• Geomechanics and Engineering
• /
• 제10권4호
• /
• pp.423-436
• /
• 2016

Currently, there is a great interest in the coupling between multiphase fluid flow and geomechanical effects in hydrocarbon reservoirs and surrounding rocks. The ideal solution for this coupled problem is to introduce the geomechanical effects through the stress analysis solution and implement an algorithm, which assures that the equations governing the flow and stress analyses are obeyed in each time step. This paper deals with the implementation of a program (FORTRAN90 interface code), which was developed to couple conventional reservoir (ECLIPSE) and geomechanical (ABAQUS) simulators, using a partial coupling algorithm. The explicit coupled hydro-mechanical behavior of Iranian field during depletion and $CO_2$ injection is studied using the soils consolidation procedure available in ABAQUS. Time dependent reservoir pressure fields obtained from three dimensional compositional reservoir models were transferred into finite element reservoir geomechanical models in ABAQUS as multi-phase flow in deforming reservoirs cannot be performed within ABAQUS. The FEM analysis of the reservoir showed no sign of plastic strain under production and $CO_2$ injection scenarios in any part of the reservoir and the stress paths do not show a critical behavior.

• Journal of Mechanical Science and Technology
• /
• 제14권2호
• /
• pp.152-158
• /
• 2000

The contents of this paper include the evaluation of corrosion characteristics and the behaviour of stress corrosion cracking (SCC) for the weldment and post weld heat treatment (PWHT) specimen and parent of HT -60 steel using a slow strain rate test (SSRT) in synthetic seawater. Corrosion characteristics were obtained from the polarization curves by potentiostat, and SCC phenomena were evaluated through the parameters such as reduction of area and time to failure by comparing the experimental results in corrosive environment with those obtained in air. Corrosion rate of the weldment was the fastest, followed by parent and PWHT specimen. SCC phenomena between the weldment of HT-60 steel and synthetic seawater were shown. Besides, SCC was dependent upon the pulling speed greatly. Maximum severity of SCC was obtained at a speed of $10^{-6}mm/min$, whereas SCC could not be seen almost at $10^{-4}mm/min$. The resistance to SCC for PWHT specimen was improved considerably compared that of the weldment at $10^{-6}mm/min$. In case of SCC failure, it was verified from SEM examination that brittle mode and lots of pits could be seen at the fractured region near the surface of the specimen.

• 지질공학
• /
• 제9권2호
• /
• pp.135-145
• /
• 1999

동적 하중을 받는 지반반응 평가시 필요한 가장 중요한 변수 중에 하나가 지반의 전단탄성계수(G)이다. 지반의 동특성은 시간에 따라 변화하게 되는데, 이 점은 흔히 간과되어져 왔다. 이번 연구를 통하여 일정구속압에서 시간에 따라 변하는 토질 최대전단탄성계수($G_{max}$) 및 그 영향요소에 관해 고찰해보고 몇몇 경험식을 제안하고자 한다. 경험식 작성을 위해 고려된 요소는 선행응력과 선행변형율, 입자크기와 지속응력, 소성지수 등이고, 실제로 가장 큰 영향을 미치는 평균입자직경과 소성지수를 이용한 두개의 경험식을 작성하였다. 끝으로 $G_{max}$의 일시적 변화와 그 원인, 그리고 시간에 따라 증가하는 G가 시사하는 점에 대해 서술한다

• Steel and Composite Structures
• /
• 제27권2호
• /
• pp.185-192
• /
• 2018

Fly ash can significantly improve concrete workability and performance, and recycling fly ash in concrete can contribute to a cleaner environment. Since fly ash influences pozzolanic reactions in concrete, mechanical behaviors of concrete containing fly ash differ from traditional concrete. Creep behaviors of fly ash concrete filled steel tube arch were experimentally investigated for 10% and 30% fly ash replacement. The axes of two arches are designed as circular arc with 2.1 m computed span, 0.24 m arch rise, and their cross-sections are all in circular section. Time dependent deflection and strain of loading and mid-span steel tube were measured, and long term deflection of the model arch with 10% fly ash replacement was significantly larger than with 30% replacement. Considering the steel tube strain, compressive zone height, cross section curvature, and internal force borne by the steel tube, the compressive zone height and structural internal forces increased gradually over time due to concrete creep. Increased fly ash content resulted in more significant neutral axis shift. Mechanisms for internal force effects on neutral axis height were analyzed and verified experimentally.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.190-200
• /
• 1991

본 연구에서는 고온에 노출되는 열-점소성 거동의 해석을 위해 소성유동, 크 리프, 응력풀림(stress relaxation)등의 거동을 동시에 다룰 수 있는 통일구성방정식 모델에 대해 논하고 적절한 모델을 선정한다. 이 모델은 미소변형이론에 근거한 것 이므로 구조물의 거동을 소변형률(small strain)과 소회전(small rotation)의 범위내 로 가정하여 해석한다.선정된 모델에 대해서 시간변화율 형태의 방정식으로부터 유 한요소법을 통한 수치화와 사용된 구성방정식을 효율적으로 처리할 수 있는 수치해석 법상의 알고리듬을 제안한다. 제안된 알고리즘을 사용하여 유한요소법 전산코드를 적상하고, 작성된 코드를 이용하여 고온에서 하중을 받는 단순보와 국부적으로 심한 가열을 받는 구조물에 적용하여 고전적인 구성방정식으로 복합적인 해석이 어려웠던 열-점소성 거동을 효과적으로 해석할 수 있음을 보인다. 본 논문은 응력해석에 주안 점을 두었으므로 열해석에 관한 상세한 논의는 가급적 생략하기로 한다.

