• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1134-1147
• /
• 1995

POD (proper orthogonal decomposition) is applied to turbulent leading-edge separation bubble to extract coherent structures. A two-dimensional leading-edge separation bubble is simulated by discrete-vortex method, where a time-dependent source forcing is incorporated. Based on the wealth of numerical data, POD is applied in a range of the forcing amplitude ( $A_{o}$ = 0, 0.5, 1.0 and 1.5) and forcing frequency (0 .leq. $f_{F}$H/ $U_{\infty}$.leq. 0.3). It is demonstrated that the structures of POD have noticeable changes with local forcings. In an effort to investigate the mechanism of decreasing reattachment length, dynamic behaviors of the expansion coefficients and contributions of the eigenfunctions of POD are scrutinized. As the forcing amplitude increases, the large-scale vortex structures are formed near the forcing amplitude increases, the large-scale vortex structures are formed near the separation point and the flow structures become more organized and more regular, accompanying with the reduction of reattachment length. By further inverstigation of POD global entropy, it is seen that the reattachment length is closely linked to the degree of organization of the flow structures.es.s.

• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.734-741
• /
• 2003

This paper addresses the vibration mode shape Measurement technique utilizing a Continuous Scanning Laser Doppler Vibrometer (CSLDV). The continuous scanning capability is added to the conventional discrete Laser Doppler Vibrometer by reflecting the laser beams on the surface of the object using two oscillating mirrors. The bow scanning resulted from the proposed scanning method is eliminated by feedback control. The velocity output signal from the CSLDV is modulated to give the spatial velocity distribution in terms of coefficients which are obtained from the Fast Fourier Transformation of the time dependent velocity signal. Using the Chebyshev series from, the analysis of the vibration mode shape techniques for straight line scanning and 2 dimensional scanning are presented and discussed. The performance of the proposed SLDV is presented using the experimental results of the vibration mode shape of a cantilever and plate

• 환경위생공학
• /
• 제11권2호
• /
• pp.27-31
• /
• 1996

2,4,6-Trinitrotoluene(TNT) was reduced into intermediate products by mixed culture incubated in anaerobic condition. To test the effects of extracellular material to electron transfer between sulfide and TNT, filtered medium of mixed culture was loaded in the test tubes with TNT and sulfide. The transformation rate was measured under four different conditions. The rate under microbial activity was the fastest among under different conditions. With sulfide or filtrate alone and TNT, the reactions were measured as the slowest reactions or no reactions occured, respectively. The reaction rate coefficient were calculated by linear regression and the first order kinetic was fitted best. Also, the plot of rate coefficients (K$_{f}$) showed linear relationships when at time zero TNT and sulfide concentration were 20 mg/1 and 6.0 mM, respectively. By extrapolation, reaction rate coefficient of 100% filtrate could be calculated as 0.0054/minute. However, reaction rate was affected by different concentration of sulfide, so it is a dependent of sulfide concentration. The results of this test showed TNT reduction rate can be limited more by microbial reaction than by mediation of filtrate or sulfide and filtrate alone.

• 한국진공학회지
• /
• 제11권2호
• /
• pp.108-112
• /
• 2002

AC 플라즈마 디스플레이 패널의 보호막으로 널리 사용되고 있는 MgO막의 2차 전자 방출계수를 저에너지 불활성 기체이온에 대해 펄스 이온빔 기법으로 측정하였다. 실리콘 산화막의 헬륨이온에 의한 2차 전자 방출계수는 300 eV에서 0.82를 보였지만 50 eV에서는 0.22보여 운동에너지에 대한 상당한 의존성을 보였다. 한편, MgO막의 이차전자 방출계수는 이온에 의한 스퍼터링이 지속됨에 따라 0.62에서 0.3으로 감소함으로써 이온충돌이 MgO의 이차전자 방출계수에 상당한 영향을 미치는 것을 확인할 수 있었다.

• 한국식품조리과학회지
• /
• 제23권1호통권97호
• /
• pp.1-8
• /
• 2007

Extraction conditions were optimized using response surface methodology for preparing high-quality, hot water extracts from cultivated Chrysanthemum indicum L. petals. A fractional factorial design was applied to investigate the effects of added sample ratio ($X_1$), extraction temperature ($X_2$) and extraction time ($X_3$) variables on extract properties, such as, soluble solid contents ($Y_1$), sugar content ($Y_2$), ?E ($Y_3$), turbidity ($Y_4$), total phenol ($Y_5$) and DPPH ($Y_6$). Second-order models were employed to generate a 3-dimensional response surface for dependent variables and their coefficients of determination ($R^2$) ranged from 0.8408${\sim}$0.9914. The range of optimum conditions at $80^{\circ}C$ extraction for maximize characteristics of hot water extracts was 2.3${\sim}$2.7 g and 9.2${\sim}$11.2 hr.

