• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.207-215
• /
• 2019

This study was conducted to establish spring sowing techniques in preparation for the impacts of climate change on sowing time and wintering rates of winter forage crops such as barley, oat and IRG. Oat showed the highest yield in 2017 which had relatively dry climate condition. And when sowing in late Febrnary 2017 yielding 9,408kg/ha were obtained, yielding 4,011kg/ha more than IRG's sown in the same period. In 2018 which had relatively wet climate condition, four barley species decreased in the production from the previous year. Oat also had decreased by 70% from 9,408kg/ha to 2,851kg/ha. On the other hand, IRG maintained the production in the mid-5,000kg/ha range. It was also found that IRG had the least variability due to external influences regardless of seeding period for 2 years. Mixed sowing with IRG and oat in 50:50 ratio was the highest dry matter, 6,584kg/ha, and IRG was 18.5% and Oat was 2.3 times higher than single planting.

• Journal of Intelligence and Information Systems
• /
• v.19 no.3
• /
• pp.73-91
• /
• 2013

Advertising market has been facing new challenges due to dramatic change in advertising channels and the advent of innovative media such as mobile devices. Recent research related to mobile devices is mainly focused on the fact that mobile devices could identify users'physical location in real-time, and this sheds light on how location-based technology is utilized to achieve competitive advantage in advertising market. With the introduction of smartphone, the functionality of smartphone has become much more diverse and context awareness is one of the areas that require further study. This work analyses the influence of context awareness value resulted from the transformation of advertising channel in mobile communication market, and our research result reflects recent trend in advertising market environment which is not considered in previous studies. Many constructs has intensively been studied in the context of advertising channel in traditional marketing environment, and entertainment, irritation and information are considered to be the most widely accepted variables that has positive relationship with advertising value. Also, in smartphone advertisement, four main dimensions of context awareness value are recognized: identification, activity, timing and location. In this study, we assume that these four constructs has positive relationship with context awareness value. Finally, we propose that advertising value and context awareness value positively influence smartphone advertising attitude. Partial Least Squares (PLS) structural model is used in our theoretical research model to test proposed hypotheses. A well designed survey is conducted for college students in Korea, and reliability, convergent validity and discriminant validity of constructs and measurement indicators are carefully evaluated and the results show that reliability and validity are confirmed according to predefined statistical criteria. Goodness-of-fit of our research model is also supported. In summary, the results collectively suggest good measurement properties for the proposed research model. The research outcomes are as follows. First, information has positive impact on advertising value while entertainment and irritation have no significant impact. Information, entertainment and irritation together account for 38.8% of advertising value. Second, along with the change in advertising market due to the advent of smartphone, activity, timing and location have positive impact on context awareness value while identification has no significant impact. In addition, identification, activity, location and time together account for 46.3% of context awareness value. Third, advertising value and context awareness value both positively influence smartphone advertising attitude, and these two constructs explain 31.7% of the variability of smartphone advertising attitude. The theoretical implication of our research is as follows. First, the influence of entertainment and irritation is reduced which are known to be crucial factors according to previous studies related to advertising value, while the influence of information is increased. It indicates that smartphone users are not likely interested in entertaining effect of smartphone advertisement, and are insensitive to the inconvenience due to smartphone advertisement. Second, in today' ubiquitous computing environment, it is effective to provide differentiated advertising service by utilizing smartphone users'context awareness values such as identification, activity, timing and location in order to achieve competitive business advantage in advertising market. For practical implications, enterprises should provide valuable and useful information that might attract smartphone users by adopting differentiation strategy as smartphone users are sensitive to the information provided via smartphone. Also enterprises not only provide useful information but also recognize and utilize smarphone users' unique characteristics and behaviors by increasing context awareness values. In summary, our result implies that smartphone advertisement should be optimized by considering the needed information of smartphone users in order to maximize advertisement effect.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2021