• Geomechanics and Engineering
• /
• 제8권5호
• /
• pp.707-726
• /
• 2015

This paper investigates the time dependent behaviour of Haarajoki test embankment on soft structured clay deposit. Half of the embankment is constructed on an area improved with prefabricated vertical drains, while the other half is constructed on the natural deposit without any ground improvement. To analyse the PVD-improved subsoil, axisymmetric vertical drains were converted into equivalent plane strain conditions using three different approaches. The construction and consolidation of the embankment are analysed with the finite element method using a recently developed anisotropic model for time-dependent behaviour of soft clays. The constitutive model, namely ACM-S accounts for combined effects of plastic anisotropy, interparticle bonding and degradation of bonds and creep. For comparison, the problem is also analysed with isotropic Soft Soil Creep and Modified Cam Clay models. The results of the numerical analyses are compared with the field measurements. The results show that neglecting effects of anisotropy, destructuration and creep may lead to inaccurate predictions of soft clay response. Additionally, the numerical results show that the matching methods accurately predict the consolidation behaviour of the embankment on PVD improved soft clays and provide a useful tool for engineering practice.

• 한국동물학회지
• /
• 제15권3호
• /
• pp.95-100
• /
• 1972

回復複製(unscheduled DNA synthesis or repair replication)와 染色體交換 및 分裂活動과의 相關關係를 추구하기 위해 X-線을 處理한 4種의 哺乳動物 細胞를 材料로 回復複製 時期와 線量反應을 調査하였다. 回復複製는 調査한 4種의 細胞에서 모두 일어나고 그 率은 照射線量에 比例하며 細胞 種類에 따라 差가 난다. 그러나 回復複製가 일어나는 時期는 細胞 種類에 관계없이 X-線 照射후 2時間까지 지속되고 있다. 또 回復複製의 相對量은 細胞의 種族染色體數, 分裂活動 및 染色體交換率과 직접적인 관련이 없다. 分裂活動能力과 染色體交換은 다 線量에 比例하나 그 率은 逆比例 관계를 나타낸다.

• 터널과지하공간
• /
• 제20권5호
• /
• pp.390-398
• /
• 2010

암석의 시간의존성 거동은 지하 광산 설계나 지하 암반구조물의 장기 안정성 평가를 위한 기본 입력자료로써 사용되는 매우 중요한 특성이다. 본 연구에서는 가곡광산에서 채취한 화강암 시험편에 대해 일축압축 크리프시험을 실시하였다. 측정된 크리프 변형률을 모사하기 위하여 Burgers 모형, Griggs 크리프법칙, Singh 크리프법칙을 사용하였으며 이중에서 Griggs 크리프법칙이 가곡광산 화강암의 실제 크리프 변형 거동을 가장 우수하게 모사하는 것으로 나타났다.

• Advances in nano research
• /
• 제12권2호
• /
• pp.167-183
• /
• 2022

In this paper, the free and forced vibration analysis of rotating cantilever nanoscale cylindrical beams and tubes is investigated under the external dynamic load to examine the nonlocal effect. A couple of nonlocal strain gradient theories with different beams and tubes theories, involving the Euler-Bernoulli, Timoshenko, Reddy beam theory along with the higher-order tube theory, are assumed to the mathematic model of governing equations employing the Hamilton principle in order to derive the nonlocal governing equations related to the local and accurate nonlocal boundary conditions. The two-dimensional functional graded material (2D-FGM), made by the axially functionally graded (AFG) in conjunction with the porosity distribution in the radial direction, is considered material modeling. Finally, the derived Partial Differential Equations (PDE) are solved via a couple of the generalized differential quadrature element methods (GDQEM) with the Newmark-beta techniques for the time-dependent results. It is indicated that the boundary conditions equations play a crucial task in responding to nonlocal effects for the cantilever structures.

• Journal of Microbiology and Biotechnology
• /
• 제20권9호
• /
• pp.1314-1321
• /
• 2010

Sulfur metabolism in S. cerevisiae is well established, but the mechanisms underlying the formation of sulfide remain obscure. Here, we investigated by real-time RT-PCR the dependence of expression levels of MET3, MET5/ECM17, MET10, MET16, and MET17 along with SSU1 on nitrogen availability in two wine yeast strains that produce divergent sulfide profiles. MET3 was the most highly expressed of the genes studied in strain PYCC4072, and SSU1 in strain UCD522. The strains behaved differently according to the sampling times, with UCD522 and PYCC4072 showing the highest expression levels at 120 h and 72 h, respectively. In the presence of 267 mg assimilable N/l, the genes were more highly expressed in strain UCD522 than in PYCC4072. MET5/ECM17 and MET17 were only weakly expressed in both strains under any condition tested. MET10 and SSU1 in both strains, but MET16 only in PYCC4072, were consistently upregulated when sulfide production was inhibited. This study illustrates that strain genotype could be important in determining enzyme activities and therefore the rate of sulfide liberation. This linkage, for some yeast strains, of sulfide production to expression levels of genes associated with sulfate assimilation and sulfur amino acid biosynthesis could be relevant for defining new strategies for the genetic improvement of wine yeasts.