• Knowledge Management Research
• /
• v.21 no.2
• /
• pp.119-135
• /
• 2020

Owing to pandemic (COVID-19), the traditional face-to-face education method has been changed to the non-face-to-face real-time online education methods. Using a real time-based video conference system, synchronous education can be adopted by face-to-face class easily. Specially, it is very important to minimize the difference in learning effects between face-to-face and non-face-to-face in Entrepreneurship education. In this study, in order to derive the factors that affect the satisfaction of learners in synchronous online education, authors collected data from learners taking a synchronous entrepreneurship course. Through previous research, learned the reality of education and the composition of lessons. Spatiotemporal effectiveness, mentor ability, and educational environment influence learning satisfaction. PLS-SEM results revealed that it was confirmed that only spatiotemporal effects affect learner satisfaction. However, the education environment (fluent operation and convenience of function use of real-time based online conference system) effect teaching presence, class structure, and spatiotemporal effects. Through this research, we hope to provide theoretical and practical support for developing effective teacher activities, proper lesson structure, convenient function of the conference system, and learner-centered online learning environment when developing synchronous online classes.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.441-447
• /
• 2002

The importance of utilization of ocean space is increased due to high population and narrow land space. The development of a new technology for future use of ocean space, such as a design technology of Very Large Floating Structures(VLFS) is needed. This paper introduces the rime history analysis of superstructures on very large floating structures and proposes the estimation method of time displacement history considering wave loads. The dynamic responses of superstructure according to variation of period and amplitude are analysed using an example frame structure and the dynamic structural safety of VLFS pilot superstructure is evaluated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.3
• /
• pp.323-330
• /
• 2016

This paper describes real-time unbalance moment compensation method for line of sight(LOS) stabilization control systems. The factors of system inertia, frictions and unbalance moment affect the control accuracy of drive systems that are equipped to on the move(OTM) platforms requiring LOS stabilization function. In case of the unbalance moment among those factors is continuously changed as variation of relative angle between gravity vector and drive torque vector. Then, consideration of the effect in real-time is very complicate. Therefore, its effect should be designed to be minimized, however, designing it almost zero is impossible in real condition. In other words, it is hard to achieve target performance overcoming stability issue of highly unbalanced systems. To solve these problems, this paper proposes calculation method of unbalance moment by using measured sensor data for LOS stabilization control and its use for control compensation. Also, kinematical converting process and control structure for compensation are explained. The effectiveness of the proposed method as variation of unbalance moment is verified under simulation circumstance modeled by assuming LOS control system with 2-axis gimbal structure.

• Journal of Fashion Business
• /
• v.1 no.4
• /
• pp.34-48
• /
• 1997

Dresses of the 1950s and 60s when the range and changes of fashion were wide and heavy were closely related with various styles of that time's architecture from the form, use of material, structure to the color. In this, study, characteristics of formalism and brutalism, main architectural streams of that period, such as line, structure, function, material, texture and color are analyzed in detail and these characteristics and those of dress are compared and analyzed to see if there are common aesthetic senses between them. It is particularly noteworthy that at that time formalistic architecture represented joy and abundance through enriched creation of appearance and flowing, symbolic linear beauty while the brutalistic produced young and vivid liveliness through functional, reasonable and moderate beauty, and this young and joyful atmosphere coincided exactly with frank, lively aesthetic senses of the young generation's fashion. Therefore, we can see common significance in the following fact ; architectural modes and fashion art of the 1950s and 60s were the result of more humane and enriched expressions from economical growth, and also product of that time's desire to adapt itself realistically to the rapid, complicated pop culture resulted from mass production.

• Journal of Korea Foundry Society
• /
• v.28 no.3
• /
• pp.129-135
• /
• 2008

The reheating stage of electromagnetically stirred Al billet is a critical factor in the thixoforming process. When reheated to the solid-liquid state, the microstructure evolves to a more globular and more homogeneous structure by a coarsening mechanism, the kinetics depending on the initial microstructure. Microstructural evolution has been characterized by conventional parameters (mean size of particle and shape factor) as a function of holding time in the solid-liquid state. The aim of this study is to report experimental results concerning microstructural evolution in the solid-liquid state of electromagnetically stirred Al billet. The material was elaborated in the form of continuously cast bars solidified with electromagnetic stirring to degenerate the dendritic structure. The choice of the reheating conditions is determined by a dendritic ripening and coalescence mechanism, involving variations of both the shape and size of the particles. The reheating time has to be long enough to allow a minimum degree of spheroidizing, but has to be limited as much as possible in order to avoid excessive ripening. The optimum microstructure was obtained at the reheating temperature of near $584^{\circ}C$ and the holding time of 5 min. The only means of combining high productivity with good casting quality was to use feedstock billets whose microstructure showed rapid transformation characteristics.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.115-121
• /
• 2002