To investigate the effect of freshwater discharge on the seawater circulation in the semi-closed harbor, a 3-D hydrodynamic model was applied to the International Ferry Terminal (IFT). The model run is conducted for 45 days (from May 15 to June 30, 2020), and the reproducibility of the model for time-spatial variability of current velocity and salinity was verified by comparison with model results and observation data. There are two sources of freshwater towards inside of the IFT: Han River and water reservoir located in the eastern part of IFT. In residual current velocity results, the two-layer circulation (the seaward flow near surface and the landward flow near bottom)derived from the horizontal salinity gradient in only considering the discharge from a Han River is more developed than that considering both the Han River and water reservoir. This suggests that the impact of freshwater from the reservoir is greater in the IFT areas than that from a Han River. Additionally, the two-layer circulation is stronger in the IFT located in southern part than Incheon South Port located in northern part. This process is formed by the interaction between tidal current propagating into the port and freshwater discharge from a water reservoir, and flow with a low salinity (near 0 psu) is delivered into the IFT. This low salinity distribution reinforces the horizontal stratification in front of the IFT, and maintains a two-layer circulation. Therefore, local sources of freshwater input are considered to estimate for mass transport process associated with the seawater circulation within the harbor and It is necessary to perform a numerical model according to the real-time freshwater flow rate discharged.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.221-229
• /
• 2022

This study was aimed to investigate spatial and vertical characteristics of greenhouse environments according to the location of the environmental sensors, and to investigate the correlations between temperature, light intensity, and carbon dioxide (CO₂) concentration according to the type of greenhouse. Temperature, relative humidity (RH), CO₂, and light sensors were installed in the four-different vertical positions of the whole canopy as well as ground and roof space at the five spatial locations of the Venlo greenhouse. Also, correlations between temperature, light intensity, and CO₂ concentration in Venlo and semi-closed greenhouses were analyzed using the Curve Expert Professional program. The deviations among the spatial locations were larger in the CO₂ concentration than other environmental factors in the Venlo greenhouse. The average CO₂ concentration ranged from 465 to 761 µmol·mol^-1 with the highest value (646 µmol·mol^-1) at the Middle End (4ME) close to the main pipe (50Ø) of the liquefied CO₂ gas supply and lowest (436 µmol·mol^-1) at the Left Middle (5LM). The deviation among the vertical positions was greater in temperature and relative humidity than other environments. The time zone with the largest deviation in average temperature was 2 p.m. with the highest temperature (26.51℃) at the Upper Air (UA) and the lowest temperature (25.62℃) at the Lower Canopy (LC). The time zone with the largest deviation in average RH was 1 p.m. with the highest RH (76.90%) at the LC and the lowest RH (71.74%) at the UA. The highest average CO₂ concentration at each hour was Roof Air (RF) and Ground (GD). The coefficient of correlations between temperature, light intensity, and CO₂ concentration were 0.07 for semi-closed greenhouse and 0.66 for Venlo greenhouse. All the results indicate that while the CO₂ concentration in the greenhouse needs to be analyzed in the spatial locations, temperature and humidity needs to be analyzed in the vertical positions of canopy. The target CO₂ fertilization concentration for the semi-closed greenhouse with low ventilation rate should be different from that of general greenhouses.

