• 한국항해항만학회지
• /
• 제48권2호
• /
• pp.116-124
• /
• 2024

Automatic docking of small planing ship is a critical aspect of maritime operations, requiring accurate prediction of motion states to ensure safe and efficient maneuvers. This study investigates the use of Artificial Neural Network (ANN) to predict motion state of a small planing ship to enhance navigation automation in port environments. To achieve this, simulation tests were conducted to control a small planing ship while docking at various heading angles in calm water and in waves. Comprehensive analysis of the ANN-based predictive model was conducted by training and validation using data from various docking situations to improve its ability to accurately capture motion characteristics of a small planing ship. The trained ANN model was used to predict the motion state of the small planning ship based on any initial motion state. Results showed that the small planing ship could dock smoothly in both calm water and waves conditions, confirming the accuracy and reliability of the proposed method for prediction. Moreover, the ANN-based prediction model can adjust the dynamic model of the small planing ship to adapt in real-time and enhance the robustness of an automatic positioning system. This study contributes to the ongoing development of automated navigation systems and facilitates safer and more efficient maritime transport operations.

• 한국운동역학회지
• /
• 제27권1호
• /
• pp.53-58
• /
• 2017

Objective: The purpose of this study was to compare the accuracy of stride time and stride length provided by a commercial APDM inertial sensor system (APDM) with the results of three dimensional motion capture system (3D motion) during treadmill walking. Method: Five healthy men participated in this experiment. All subjects walked on the treadmill for 3 minutes at their preferred walking speed. The 3D motion and the APDM were simultaneously used for extracting gait variables such as stride time and stride length. Mean difference and root mean squared (RMS) difference were used to compare the measured gait variables from the two measurement devices. The regression equation derived from the range of motion of the lower limb was also applied to correct the error of stride length. Results: The stride time extracted from the APDM was almost the same as that from the 3D motion (the mean difference and RMS difference were less than 0.0001 sec and 0.0085 sec, respectively). For stride length, mean difference and RMS difference were less than 0.1141 m and 0.1254 m, respectively. However, after correction of the stride length error using the derived regression equation, the mean difference and the RMS difference decreased to 0.0134 m and 0.0556 m or less, respectively. Conclusion: In this study, we confirmed the possibility of using the temporal variables provided from the APDM during treadmill walking. By applying the regression equation derived only from the range of motion provided by the APDM, the error of the spatial variable could be reduced. Although further studies are needed with additional subjects and various walking speeds, these results may provide the basic data necessary for using APDM in treadmill walking.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.143-146
• /
• 2000

Motion Estimation/compensation(ME/MC) is one of the efficient interframe ceding techniques for its ability to reduce the high redundancy between successive frames of an image sequence. Calculating the blocking matching takes most of the encoding time. In this paper a new fast block matching algorithm(BMA) is developed for motion estimation and for reduction of the computation time to search motion vectors. The feature of the new algorithm comes from the center-biased checking concept and the trend of pixel movements. At first, Motion Vector(MV) is searched in ${\pm}$1 of search area and then the motion estimation is exploited in the rest block. The ASP and MSE of the proposed search algorithm show good performance.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.175-183
• /
• 2005

This study investigates the kinetic characteristics of the Driggs motion in horse vaulting by stages through the three-dimensional video analysis of YTY and TABARA who won a high score and a low score respectively from the Driggs motion in horse vaulting during the Daegu Universiade 2003, which involves putting one's hands on the horse vaulting rotating sideways, stretching and rotating backward in the air, and twisting 900 degrees, so as to help develop the techniques of Korean gymnastic athletes. From the analyses of the duration of body center, horizontality, vertical position and horizontality, vertical speed and angle factors for each of four phases from the contact of the board to the takeoff from the horse vaulting. I arrived at the following conclusions: 1. It was found that the motion of bending oneself forward while rapidly stretching the knee joint when taking off from the board increases the horizontal speed of body center and shortens the time of the first jump. 2. It was found that S1 who won a high score shortened the time of the contact and takeoff from the horse vaulting and enlarged the shoulder joint angle for full blocking motion. It was also found that horizontal speed decreased while vertical speed increased when you rapidly stretch the right elbow joint while taking off from the horse vaulting. 3. It was found that horizontal distance was shortened to increase the height and time of staying in the air during the second jump.

• 대한인간공학회지
• /
• 제11권2호
• /
• pp.15-21
• /
• 1992

This paper presents the ROBOT MODAPTS(Modular Arrangement of Predetermi- ned Time Standards) technique which can be applied to the robot motion analysis. Robot motions are easily divided into several movement activities and terminal activi- ties by means of the ROBOT MODAPTS technique Each link of robot arm is numbered such that finger is 1, hand is 2, elbow is 3, and so on. The robot motion time of each link is counted by multipling its given number to some time values observed at the finger movement. We can easily estimate robot teaching task time with this technique. This technique can be applied efficiently to establishing an adaptable robot motion ergonomically.

• Bulletin of the Korean Chemical Society
• /
• 제15권2호
• /
• pp.118-122
• /
• 1994

Molecular dynamics simulation was carried out to study density effects on vibrational dephasing. Because of difficulty due to large time scale difference between vibrational motion and vibrational relaxation, we adopt adiabatic approximation in which the vibrational motion is assumed to be much faster than translational and rotational motion. As a result, we are able to study vibrational dephasing by simulating motion of rigid molecules. It is shown that the dephasing time is decreased as density increases and the contribution to this result is mainly due to the mean-squared frequency fluctuation.

