphones and microphone distances are investigated both in time and frequency domains. In the time domain analysis, the average signal-to-noise ration is measure ration is measured for the database we collected depending on the microphones and microphone distances. Mel-frequency spectral coefficients and mel-frequency cepstrum are computed to examine the spectral characteristics. Analysis results are discussed with our findings, and the result of recognition experiments is given.

• 한국추진공학회지
• /
• 제8권4호
• /
• pp.91-101
• /
• 2004

분사기와 연소실만을 가지는 연소기의 수학적 선형모델을 가지고, 액체추진제 로켓엔진 연소기에 대한 저주파 동특성 분석을 수행하였다. 연소실의 압력변화가 추진제 유량변화로 되먹임되는 구조를 가짐에 따라 저주파 섭동을 나타냈으며. 연소실의 시정수가 증가할수록, 분사기의 차압이 증가할수록, 연소시간지연이 짧을수록 시스템은 안정하였다. 분사기 시정수 변화가 안정성에 미치는 영향은 크지 않았다. 연소시간지연이 없는 경우의 시스템은 항상 안정하였으며, 지연시간이 증가할수록 섭동 주파수 및 감쇠율은 줄어들며, 결국 시스템은 불안정하게 되었다.

• 한국실내디자인학회논문집
• /
• 제22권6호
• /
• pp.108-118
• /
• 2013

This study has analyzed the process of space information perceived and recognized through the estimation of observation frequency and number according to the time range of observation data acquired from observation experiment with the object of hospital lobby. The followings are the results analyzed at this study. First, the continual observation of 3 and 6 times was attentive and conscious for probing to find an object rather than for acquiring exact information and that of 9 times could be regarded as the time for acquiring visual appreciation. However, the repetitive occurrence of high and low frequencies can be thought of repetitive acts for visual appreciation. Second, the continual observation of 3 and 6 times had the highest observation frequency of II, while that of 9 times had the highest observation frequency of III. In case of 3 and 6 times, the observation frequency had the tendency to become a little higher after being low since V, and in case of 9 times it had the repetition of becoming low and high and from IX it characteristically got higher. This feature can be thought to be the process that the subject repeats the fixation and movement of observation at a visual activity for perception and recognition. In the process of first observation, the observation frequency was the highest after 20 seconds or so, but since then, it gets lower and repeatedly gets higher and lower as time passes. After 90 seconds, the frequency showed the tendency of getting higher continuously. Third, the examination of changing features of frequency may show the characteristics of exploration for and attention to space but if the observation frequency is not associated with observation times for analysis there will a limitation that the features of observation frequency cannot be clarified. Accordingly, the simultaneous analysis of both is very effective for estimating the observation characteristics seen at the processes of perception and recognition. Fourth, the general analysis of the both revealed: with the progress of observation time the discontinuous space exploration decreased, and as the observation time got longer the fixed attention to a specific spot increased. Fifth, in order to estimate the observation characteristics by the change of time range the observation frequency and times by trend line was analyzed, which approach seems to be an appropriate technique that can comprehensively show the overall flow of time series data.

• 비파괴검사학회지
• /
• 제21권1호
• /
• pp.39-45
• /
• 2001

신호처리법으로 현재 많이 사용되고 있는 푸리에 변환은 신호의 주파수 성분이 시간에 따라 어떻게 변화하는지를 표현하지 못한다. 따라서 최근 이와 같은 푸리에 변환의 단점을 보완하여, 신호의 시간과 주파수에 대한 정보를 동시에 표현할 수 있는 시간-주파수 해석법들이 개발되었다. 본 연구에서는 음향방출을 이용하여 복합재료의 주요 발생원으로 알려져 있는 기지균열, 섬유분리, 섬유파괴 덴 층간분리 등과 같은 파괴기구를 해석하였다. 각각의 파괴특성이 나타나도록 시험편을 제작하여 인장시험 시 검출된 음향방출신호의 시간-주파수 해석을 통해 전체 파괴기구의 특징을 분석하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.978-981
• /
• 1999

In this paper, an improved integer-N frequency synthesizer that can be synthesized into smaller channel space than input signal frequency is presented. The proposed frequency synthesizer also has an characteristics of fast phase locking time. The frequency synthesizer performed in the manner that it divides various outputs of different phases in VCO by means of dividers that have different control signals respectively and then add the divided signal. In order to confirm the characteristics of proposed frequency synthesizer, behavioral and SPICE simulations are performed using C-language and HSPICE respectively.