• Science of Emotion and Sensibility
• /
• v.26 no.3
• /
• pp.149-160
• /
• 2023

This study develops a time-varying system-based noncontact fabric sensor that can measure cerebral blood-flow signals to explore the possibility of brain blood-signal detection and emotional evaluation. The textile sensor was implemented as a coil-type sensor by combining 30 silver threads of 40 deniers and then embroidering it with the computer machine. For the cerebral blood-flow measurement experiment, subjects were asked to attach a coil-type sensor to the carotid artery area, wear an electrocardiogram (ECG) electrode and a respiration (RSP) measurement belt. In addition, Doppler ultrasonography was performed using an ultrasonic diagnostic device to measure the speed of blood flow. The subject was asked to wear Meta Quest 2, measure the blood-flow change signal when viewing the manipulated image visual stimulus, and fill out an emotional-evaluation questionnaire. The measurement results show that the textile-sensor-measured signal also changes with a change in the blood-flow rate signal measured using the Doppler ultrasonography. These findings verify that the cerebral blood-flow signal can be measured using a coil-type textile sensor. In addition, the HRV extracted from ECG and PLL signals (textile sensor signals) are calculated and compared for emotional evaluation. The comparison results show that for the change in the ratio because of the activation of the sympathetic and parasympathetic nervous systems due to visual stimulation, the values calculated using the textile sensor and ECG signals tend to be similar. In conclusion, a the proposed time-varying system-based coil-type textile sensor can be used to study changes in the cerebral blood flow and monitor emotions.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.28-35
• /
• 2006

Statistical models of shape variability based on active shape models (ASMs) have been successfully utilized to perform segmentation and recognition tasks in two-dimensional (2D) images. Three-dimensional (3D) model-based approaches are more promising than 2D approaches since they can bring in more realistic shape constraints for recognizing and delineating the object boundary. For 3D model-based approaches, however, building the 3D shape model from a training set of segmented instances of an object is a major challenge and currently it remains an open problem in building the 3D shape model, one essential step is to generate a point distribution model (PDM). Corresponding landmarks must be selected in all1 training shapes for generating PDM, and manual determination of landmark correspondences is very time-consuming, tedious, and error-prone. In this paper, we propose a novel automatic method for generating 3D statistical shape models. Given a set of training 3D shapes, we generate a 3D model by 1) building the mean shape fro]n the distance transform of the training shapes, 2) utilizing a tetrahedron method for automatically selecting landmarks on the mean shape, and 3) subsequently propagating these landmarks to each training shape via a distance labeling method. In this paper, we investigate the accuracy and compactness of the 3D model for the human liver built from 50 segmented individual CT data sets. The proposed method is very general without such assumptions and can be applied to other data sets.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.348-356
• /
• 2007

Statistical and probabilistic method was used in the analysis of data, which is the most effective one in describing the various natures, and the methodology relating the results with the design was developed. Influents and effluents of three treatment plants were analyzed and the focus was made on BOD, COD, SS, IN, TP The fluctuations of influent such as BOD, COD, SS were extremely large and their standard deviations(st.dev) were more than 10 mg/L. but those of TN, TP were small; the st.dev was 6.6 mg/L for TN, 0.6 mg/L for TP, respectively. But, effluent concentration showed consistent pattern regardless of the influent fluctuations, the st.dev was ranged between 0.28 and 4.48 mg/L. Effluent distributional characteristics were as follows; BOD, COD were distributed normally, but SS, TN, and TP, log-normally; unsymmetric and skewed to the right. The coefficient of reliability(COR) based on the results of statistics of data was introduced to evaluate the process performance an4 to reflect the process performance to the process design. The coefficient of reliability relates the design value(the goal) with the standards and it can be used in operating treatment facilities under a certain reliability level and/or in evaluating the reliability of the treatment facilities on operation. Each treated water quality of effluent showed the half of water quality standards in the level of 50% percentile and all treatment plant was achieved 100% probability of water quality standards. It was concluded that the variability of the process performance should be reflected to the design procedure and the standards through the analysis based on the statistics and the probability.

