• Title/Summary/Keyword: time-domain methods

Search Result 870, Processing Time 0.033 seconds

A Study on Fatigue Analysis of Non-Gaussian Wide Band Process using Frequency-domain Method (주파수 영역 해석 기법을 이용한 비정규 광대역 과정의 피로해석에 관한 연구)

  • Kim, Hyeon-Jin;Jang, Beom-Seon
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.55 no.6
    • /
    • pp.466-473
    • /
    • 2018
  • Most frequency domain-based approaches assume that structural response should be a Gaussian random process. But a lot of non-Gaussian processes caused by multi-excitation and non-linearity in structural responses or load itself are observed in many real engineering problems. In this study, the effect of non-Normality on fatigue damages are discussed through case study. The accuracy of four frequency domain methods for non-Gaussian processes are compared in the case study. Power-law and Hermite models which are derived for non-Gaussian narrow-banded process tend to estimate fatigue damages less accurate than time domain results in small kurtosis and in case of large kurtosis they give conservative results. Weibull model seems to give conservative results in all environmental conditions considered. Among the four methods, Benascuitti-Tovo model for non-Gaussian process gives the best results in case study. This study could serve as background material for understanding the effect of non-normality on fatigue damages.

Estimation of Longitudinal Vibration Using Transverse Vibration of a String Subject to Parametric Oscillation (매개변수가진에 종속되는 현의 횡방향 진동을 이용한 종방향 진도의 추정)

  • 김도균;김광준
    • Journal of KSNVE
    • /
    • v.4 no.3
    • /
    • pp.365-375
    • /
    • 1994
  • Periodic longitudinal vibrations of a video and audio tape and the like used for transducing pictures and sounds may be induced by self-excited vibrations which are caused by frictions against the heads and guides, and their eccentricity, noncircularity or irregularity. It is important to analyze the longitudinal vibration of a tape because it causes distortions of a reproduced signal. It is difficult to measure directly the longitudinal vibration. In this paper a method estimating longitudinal vibration using impulse responses in the transverse direction is presented. And, the parameters boundary domain where the transverse and longitudinal vibration can be decoupled is introduced. In the domain where the both vibrations are decoupled, analytic methods using frequency characteristics and transient responses of the transverse vibration, respectively, are presented. The time domain method predicted more exactly the instantaneous phase of the longitudinal vibration than frequency domain method did.

  • PDF

Computation of dilute polymer solution flows using BCF-RBFN based method and domain decomposition technique

  • Tran, Canh-Dung;Phillips, David G.;Tran-Cong, Thanh
    • Korea-Australia Rheology Journal
    • /
    • v.21 no.1
    • /
    • pp.1-12
    • /
    • 2009
  • This paper reports the suitability of a domain decomposition technique for the hybrid simulation of dilute polymer solution flows using Eulerian Brownian dynamics and Radial Basis Function Networks (RBFN) based methods. The Brownian Configuration Fields (BCF) and RBFN method incorporates the features of the BCF scheme (which render both closed form constitutive equations and a particle tracking process unnecessary) and a mesh-less method (which eliminates element-based discretisation of domains). However, when dealing with large scale problems, there appear several difficulties: the high computational time associated with the Stochastic Simulation Technique (SST), and the ill-condition of the system matrix associated with the RBFN. One way to overcome these disadvantages is to use parallel domain decomposition (DD) techniques. This approach makes the BCF-RBFN method more suitable for large scale problems.

ADVANCED DOMAIN DECOMPOSITION METHOD BY LOCAL AND MIXED LAGRANGE MULTIPLIERS

  • Kwak, Junyoung;Chun, Taeyoung;Cho, Haeseong;Shin, Sangjoon;Bauchau, Olivier A.
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • v.18 no.1
    • /
    • pp.17-26
    • /
    • 2014
  • This paper presents development of an improved domain decomposition method for large scale structural problem that aims to provide high computational efficiency. In the previous researches, we developed the domain decomposition algorithm based on augmented Lagrangian formulation and proved numerical efficiency under both serial and parallel computing environment. In this paper, new computational analysis by the proposed domain decomposition method is performed. For this purpose, reduction in computational time achieved by the proposed algorithm is compared with that obtained by the dual-primal FETI method under serial computing condition. It is found that the proposed methods significantly accelerate the computational speed for a linear structural problem.

Blind Watermarking Algorithms: A Tutorial (블라인드 워터마킹: 튜토리얼)

  • 김형중;여인권
    • Journal of Broadcast Engineering
    • /
    • v.6 no.3
    • /
    • pp.270-282
    • /
    • 2001
  • This paper Introduces three well-known blind watermarking algorithms in terms of signal processing aspects. Those three methods include correlation-based, echo-hiding, and patchwork algorithms. Those algorithms can be applied either in time-domain (or equivalently spatial-domain) or frequency-domain (or equivalently transform-domain). This paper describes watermark embedding and detection algorithms as well as basic ideas for those watermarking algorithms. In addition, we include some experimental results.

  • PDF

Evaluation of methods for estimating the pulse reflection site with cardiovascular simulator (심혈관계 시뮬레이터를 이용한 맥파 반사지점 추정방법들의 비교)

  • Lee, Ju-Yeon;Shin, Sang-Hoon
    • The Journal of the Society of Korean Medicine Diagnostics
    • /
    • v.19 no.1
    • /
    • pp.47-54
    • /
    • 2015
  • Objective Wave reflection is an important factor that determines the shape of the pulse wave. The purpose of this study is to compare the conventional method used for estimating the reflection site of pulse with a cardiovascular simulator. Methods: In this study, cardiovascular simulator with one elastic tube was used. The pressure and flow was measured simultaneously at three different points. The measured data were used to the conventional methods to estimate the pulse wave reflection site. The results were compared with the known length which were the distances from the measured points to the end of tube. Results & Conclusions: There is a significant error with the time domain method. While, the reflection site with the frequency domain method was similar to the actual reflection site.