This paper discussed to design system to overcome time, place and service limitation in the case of extracting traffic on active service in the ATM network. There are several specification in this system : for a remote control function, a real-time traffic extraction from ATM link on service without affect in-service, and an O&M(Operating and Maintenance) cost down effect. This paper include the requirement, module structure, operating characteristics and command for the developing function. This product installed at the KT's telephone office. And we have tested the stability, reliability and functionality. As the result, it was verified that this system commercially is abel to use without especial problem. Hereafter, we are improving module structure for the cost down.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.6
• /
• pp.57-73
• /
• 2020

A study was conducted to present the criteria for evaluating the revegetation method of the slope of the expressway. The results of comparative analysis between 2019-2020 field survey and existing research data (2015-2016) are as follows. Soil is a very important factor at the beginning of revegetation work. However, after the plant has settled, the importance of the soil composition diminishes. Among the plants used, the number of plants sown at the beginning gradually decreases. And it changes as it competes with invading plants. Among the plants used for sowing, it was found to affect the vegetation composition in the order of exotic grass > native herb and wildflower > native tree. Plant coverage is continuously evaluated as an important factor regardless of the time. The vegetation structure on the slope will change continuously over time. New items need to be evaluated in situations where a lot of time has elapsed since the application of revegetation work. It is desirable to use the current evaluation standard only to perform the evaluation within 1 to 2 years. In the long run, it is necessary to establish a new evaluation standard that adjusts the weights of each item.

• Structural Engineering and Mechanics
• /
• v.85 no.5
• /
• pp.607-620
• /
• 2023

The classical optimal control (COC) method has been widely used for linear quadratic regulator (LQR) problems of structural control. However, the equation of motion of the structure is incorporated into the optimization model as the constraint condition for the LQR problem, which needs to be solved through the Riccati equation under certain assumptions. In this study, an explicit optimal control (EOC) method is proposed based on the explicit time-domain method (ETDM). By use of the explicit formulation of structural responses, the LQR problem with the constraint of equation of motion can be transformed into an unconstrained optimization problem, and therefore the control law can be derived directly without solving the Riccati equation. To further optimize the weighting parameters adopted in the control law using the gradient-based optimization algorithm, the sensitivities of structural responses and control forces with respect to the weighting parameters are derived analytically based on the explicit expressions of dynamic responses of the controlled structure. Two numerical examples are investigated to demonstrate the feasibility of the EOC method and the optimization scheme for weighting parameters involved in the control law.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1619-1627
• /
• 2014

Wearable computer systems can use the wireless universal serial bus (WUSB) that refers to USB technology that is merged with WiMedia PHY/MAC technical specifications. In this paper, we focus on an integrated system of the wireless USB over the IEEE 802.15.6 wireless body area networks (WBAN) for wireless wearable computer systems supporting U-health services. And a communication structure that performs the time-synchronization is proposed for WUSB over IEEE 802.15.6 hierarchical protocol. Proposed time-synchronization mechanisms adopt the WBAN Polling Access and combine it with a time-synchronization middleware using time stamps. In our performance evaluations, time-synchronization performances with only WBAN Polling Access scheme are analyzed first. After that, performances combined with the time-synchronization middleware are analyzed to evaluate the effectiveness of proposed time-synchronization structure in WUSB over IEEE 802.15.6.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.4
• /
• pp.209-215
• /
• 2009

Reconfigurable array architecture is recently attracting much attention. It is a flexible hardware architecture, which can dynamically change its configuration to execute various functions while maintainning high performance. However, pursuing flexibility and performance at the same time leads to complexity, thereby makes the mapping of applications a difficult process. There have been attempts to use compiler or high level synthesis techniques to solve the problem. In this paper, we propose yet another method, which uses libraries for the mapping to provide an abstracttion of the internal structure and at the same time to reduce the development time and efforts through the automated process. We have selected a JPEG decoder as an example to apply the proposed method. As a result, we obtained about 20% less performance compared to manual mapping but development time is dramatically reduced to less than 1%.