Browse > Article

Microstructural Evolution of Electromagnetically Stirred Al alloy Billet During Isothermal Reheating at the Solid-liquid State  

Lee, Dock-Young (Division of Materials, Korea Institute of Science and Technology)
Publication Information
Journal of Korea Foundry Society / v.28, no.3, 2008 , pp. 129-135 More about this Journal
Abstract
The reheating stage of electromagnetically stirred Al billet is a critical factor in the thixoforming process. When reheated to the solid-liquid state, the microstructure evolves to a more globular and more homogeneous structure by a coarsening mechanism, the kinetics depending on the initial microstructure. Microstructural evolution has been characterized by conventional parameters (mean size of particle and shape factor) as a function of holding time in the solid-liquid state. The aim of this study is to report experimental results concerning microstructural evolution in the solid-liquid state of electromagnetically stirred Al billet. The material was elaborated in the form of continuously cast bars solidified with electromagnetic stirring to degenerate the dendritic structure. The choice of the reheating conditions is determined by a dendritic ripening and coalescence mechanism, involving variations of both the shape and size of the particles. The reheating time has to be long enough to allow a minimum degree of spheroidizing, but has to be limited as much as possible in order to avoid excessive ripening. The optimum microstructure was obtained at the reheating temperature of near $584^{\circ}C$ and the holding time of 5 min. The only means of combining high productivity with good casting quality was to use feedstock billets whose microstructure showed rapid transformation characteristics.
Keywords
Semisolid; Electromagnetic stirring; Reheating; Coarsening;
Citations & Related Records
연도 인용수 순위
  • Reference
1 D.B. Spenser, Ph.D. Thesis, MIT, Cambridge, MA, (1971)
2 S.C. Bergsma, X. Li, M.E. Kassner, Mater. Sci. Eng., "Semisolid thermal transformations in Al-Si alloys: II. the optimized tensile and fatigue properties of semi-solid 357 and modified 319 aluminum alloys", A297 (2001) 69-77
3 J.W.K. van Boggelen, D.G. Eskin, L, Katgerman, Scripta Mater., "First stages of grain coarsening in semi-solid AlCu alloys", 49, (2003) 717-722   DOI   ScienceOn
4 M. Mabuchi, K. Ameyama, H. Iwasaki K. Higashi, Acta Mater., "Low temperature superplasticity of AZ91 magnesium alloy with non-equilibrium grain boundaries" 47 (1999) 2047-2057   DOI   ScienceOn
5 Czerwinski F. Acta Mater., "The oxidation behaviour of an AZ91D magnesium alloy at high temperatures" 50 (2002) 2639-2654   DOI   ScienceOn
6 D. A. Porter, K. E. Easterling: "Phase Transformations in Metals and Alloys", (1991)
7 J. Campbell, International Met. Reviews, vol. 2 (1981), p.71
8 A. Hellawell, S. Liu and A. Z. Lu: JOM March(1997), p18]
9 Dehong Lu, Yehua Jiang, Guisheng Guan, Rongfeng Zhou, Zhenhua Li, Rong Zhou, Jour. of Mater. Process. Tech., "Refinement of primary Si in hypereutectic AlSi alloy by electromagnetic stirring" 189 (2007) 13-18   DOI   ScienceOn
10 T.H. Courtney, Scripta Metall., "Fault migration vs. twodimensional ostwald ripening as a mechanism for coarsening of rod eutectics", 9 (1975) 1219-1223   DOI   ScienceOn
11 T. Sumitomo, D.H Stjohn, T. Steinberg Mater. Sci. Eng., "The shear behaviour of partially solidified Al-Si-Cu alloys", A289 (2000) 18-29
12 Dock Young Lee, et al., Rare metals "Effect of the casting speed on microstructure and segregation of electromagnetically stirred Al alloy in continuous casting process" 25 (spec), (2006) 118-123
13 R. N. Hills, P. H. Roberts, International Jour. of Non-Linear Mechanics, "Microstructural coarsening kinetics for a mushy zone of a pure material" 32 (1997) 1003-1013   DOI   ScienceOn
14 D. Y. Lee, K. B. Kim and D. H. Kim, Mater. Sci. Forum, "Microstructural effects of electromagnetic stirring strength and casting speed in continuous casting of Al alloy" 449 (2004) 321   DOI
15 W.R. Loue, M. Suery, Mater. Sci. Eng., "Microstructural evolution during partial remelting of Al-Si7-Mg alloys", A.203 (1995) 1-13
16 D. R. Harbur, M. C. Flemings, J. W. Anderson, W. J. Maraman, Jour. of Nuclear Mater., "Preparation of sound high purity plutonium rods : Part 2. Observed phase transformations during quenching from elevated temperatures" 33 (1969) 195-207   DOI   ScienceOn
17 P.A. Joly, R. Mehrabian, J. Mater. Sci., "The rheology of a partially solid alloy", (1976) 1393-1401
18 D.B. Spenser, R.mehrabian, and M.C.Flemings, Metall. Trans., "Rheological behavior of Sn-15 Pct Pb in the crystallization range", 3 (1972) 1925-1932   DOI
19 S. Sannes, H. Gjestland, L. Arnberg and J. K. Solberg, The 3rd int. Conf. (1994) 75
20 N. Akaiwa, S.C. Hardy, P.W. Voorhees Acta Metall. Mater., "The effects of convection on Ostwald ripening in solid-liquid mixtures", 39 (1991) 2931-2942   DOI   ScienceOn
21 S.C. Bergsma, M.C. Toll, M.E. Kassner, X. Li, E. Evangelista, Mater. Sci. Eng., "Semi-solid thermal transformations of AlSi alloys and the resulting mechanical properties", A.237 (1997) 24-34
22 Y. H. Chen, Ph. D. Dissertation, The Ohio State University, "Study of solidification, Shrinkage and Natural Convection in Casting Processing", (1990) 15-23
23 I. M. Lifshitz and V. V. Slyozov, Jour. of Physics and Chem. of Solids, "The kinetics of precipitation from supersaturated solid solutions", 19 (1961) 35-50   DOI   ScienceOn
24 M. Suery, M.C. Flemings, Metall. Trans., "Effect of strain rate on deformation behavior of semi-solid dendritic alloys", 13A (1982) 1809-1819
25 Metals handbook, 9th ed., vol. 2, American Society for metals (1979) 164-166