• Sleep Medicine and Psychophysiology
• /
• v.7 no.2
• /
• pp.96-101
• /
• 2000

Objectives: Through comparing sleep variables and autonomic activities among three shifts in shift workers, the authors intended to clarify which shift is most tolerable and to identify the characteristics of their psychological and physical problems. This study is also expected to help shift workers to adapt themselves to their work more effectively. Methods: Fifty one shift workers took part in this study. They were working in a rapidly rotating system in which they worked for 3 days in one shift with one day off between each shift. Based on a sleep diary, sleep latency (SL), sleep period time (SPT), and number of wake after sleep onset (NWASO) were estimated and compared among the three shifts. In assessing sleepiness, Epworth sleepiness scale (ESS) and visual analogue scale (VAS) were used. To evaluate mood states among the three shifts, profile of mood states (POMS) was administered. Heart rate variability (HRV), and the level of adrenaline and noradrenaline were measured to assess autonomic activities. HRV included low frequency power (LF), high frequency power (HF), and LF/HF. Results: SPT was significantly lengthened during the evening shift and SL was shortened during the night shift. The workers showed a drop in alertness at wake-up during morning shift and a drop in alertness at work during night shift. During night shift the subjects complained of physical fatigue and cognitive decline. Comparison of HRV showed that parasympathetic activity was most prominent during the evening shift. Secretion of adrenaline and noradrenaline decreased during the evening shift, though statistically not significant. Conclusion: We found that the evening shift was most tolerable among the three shifts. It is recommended that morning light exposure be done during the morning shift and nocturnal light exposure during the night shift.

• Korean Journal of Remote Sensing
• /
• v.32 no.3
• /
• pp.307-321
• /
• 2016

Planetary Boundary Layer Height (PBLH) is a major input parameter for weather forecasting and atmosphere diffusion models. In order to estimate the sub-grid scale variability of PBLH, we need to monitor PBLH data with high spatio-temporal resolution. Accordingly, we introduce a LIdar observation VEhicle (LIVE), and analyze PBLH derived from the lidar loaded in LIVE. PBLH estimated from LIVE shows high correlations with those estimated from both WRF model ($R^2=0.68$) and radiosonde ($R^2=0.72$). However, PBLH from lidar tend to be overestimated in comparison with those from both WRF and radiosonde because lidar appears to detect height of Residual Layer (RL) as PBLH which is overall below near the overlap height (< 300 m). PBLH from lidar with 10 min time resolution shows typical diurnal variation since it grows up after sunrise and reaches the maximum after 2 hours of sun culmination. The average growth rate of PBLH during the analysis period (2014/06/26 ~ 30) is 1.79 (-2.9 ~ 5.7) m $min^{-1}$. In addition, the lidar signal measured from moving LIVE shows that there is very low noise in comparison with that from the stationary observation. The PBLH from LIVE is 1065 m, similar to the value (1150 m) derived from the radiosonde launched at Sokcho. This study suggests that LIVE can observe continuous and reliable PBLH with high resolution in both stationary and mobile systems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.4
• /
• pp.213-220
• /
• 1982

Soil water changes in lysimeters with four different soils and two different available soil depths were monitored during the growing seasons of the soybean-barley cropping from 1977 to 1980 in Suweon to evaluate evapotranspiration (ET) as a function of available soil water and evaporative demand of the atmosphere. ET was calculated with soil water profile and water balance. Soil water content was measured with a neutron moisture depth gauage and The evaporative demand of the atmosphere was estimated with a class A pan evaporation. Rainfall. solar radiation, and wind speed were observed to examine heat and water balances. The average ET of soybeans ranged from 1.6 mm/day at seedling to 6.5 mm/day at flowering, and that of barley ranged from 0.5 mm/day at the regrowth stage to 4.6 mm/day at heading; however, a large variability was observed. The ratio of ET to pan evaporation ($ET/E_o$) ranged from 0.5 to 1.1 for soybeans and 0.4 to 1.2 for barley. The soil evaporation factor ($K_e$) of the $ET/E_o$ component decreased as the soil water depleted and the canopy developed. The crop transpiration factor ($K_t$), another component of $ET/E_o$, also was a function of time and the soil water. $K_t$ was constant when the available soil water fraction (f) in the root zone was greater than a threshold value, and $K_e$ was decreased linearly when f was lower than this threshold. The threshold was 0.7 for the moderate evaporative demand days, 0.4 to 0.5 for the low evaporative demand days, and 0.9 to 0.96 for the high evaporative demand days. Conclusively, the ET can be estimated from the evaporative demand of the atmosphere, $E_o$, $K_e$ and $K_t$, and the available soil water content in the root zone.