• Structural Engineering and Mechanics
• /
• 제24권5호
• /
• pp.621-639
• /
• 2006

Stability of a cylindrical shell subject to a uniform axial compression, which is a power function of time, is examined within the framework of small strain elasto-plasticity. The material of the shell is incompressible and the effect of the elastic unloading is considered. Initially, employing the infinitesimal elastic-plastic deformation theory, the fundamental relations and Donnell type stability equations for a cylindrical shell have been obtained. Then, employing Galerkin's method, those equations have been reduced to a time dependent differential equation with variable coefficient. Finally, for two initial conditions applying a Ritz type variational method, the critical static and dynamic axial loads, the corresponding wave numbers and dynamic factor have been found. Using those results, the effects of the variations of loading parameters and the variations of power of time in the axial load expression as well as the variations of the radius to thickness ratio on the critical parameters of the shells for two initial conditions are also elucidated. Comparing results with those in the literature validates the present analysis.

• Earthquakes and Structures
• /
• 제4권6호
• /
• pp.607-627
• /
• 2013

The application of shape memory alloys (SMAs) to the seismic response reduction of civil engineering structures has attracted growing interest due to their self-centering feature and excellent fatigue performance. The loading rate dependence of SMAs raises a concern in the seismic analysis of SMA-based devices. However, the implementation of micromechanics-based strain-rate-dependent constitutive models in structural analysis software is rather complicated and computationally demanding. This paper investigates the feasibility of replacing complex rate-dependent models with rate-independent constitutive models for superelastic SMA elements in seismic time-history analysis. Three uniaxial constitutive models for superelastic SMAs, including one rate-dependent thermomechanical model and two rate-independent phenomenological models, are considered in this comparative study. The pros and cons of the three nonlinear constitutive models are also discussed. A parametric study of single-degree-of-freedom systems with different initial periods and strength reduction factors is conducted to examine the effect of the three constitutive models on seismic simulations. Additionally, nonlinear time-history analyses of a three-story prototype steel frame building with special SMA-based damping braces are performed. Two suites of seismic records that correspond to frequent and design basis earthquakes are used as base excitations in the seismic analyses of steel-braced frames. The results of this study show that the rate-independent constitutive models, with their parameters properly tuned to dynamic test data, are able to predict the seismic responses of structures with SMA-based seismic response modification devices.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.71-83
• /
• 2019

This investigation presented conventional triaxial and creep-permeability tests on sandstones considering thermally-induced damage (TID). The TID had no visible effects on rock surface color, effective porosity and permeability below $300^{\circ}C$ TID level. The permeability enlarged approximately two orders of magnitude as TID increased to $1000^{\circ}C$ level. TID of $700^{\circ}C$ level was a threshold where the influence of TID on the normalized mass and volume of the specimen can be divided into two linear phases. Moreover, no prominent variations in the deformation moduli and peak strength and strain appeared as TID< $500^{\circ}C$ level. It is interesting that the peak strength increased by 24.3% at $700^{\circ}C$ level but decreased by 11.5% at $1000^{\circ}C$ level. The time-related deformation and steady-state creep rate had positive correlations with creep loading and the TID level, whereas the instantaneous modulus showed the opposite. The strain rates under creep failure stresses raised 1-4 orders of magnitude than those at low-stress levels. The permeability was not only dependent on the TID level but also dependent on creep deformation. The TID resulted in large deformation and complexity of failure pattern for the sandstone.

• Steel and Composite Structures
• /
• 제50권1호
• /
• pp.15-24
• /
• 2024

This research presents dynamical reaction investigation of pore-dependent and nano-thickness beams having functional gradation (FG) constituents exposed to a movable particle. The nano-thickness beam formulation has been appointed with the benefits of refined high orders beam paradigm and nonlocal strain gradient theory (NSGT) comprising two scale moduli entitled nonlocality and strains gradient modulus. The graded pore-dependent constituents have been designed through pore factor based power-law relations comprising pore volumes pursuant to even or uneven pore scattering. Therewith, variable scale modulus has been thought-out until process a more accurate designing of scale effects on graded nano-thickness beams. The motion equations have been appointed to be solved via Ritz method with the benefits of Chebyshev polynomials in cosine form. Also, Laplace transform techniques help Ritz-Chebyshev method to obtain the dynamical response in time domain. All factors such as particle speed, pores and variable scale modulus affect the dynamical response.