• 한국공간구조학회논문집
• /
• 제10권1호
• /
• pp.75-84
• /
• 2010

CIT 기둥의 장기거동에 관한 기존의 연구과 실험자료에 의하면 크리프 및 건조수축계수는 외부 강관의 구속효과에 의하여 철근콘크리트 기둥보다 작은 값을 가진다. 본 연구에서는 불확실성이 큰 콘크리트 강도와 특정크리프값과 작용하중을 매개변수로 하여 37층 건물의 CFT 기둥에 대한 확률론적 해석을 수행하였으며 매개변수의 특성을 분석하고 CFT 기둥의 축소량 해석값의 예측범위를 정량화하였다. 본 논문에서는 CFT 기둥축소량의 확률론적 해석을 위한 몬테카를로 (Monte Carlo) 기법을 소개하며 다중매개변수를 동시에 적용하여 매개변수의 변동에 따른 축소량의 영향을 분석하고 신뢰지수별 변동폭을 산정하였다.

• Advanced Composite Materials
• /
• 제17권4호
• /
• pp.359-372
• /
• 2008

The moisture absorption behavior of carbon fiber-reinforced plastic (CFRP) and its effect on dimensional stability were examined. Moisture diffusivity in CFRP was determined by measuring a specimen's weight during the moisture absorption test. Three types of CFRP specimens were prepared: a unidirectionally reinforced laminate, a quasi-isotropic laminate and woven fabric. Each CFRP was processed into two geometries - a thin plate for determination of diffusivity and a rod with a square cross-section for the discussion of two-dimensional diffusion behavior. By solving Fick's law expanded to 3 dimensions, the diffusivities in the three orthogonal directions were obtained and analyzed in terms of the anisotropy of CFRP moisture diffusion. Coefficients of moisture expansion (CMEs) were also obtained from specimen deformation caused by moisture absorption. During moisture absorption, the specimen surfaces showed larger deformation near the edges due to the distribution of moisture contents. This deformation was reasonably predicted by the finite element analysis using experimentally determined diffusivities and CMEs. For unidirectional CFRP, the effect of the fiber alignment on CME was analyzed by micromechanical finite element analysis (FEA) and discussed.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.267-274
• /
• 1999

Since the seismic response of dams can be strongly influenced by the dam-reservior interaction in needs to be taken into account in the seismic design of dams. In general a substructure method is employed to solve the dam-reservoir interaction problem in which the dam body is modeled with finite elements and the infinite region of a reservoir using a transmitting boundary. When the water is modeled as a compressible fluid the equation is formulated in frequency domain. But nonlinear behavior of dam body cannot be studied easily in the frequency domain method. In this study time domain formulation of the dam-reservoir-soil interaction is proposed based onthe lumped parameter modeling of the reservoir region, The frequency dependent dynamic-stiffness coefficients of the reservoir are converted into frequency independent lumped-parameters such as masses dampers and springs. The soil-structure interactionis modeled using lumped parameters in similar way. the ground is assumed as a visco-elastic stratum on the rigid bedrock. The dynamic stiffnesses of the rigid surface foundation are calculated using the hyperelement method and are converted into lumped parameters. The application example demonstrated that the lumped parameter model gives almost identical results with the frequency domain formulation.

• 한국해안해양공학회지
• /
• 제7권1호
• /
• pp.108-115
• /
• 1995

본 논문에서는 충격파력을 받는 케이슨 방파제의 동적거동해석 모델에 대해서 연구하였다. 케이슨 구조는 강체로 가정하였으며, 기초사석 및 지반은 반무한탄성지반이론에 의거하여 가상 부가질량, 스프링 및 감쇠계수로 이상화하였다. 주파수 의존 유체의 부가질량 및 감쇠계수는 시간기억함수와 무한대 주파수에 대한 부가질량으로 나타내었다. 또한, 케이슨의 영구적 활동을 모의하기 위하여 수평방향의 스프링을 형성거동을 하는 비선형 스프링으로 모형화하였다. 수리실험치와 비교결과, 본 모델은 상당히 좋은 결과를 줌을 알 수 있었다. 케이슨의 동적 거동에 영향을 주는 주요 인자의 변화에 따른 민감도 해석을 수행하였으며, 케이슨의 영구적 활동거리 및 한계중량 예측에의 적용성조사를 위한 수치실험도 병행하였다.

• Bulletin of the Korean Chemical Society
• /
• 제14권5호
• /
• pp.567-574
• /
• 1993

Mordant Red 19(MR19) is reduced at mercury electrode at -0.67 V vs. Ag/AgCl with two electrons per molecule in pH 9.2 buffer by differential pulse polarography and linear sweep voltammetry. The peak potential is dependent on the pH of solution. The exhaustive electrolysis, however, gives 4 electrons per molecule because of the disproportionation of the unstable hydrazo intermediate. The electrochemical reduction of lanthanide-MR19 complexes is observed at more cathodic potential than that of free ligand. The difference in peak potentials between complex and free ligand varies from 75 mV for $La^{3+}$ to 165 mV for $Tb^{3+}$ and increases with increasing the atomic number of lanthanide. The electrochemical reduction of lanthanide complexes with MR19 is due to the reduction of ligand itself, and it can be potentially useful as an indirect method for the determination of lanthanides. The shape of i-E curves and the scan rate dependence indicates the presence of adsorption and the adsorption was confirmed by potential double-step chronocoulometry and the effect of standing time. Also the surface excess of the adsorbed species and diffusion coefficients are determined. The composition of the complex is determined to be 1 : 2 by spectrophotometric and electrochemical methods.