• 대한조선학회지
• /
• 제38권3호
• /
• pp.88-92
• /
• 2001

H. Kim, B.K. Lee and C.K. Rheem have been experimentally studied to clarified the mechanism of thrust force generated by sculling motion for the propulsion of Korean small boats. The experimental investigations have been conducted under the bollard condition by installing a scull at the end of a trimming tank of towing tank. The sculling motion produced by the skilful fisherman and the resultant venerated forces have been measured in respect to the Cartesian coordinate fitted to the pivot point of the scull. ("An Experimental Study on the Propulsive Characteristics of Sculls". J. of the Soc. of Naval Arch. of Korea, Vol. 26, No. 3, 1989, pp.13-24) Through these experiments the trajectory of the blade tip and the angular displacement of the blade section have been measured as shown in Fig. 1 and 2 of this paper. And at the same time the resultant hydrodynamic force components are expressed in Fig. 3 and 4. These three dimensional data of sculling motion and generated real time force components are the unique experimental information which could clarify the thrust force generating mechanism of sculling motion. The experimental results have been reanalyzed by focusing the relation between instantaneous attack angle of blade section and the resultants real time force components. Through these investigation it is found out that the conventional imagination that the 7cull motion should be effective in generating lift force must be reconsidered because the attack angle of scull blade are too great to free from stall phenomena during the sculling operation.

• 한국정보통신학회논문지
• /
• 제12권3호
• /
• pp.527-533
• /
• 2008

움직임 보상은 고화질의 실시간 비디오 응용에 있어서 언제나 주된 병목을 초래한다. 따라서 실시간 비디오 응용에서는 움직임 보상을 수행하는 고속의 전용 하드웨어를 필요로 한다. 여러 동영상 부호화 방식에서 영상프레임은 픽셀의 블록으로 분할된다. 일반적으로 움직임 보상은 이전 프레임으로부터 움직임을 추정하여 현재의 블록을 예측하게 된다. 움직임 보상에 사용되는 화소 정밀도가 높을수록 보다. 좋은 성능을 갖지만 연산량은 증가하게 된다. 본 논문에서는 1/4 화소 정밀도를 지원하는 H.264/AVC 부호화기에 적합한 움직임 보상기의 아키텍처를 연구하였다. 설계된 움직임 보상기는 전치 배열과 휘도 6-tap 필터 3개를 사용하여 높은 하드웨어 이용률을 갖게 하였으며 내부 메모리의 크기를 감소시켰다. VHDL을 사용하여 기술하였으며, Xilinx ISE툴을 사용하여 합성하고, Modelsim_6.1i를 사용하여 검증하였다. 설계된 움직임 보상기는 단지 3개의 6-tap 필터만을 사용하면서 매크로블록 당 640 클럭 사이클에 수행하였다. 본 논문에서 제안하는 움직임 보상기는 실시간 비디오 처리를 요구하는 분야에 응용 가능할 것으로 사료된다.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.67-79
• /
• 2003

The purpose of this study is to investigate the effective skill motion through the kinematic analysis of the Yurchenko Streched motion in new horse vaulting. The subjects in this study were 3 male gymnasts who were ranked as national athletes. After the 3D motion analysis, kinematic variables were analyzed to comparison with the difference between this study and the previous study(Yang, D. Y and Lee, C. S, 1999). As a result, the following conclusions was drawn; 1. In the board contact phase, this study showed a shorten contact time to maintain in condition highly extension of hip and hee angle than the previous study. 2. In the pre-flight phase, this study appeared more shortly flight duration time and horizontal flight displacement than the previous study. 3. In the horse contact phase, the contact duration time and horizontal displacement of COG shortened than the previous study, but appeared to the fast horizontal and vertical velocity and highly extension of shoulder an. 4. In the post-flight phase, a stable horse contact appeared to the increase of the flight duration time and the apex height during the post-flight. And it showed that these results have a stable and good landing.

• 한국운동역학회지
• /
• 제17권2호
• /
• pp.23-29
• /
• 2007

The purpose of this study was to examine if there are kinematic variables differences between national representative players (NRP) and non national representative players (NNRP) during 500 m inline skate starting motion. Four NRP and six NNRP were recruited for the study. Each subject executed starting motion five times on a $2{\times}12m$ start way in a gymnasium. Kinematic variables were analyzed by the three-dimensional motion analysis system (60Hz). It was hypothesized that there are difference in elapsed time and center of mass acceleration in starting phase between groups since starting phase has been considered important in sprinting. The results showed that the NRP had significantly shorter starting phase time than that of NNRP. 1) An elapsed time in phase P1 of NRP was shorter than that of NNRP, and excellent players have early started their first stroke. 2) Both NRP and NNRP have started at the same spot, and displacement of the center of gravity in starting posture of NRP group was at the front compared to NNRP group. 3) Average step lengths of NRP were longer than those of NNRP, and a step change of NRP was stabler compared to that of NNRP. 4) In a speed change of the center of gravity NRP showed comparatively high speed from P1 to P4.