• 터널과지하공간
• /
• 제14권1호
• /
• pp.69-77
• /
• 2004

암석의 시간 의존 변형거동은 암석의 가장 근본적인 역학적 성질 중의 하나이며, 크립거동의 특성과 메커니즘에 대한 연구는 지하 암반 구조물의 장기적 안정성을 평가하는데 필수적이라 할 수 있다. 이에 본 연구에서는 국내 화강암을 대상으로 단축압축하중 하에서 크립시험을 실시하였고, 수분과 응력 수준을 달리하여 각각의 조건에 따른 크립 특성을 비교, 분석하였다. 크립시험 결과 화강암은 1차, 2차 및 3차로 확연히 구분된 크립거동을 보였다. 1차 크립거동은 대체로 24시간 내에 종결되었으며, 2차 크립 변형률은 단축압축강도에 대한 재하응력의 비율이 증가함에 따라 증가하였다. 일정 응력하에서 화강암의 최대강도는 시간에 따라 감소하는 경향을 보였다. 완전 포화된 시료는 자연 건조된 시료보다 훨씬 큰 크립 변형량 및 변형률을 보였으며, 포화시료의 파괴강도 및 파괴시간은 급격히 감소하였다. 본 연구의 크립시험 결과를 버거모델(Burger's model) 및 이전 연구자들에 의해 제안된 두 개의 경험적 모델에 적용하여 크립의 유동상수를 구하였다. 세 개의 모델 모두 화강암의 크립거동을 잘 나타내었으나, 그 중 버거모델이 실험결과와 가장 잘 일치하였다. 각각의 모델에서 결정된 유동상수들은 함수량과 응력 수준에 영향을 받았다. 또한 본 실험결과에 기초하여 자연건조 및 완전 포화된 화강암 시료에 대하여 응력 수준과 시간의존변형의 경험적 관계식을 유도하였다.

• 대한의생명과학회지
• /
• 제18권3호
• /
• pp.201-209
• /
• 2012

Apoptosis is a physiological programmed cell death process. Tubercle bacilli inhibit apoptosis of alveolar macrophages and phagolysosome fusion. We investigated whether the Bcl-2 family anti-apoptotic member, Bfl-1/A1, plays an important role in the anti-apoptotic process during mycobacterial infection. PMA-treated human monocytoid THP-1 cells were infected with mycobacteria (H37Rv, BCG, and K-strain) at a multiplicity of infection (MOI) of 10 for 0, 1.5, 3, 6, 9, 12, 18, 24, 48, or 72 h. In addition, PMA-treated THP-1 cells were pretreated with specific inhibitors for 45 min before stimulation with mycobacteria at an MOI of 10 for 4 h. After the indicated time, the cells were subject to reverse transcription-polymerase chain reaction (RT-PCR) analysis, and a Bfl-1/A1-specific Western blot was performed. In PMA-differentiated THP-1 cells, the expression level of Bfl-1/A1 mRNA was increased by Mycobacterium tuberculosis (MTB) H37Rv infection. The mRNA level of Bfl-1/A1 peaked 3 h after MTB infection, then declined gradually until 9 h. However, Bfl-1/A1 mRNA induction gradually re-increased from 24 h to 72 h after MTB infection. No difference in Bfl-1/A1 expression was detected following infection with MTB H37Rv, K-strain, or M. bovis BCG. These results were not dependent on mycobacterial virulence. Moreover, mRNA levels of other anti-apoptotic molecules (Mcl-1, Bcl-2, and Bcl-xL) were not increased after MTB H37Rv or K-strain infection. These results suggest that mycobacteria induce the innate immune host defense mechanisms that utilize Bfl-1/A1 molecules at early time points, regardless of virulence.