Advanced electromagnetic wave-based method for characterizing defects in cement-based structures using time domain reflectometry

  • Dongsoo Lee;Jong-Sub Lee;Young K. Ju;Yong-Hoon Byun
    • Computers and Concrete
    • /
    • v.33 no.5
    • /
    • pp.621-630
    • /
    • 2024
  • This study presents novel electromagnetic wave-based methods for evaluating the integrity of cement-based structures using time domain reflectometry (TDR). Two cement-based plates with embedded rebars are prepared under sound and defective conditions. TDR tests are carried out using transmission lines with various numbers of artificial joints, and electromagnetic waves are measured to assess the integrity of the plates. The experimental results show that the travel time of electromagnetic waves is consistently longer in sound plates than in defective ones, and an increase in the reflection coefficients is observed in the defect zone of the defective plates. Electromagnetic wave velocities are higher in the defective plates, especially when connectors are present in the transmission line. A novel approach based on the area of the reflection coefficient provides larger areas in the defective plates, and the attenuation effect of the electromagnetic waves induces a difference in the areas of the reflection coefficient between the two defect conditions. An alternative method using the centroid of the defect zone slightly overestimates the location of the defect zone. The length of the defect zone is estimated using the defect ratio and wave velocities of cement, air, and plate. The length of the defect zone can also be calculated using the travel times within the plate, total measured length of the plate, and wave velocities in the cement and air. Therefore, the electromagnetic wave-based methods proposed in this study may be useful for estimating the location and length of defect zones by considering attenuation effects.

Wavelet-Galerkin Scheme of Inhomogeneous Electromagnetic Problems in the time Domain

  • 정영욱;이용민;최진일;나극환;강준길;신철재
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.10 no.4
    • /
    • pp.550-563
    • /
    • 1999
  • A wavelet-Galerkin scheme based on the time-dependent Maxwell's equations is presented. Daubechies wavelet with two vanishing wavelet moments is expanded for basis function in spatial domain and Yee's leap-frog approach is applied. The shifted interpolation property of Daubechies wavelet family leads to the simplified formulations for inhomogeneous media without the additional matrices for the integral or material operator. The stability condition is formulated. The dispersion characteristics are analyzed and compared with those of finite difference time domain and multiresolution time domain methods. The analyses show the excellent trade-off between the regularity and the support width of the basis function. Although the basis function has only two vanishing wavelet moments, it is enough to provide negligible dispersive error in the numerical analysis and its compact support enables only several involved terms per nodes. The storage effectiveness, execution time reduction and accuracy of this scheme are demonstrated by calculating the resonant frequencies of the homogeneous and inhomogeneous cavities.

  • PDF

Addition of Myofascial Release Therapy to Therapeutic Exercise for Management of Nonspecific Neck Pain

  • Ha, Yangsun;Hahm, Suk-Chan
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.9 no.2
    • /
    • pp.35-41
    • /
    • 2021
  • Purpose : It is necessary to demonstrate the effect of non-invasive and non-pharmacological interventions such as manual therapy and therapeutic exercise for the management of nonspecific neck pain. In the present study, we aimed to investigate the efficacy of myofascial release therapy plus therapeutic exercise for disability owing to neck pain and quality of life in individuals with nonspecific neck pain. Methods : Eighteen participants with nonspecific neck pain were randomly allocated to intervention (n=9) and control groups (n=9). The intervention group received a myofascial release therapy for 20 min and performed neck stabilization exercises for 30 min twice a week for 4 weeks. The control group performed neck stabilization exercises for 30 min twice a week for 4 weeks at the same time points as the intervention group. Disability owing to neck pain and quality of life were quantified using the neck disability index (NDI) and the Korean version of the World Health Organization Quality of Life Brief Version (WHOQOL-BREF), respectively. NDI and WHOQOL-BREF were assessed before and after intervention. Results : The disability owing to neck pain significantly changed between the groups over time (total score of NDI, p=.049). There were significant time and group interactions in pain (pain intensity of NDI, p=.035) and concentration (concentration of NDI, p=.049). Personal care, lifting, reading, headaches, work, driving, sleeping, and recreation did not show significant improvement between the groups over time. Total score, overall quality of life and general health, physical health domain, psychological domain, social relationships domain, and environmental domain quantified by WHOQOL-BREF did not show significant improvements between the groups over time. Conclusion : These results suggest the clinical use of myofascial release therapy in addition to therapeutic exercise for the management of nonspecific neck pain. Further studies are needed to generalize the findings of this study.

Gain Tuning of PID Controllers with the Dynamic Encoding Algorithm for Searches(DEAS) Based on the Constrained Optimization Technique

  • Kim, Jong-Wook;Kim, Sang-Woo
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2003.10a
    • /
    • pp.13-18
    • /
    • 2003
  • This paper proposes a design method of PID controllers in the framework of a constrained optimization problem. Owing to the popularity for the controller's simplicity and robustness, a great deal of literature concerning PID control design has been published, which can be classified into frequency-based and time-based approaches. However, both approaches have to be considered together for a designed PID control to work well with a guaranteed closed-loop stability. For this purpose, a penalty function is formulated to satisfy both frequency- and time-domain specifications, and is minimized by a recet nonlinear optimization algorithm to attain optimal PID control gains. The proposed method is compared with Wang's and Ho's methods on a suite of example systems. Simulation results show that the PID control tuned by the proposed method improves time-domain performance without deteriorating closed-loop stability.

  • PDF