• 한국진공학회지
• /
• 제3권1호
• /
• pp.71-76
• /
• 1994

The electrical characteristics of the capacitor dielectric films of amorphous silicon-nit-ride-oxide(ANO) structures are compared with the capacitor dielectric films of oxide-nitride-oxide (ONO) structrues The electrical characteristics of ONO and ANO films were evaluated by high frequency(1 MHz) C-V high frequency C-V after constant voltage stree I-V TDDB and refresh time measurements. ANO films shows good electrical characteristics such as higher total charge to breakdown storage capacitance and longer refresh time than ONO films. Also it makes little difference that leakage current and flat band voltage shyift(ΔVfb)of ANO ana ONO films.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1571-1577
• /
• 2013

Electrical tree structure is one of the most important influencing factors for electrical treeing characteristics in polymers. In this paper, we focused on the structure characteristics of electrical treeing in epoxy resins (original) insulation under different high-frequency voltages (60, 500, 1000Hz). Effects of voltage frequency on the ac electrical treeing phenomena in an epoxy resins were carried out in needle-plate electrode arrangement. To measure the treeing initiation and propagation, and the breakdown rate, constant AC of 10 kV with three different voltage frequencies (60, 500 and 1,000 Hz) was applied to the specimen in needle-plate electrode specimen at $30^{\circ}C$ of insulating oil bath. At 60 Hz, the treeing initiation time was 360 min and the propagation rate was $6.85{\times}10^{-4}mm/min$, and the morphology was dense branch type. As the voltage frequency increased, the treeing initiation time decreased and the propagation rate increased. At 1,000 Hz, the treeing initiation time was 0 min and the propagation rate was $7.81{\times}10^{-2}mm/min$, and the morphology was dense bush type.

• Earthquakes and Structures
• /
• 제3권6호
• /
• pp.839-852
• /
• 2012

Earthquake records are often analyzed in various earthquake engineering problems, making time-frequency analysis for such records of primary concern. The best tool for such analysis appears to be based on wavelet functions; selection of which is not an easy task and is commonly carried through trial and error process. Furthermore, often a particular wavelet is adopted for analysis of various earthquakes irrespective of record's prime characteristics, e.g. wave's magnitude. A wavelet constructed based on records' characteristics may yield a more accurate solution and more efficient solution procedure in time-frequency analysis. In this study, a low-pass reconstruction filter is obtained for each earthquake record based on multi-resolution decomposition technique; the filter is then assigned to be the normalized version of the last approximation component with respect to its magnitude. The scaling and wavelet functions are computed using two-scale relations. The calculated wavelets are highly efficient in decomposing the original records as compared to other commonly used wavelets such as Daubechies2 wavelet. The method is further advantageous since it enables one to decompose the original record in such a way that a clear time-frequency resolution is obtained.

• Journal of Power Electronics
• /
• 제8권1호
• /
• pp.91-100
• /
• 2008

The d-q harmonic detecting algorithms are dominant methods to generate current references for active power filters (APF). They are often implemented in the synchronous frame and time domain. This paper researches the frequency characteristics of d-q synchronous transformations, which are closely related to the analysis and design issues of control system. Intuitively, the synchronous transformation is explained with amplitude modulation (AM) in this paper. Then, the synchronous filter is proven to be a time-invariant and linear system, and its transfer function matrix is derived in the stationary frames. These frequency-domain models imply that the synchronous transformation has an equivalent effect of frequency transformation. It is because of this feature, the d-q method achieves band-pass characteristics with the low pass filters in the synchronous frame at run time. To simplify these analytical models, an instantaneous positive-negative sequence frame is proposed as expansion of traditional symmetrical components theory. Furthermore, the synchronous filter is compared with the traditional bind-pass filters based on these frequency-domain analytical models. The d-q harmonic detection methods are also improved to eliminate the inherent coupling effect of synchronous transformation. Typical examples are given to verify previous analysis and comparison. Simulation and experimental results are also provided for verification.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.168-174
• /
• 2009

An application of wavelet analysis to power system transient generated signals is presented in this paper. With the time-frequency localisation characteristics embedded in wavelets, the time and frequency information of a waveform can be presented as a visualised scheme. This feature is very important for non-stationary signals analysis such as the ones generated from power system disturbances. Unlike the Fourier transform, the wavelet transform approach is more efficient in monitoring fault signals as time varies. For time intervals where the function changes rapidly, this method can zoom in on the area of interest for better visualisation of signal characteristics.