• Tribology and Lubricants
• /
• 제17권5호
• /
• pp.399-405
• /
• 2001

In this paper the ball-on-disk type sliding tests with boundary lubricated steels were carried out to verify the relation between surface profiles and wear as well as scuffing. Three kinds of surface roughness and asperity radius were produced on AISI 1045 steels using the different processes of grinding and polishing. Frictional forces and time to scuffing were measured. Also, the shape and amount of wear particles were analyzed to compare with original profiles. From the tests, it was confirmed that the size of wear particles are very related to original surface profile. The time to failures and wear amounts were sensitive to the surface spacing. The large surface spacing shows much longer sliding life and smaller wear amount than the others. Time to scuffing was increased with increasing surface profile spacing. The sire of wear particles was increased and the amount was decreased with increasing surface profile spacing. Wear volume and wear rate K were decreased with increasing surface profile spacing. And after sliding tests, surface cracks of inner parts of the wear track occurred scuffing were observed and compared the differences about each specimen having the different surface profile spacing.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.64-71
• /
• 2001

In this paper the ball-on-disk type sliding tests with boundary lubricated steels were carried out to verify the relation between surface profiles and wear as well as scuffing. Three kinds of surface roughness and asperity radius were produced on AISI 1045 steels using the different processes of grinding and polishing. Frictional forces and time to scuffing were measured. Also, the shape and amount of wear particles were analyzed to compare with original profiles. From the tests, it was confirmed that the size of wear particles are very related to original surface profile. The time to failures and wear amounts were sensitive to the surface spacing. The large surface spacing shows much longer sliding life and smaller wear amount than the others. Time to scuffing was increased with increasing surface profile spacing. The size of wear particles was increased and the amount was decreased with increasing surface profile spacing. Wear volume and wear rate K were decreased with increasing surface profile spacing. And after sliding tests, surface cracks of inner parts of the wear track occurred scuffing were observed and compared the differences about each specimen having the different surface profile spacing.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제8권4호
• /
• pp.270-275
• /
• 2008

Under ubiquitous environment, recommendation system is using the collaborative filtering methods by quantifying context information, but insufficient context information can cause inaccurate recommendation result. In order to solve such problems, the researcher used context information and user's profile. But service history information in users' profiles can have the problems of being influenced by change of the user's taste or fashion as time passes by. In addition, context information and user's profile can't be properly inter-locked according to situation, which can cause inaccurate predictability. In this paper, in case a user's taste or fashion is changed as time passes by, the researcher didn't apply bundled-up value to the user's profile but applied different weight according to change of time. And the researcher could solve the problem that context information and a user's profile can't be properly inter-locked according to situation by applying different weight to the result gained by means of collaborative filtering and then by unifying it. In such ways, the researcher could improve predictability.

• 정보처리학회논문지C
• /
• 제15C권1호
• /
• pp.69-78
• /
• 2008

본 논문에서는 적응화된 콘텐츠 서비스를 위해 콘텐츠 적응화 시스템에서 효율적으로 사용자 프로파일을 교환하는 방법을 제안한다. 사용자에게 적응화된 콘텐츠를 제공하기 위해 프로파일들은 콘텐츠 적응화 시스템의 디바이스들 간에 지속적으로 교환된다. 또한 프로파일들은 주기적, 비주기적, 이벤트, 요청 및 응답에 따라 교환되어야 한다. 따라서 많은 네트워크 트랙픽이 발생하며 컴퓨팅 파워를 필요로 한다. 이와 같은 문제점들을 해결하기 위한 프로파일 교환 연구가 필요하다. 효율적인 프로파일 교환을 위하여 콘텐츠 적응화 시스템에서 프로파일 생성 정보, 교환 정보, 교환 형태 등을 분석하고 분석된 프로파일 정보들을 이용하여 프로파일 교환 절차를 정의하였다. 또한 프로파일 처리 시간을 줄이는 프로파일 구성 정보 제공 방법과 프로파일 전송횟수를 줄이는 사용자 설정 값 방법을 제안하였다. 성능 평가 결과 프로파일 구성정보 제공 방법은 프로파일 처리 시간을 7%로 단축시켰으며, 사용자 설정 방법은 프로파일 전송횟수를 줄여 프로파일 교환에 효율적이었다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.350-353
• /
• 2007

This paper presents an real-time implementation of H.264/AVC High 4:4:4 Predictive profile decoder using general-purpose processors by exploiting multi-threading technique and Single Instruction Multiple Data (SIMD) instructions without any quality degradation. We analyze differences between the existing High profile and High 4:4:4 Predictive profile decoder, and show various optimization techniques to decode high fidelity and high definition (HD) video in real-time. Simulation results show that the proposed decoder can play high fidelity HD video at average 40 frames per seconds (fps) for the IBBrBP bistream and about 50 fps for the Intra-only bitstream.