• 대한치과보철학회지
• /
• 제43권6호
• /
• pp.717-726
• /
• 2005

Statement of problem. One of the common problems of provisional crown and fixed partial denture materials is that when they are subjected to constant loads for a long period of time, they exhibit a dimensional change (creep). Purpose. The aim of this study was to investigate the viscoelastic behaviour of polymer-based provisional crown and fixed partial denture materials with time at constant compressive load. Material and methods. Three dimethacrylate-based materials (Protemp 3 Garant, Temphase, Luxatemp) and one monomethacrylate-based material (Trim) were selected. Dimensional changes of the specimens were recorded by a LVDT to evaluate their viscoelastic behavior and creep strain. For all specimens, two loading procedures were used. At first, static compressive stress of 4 MPa was applied for 30 minutes and followed by 1 hour of strain recovery. Then, after 24 hours of water storage, the specimens were loaded again. The creep values between materials were statistically analyzed using one-way ANOVA and multiple comparison $Scheff\acute{e}$ test. Independent samples t-test was also used to identify the difference of creep strain between first and secondary loading conditions at the significance level of 0.05. Results. Following application of the first loading, Trim showed the highest maximum creep strain (32.7%) followed by Luxatemp, Protemp 3 Garant and Temphase, with values of 3.78%, 2.86% and 1.77%, respectively. Trim was significantly different from other materials (P<0.05), while there were no significant differences among Luxatemp, Protemp 3 Garant and Temphase (P>0.05). The highest recovery and permanent set of Trim, were significantly different from those of others (P<0.05). At the secondary loading of the dimethacrylate-based materials, creep deformation, recovery and permanent set decreased and the percentage of recovery increased, while in Trim, all values of the measurements increased. This result showed that the secondary loading at 24 hours produced a significant creep magnitude. Conclusion. The dimethacrylate-based provisional crown and fixed partial denture materials showed significantly higher creep resistance and lower deformation than the monomethacrylate-based material. Thus, monomethacrylate-based materials should not be used in long-term stress-bearing situations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.538-541
• /
• 2006

PSC(Prestressed Concrete) box girder bridges have been widely applied in Korea. A number of these bridges have been built by the segmental construction method in the longitudinal direction and(or) vertically along the cross-sectional depth with MSS(Moving Scaffolding System). An actual 2-span continuous PSC box girder bridge of Kyeongbu high speed railway was selected and instrumented with 96 vibrating wire embedded type strain gauges and 2 thermocouples. The long-term behavior of the bridge was monitored through two major points located at mid-span of the first span and at the internal support. Data collection started just after the casting of the first segment (U section). Concrete strain and temperature data were gathered regularly by a data logger (CR10) during 600 days under and after construction. According to this measurement, the parabolic longitudinal strain distribution in the top slab at mid-span is shown. And also, the same distribution at the interior support is shown. The compressive strains at the cantilever region are larger than at the web position and the internal part in the top slab. Strain difference largely happened during the early construction period.

• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.39-46
• /
• 2010

IIn this study, used is the equivalent loading method based on the inherent strain to predict the welding deformation of panel members. Equivalent loads are computed from the inherent strain distribution around weld line, and then applied for the linear finite element analysis. Thermal deformation of panel members can be, of course, carried out through the rigorous thermal elasto-plastic analysis procedure but it is not practical in applying to predicting the welding deformation of large structures such as blocks found in a ship structure from view of computing time. The present equivalent load approach has been applied to flat plate model to verify the present approach, and to several curved plate models having the curvature in the welding direction to investigate the effect of the longitudinal curvature upon the weld-induced deformation. The results are compared with those by thermal elasto-plastic analysis. As far as the present results are concerned, it can be said that the present approach shows good agreement with the results by welding experiment and the rigorous thermal elasto-plastic analysis. The present approach has been also applied to predict the welding deformation of panel block as for application illustration to practical model.

• Advances in nano research
• /
• 제8권1호
• /
• pp.13-24
• /
• 2020

In this paper, for the first time based on the nonlocal strain gradient theory the effect of size dependency in torsional vibration of bi-direction functionally graded (FG) nonlinear nano-cone is study. The material properties were assumed to vary according to the arbitrary function in radial and axial directions. The Navier equation and boundary conditions of the size-dependent bidirectional FG nonlinear nano-cone were derived by Hamilton's principle. These equations were solved by employing the generalized differential quadrature method (GDQM). The presented model can turn into the classical model if the material length scale parameters are taken to be zero. The effects of some parameters, such as inhomogeneity constant, cross-sectional area parameter and small-scale parameters, were studied. As an essential result of this study can be stated that an FG nano-cone model based on the nonlocal elasticity theory behaves softer and based on the strain gradient theory behaves harder.