• 한국가구학회지
• /
• 제20권2호
• /
• pp.122-135
• /
• 2009

The objective of this work was to research click profile of laminate flooring by comparison of click and bonding laminate floorings, especially base on the click profile shape, bonding strength and international patents. Non-glue locking system has been used since laminate flooring was developed. For the reason of environment and saving installation time, the manufacturer in Europe and USA has developed click profile for laminate flooring. Each manufacturer has patent on each click profile. Although each click profile has good lock strength as shape, Berryand Unilin company's click profile systems showed higher locking strength than others. Korean laminate flooring company pay the fee of patent for using European and American manufacturer's click profile. From this work, we grope Korean style laminate flooring and click profile through research on the click profile shape, bonding strength and patents of European and American manufacturers.

• 전력전자학회논문지
• /
• 제12권3호
• /
• pp.221-233
• /
• 2007

본 논문에서는 고성능 단축 선형전동기에 적용할 수 있는 최단시간 위치 패턴 알고리즘에 대하여 논한다. 근래 들어 LCD/PDP 및 반도체 산업이 발달함에 따라 대형의 고성능 위치제어 시스템에 대한 요구가 높아지고 있으며 이러한 시스템에서는 공정 주기의 단축을 위하여 시간요소를 최소화시킨 최적 위치 패턴이 반드시 필요하다. 특히 반도체 산업 분야에서는 공작기계 분야와 달리 3차원 입체 위치 패턴보다는 단축 패턴에 대한 수요가 비교적 많은 편이다. 본 연구에서는 가속도가 사다리형인 위치 패턴을 기본으로 하여 연구를 진행하였으며 위치 및 시간을 변수로 고려한 패턴 분석을 통하여 최단시간에 목적하는 위치에 도달하기 위한 패턴을 비교적 간단히 구현할 수 있음을 보이고 이를 시뮬레이션 및 간이 실험으로 구현 가능성을 입증하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.210-212
• /
• 2022

제조업에서 생산 설비의 상태를 모니터링하기 위해 각종 센서를 부착하고 있으며, 이를 통해 획득된 데이터의 경우 시계열 데이터인 경우가 많다. 생산 설비의 이상 여부를 판단하기 위해서는시계열 데이터로부터 패턴을 추출하는 과정이 선행되어야 하며 다양한 방법이 연구되고 있다. 본 논문에서는 수집된 다변량 시계열 데이터로부터 패턴을 추출하기 위해 매트릭스 프로파일 알고리즘을 적용하였으며, 이를 통해 현재 CNC 머신으로부터 수집 중인 다중 센서 데이터의 패턴을 추출하였다.

• 소음진동
• /
• 제10권2호
• /
• pp.221-228
• /
• 2000

In this paper, analytical study is performed to reduce residual vibration in seeking mode of optical pick-up. The conditions for acceleration adn deceleration time in trapezoidal velocity profile to reduce residual vibration are derived for undamped vibration system. To verify the validity of conditiosn two example studies are carried out. Numerical and experimental implementations for flexible arm system attached to moving part show that residual vibration is effectively reduced by calculated velocity profile. In addition, simulation study for optical pick-up reveals that by changing natural frequency to resonance frequency the conditions derived assuming undamped system can be applied to obtain velocity profile for minimum residual energy in damped vibration system.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.184-188
• /
• 2002

In 2D-Profile machining using cutter radius compensation cutter interferences are very common. To prevent the cutter interferences undercuts are inevitable in some regions of the profile. The undercut regions require cleanup machining using smaller radius tools. This paper considers a procedure of the tool path generation for the cleanup profile machining. And two methods are introduced for an efficient tool path generation. One is how to reduce the machining time by uniting adjacent tool paths of undercut regions, and the other is how to find the tool path with the minimal distance by applying TSP algorithm.